How-To Machine a Chevy 350 Small Block Engine (Machine Shop)

[XboxGamerKidd]

what is the diff between a big block and a small block and how do you tell cause like what if i have a 90 cube engine and take a 45 cube motor and what one is a big block or are the both small block but how do you tell

[TheBopop]

decent info on here im subscribing.

[citydriver]

wait during the honing section  you can see hes honing without the torque plate whats with that?

[AtlasCoatingsAndCons]

I know they are a necessary evil :D You got it! You guys have NICE videos!

[motorztv]

@AtlasCoatingsAndCons Thanks again!!

[AtlasCoatingsAndCons]

love the video, don't like the adverts though.

[motorztv]

@AtlasCoatingsAndCons Thank you! The sponsors keep the show going :)

[Codythecartaker]

QUESTIONS!!doun there.....  new crank,new barings.(my reading is .002") that should be A OK right i had it bord .030 over my new pistion and rings fit good i think i cant remember i have like .016 ring gap so my question is im looking at 450hp i got all the parts and my readings are GOLD plastigauge and what not...my question is,is my motor ready to be built and last long time....it be very helpfull and id feel more confident on building this 355sbc

[calebmodding]

Cant wait for the next episode :D

[motorztv]

@calebmodding It's coming very soon!

[civiclover69]

Wtf ads in YouTube videos like tv??

[motorztv]

@civiclover69 Yes. It's a TV show :) Watch it every week on DIRECTV and DISH Network, and on My Family TV

[madisonelectronic]

Your teeth (caps) are white. Now bleach your nipples.

[weasel744]

Whats the average machine job like this cost someone?

[PRSCheVelle]

wheres the rebuild video on this engine ??????

[motorztv]

@PRSCheVelle The next episode (out within the next week or so) will be rebuilding the bottom end, followed by the rebuild of the top end episode!

[renthal971]

Can I get E3 plugs if you reply to my question on youtube?

[motorztv]

@renthal971 Was your question asked on the show? That's the only way you can get the free spark plugs :)

[renthal971]

What is that tool box in the corner of the garage?

[motorztv]

@renthal971 Tools!

[jwschwindt1]

Who is the beauty at the start of the show here? Wow! I'd just like to know here name

[motorztv]

@jwschwindt1 Her name is Olivia Korte. You can see more at motorzgirl (dot) com

[ithree6mafia]

she is super hot and these videos are really good. Nice combo there Chris.

[motorztv]

@ithree6mafia Thank you for the feedback!

[89Carfreak]

Any updates on this yet? ...By the way; my condolences on your loss.

[motorztv]

@89Carfreak The next episode out will be on the bottom end rebuild. Thanks!

[89Carfreak]

@motorztv When do you expect the next episode to be out?

[motorztv]

@89Carfreak By the end of the month.

[89Carfreak]

@motorztv Well?

[motorztv]

@89Carfreak Thank you for your patience! We're wrapping it up so look for it soon!

[bsl3216]

Hey just saw that you dad passed away I'm so sorry for your loss

[cooskatekid3]

Hi let me start off by saying thanks for all the helpful videos... i was wondering if i could use the iTSX on my car and could u use it on eny car?? it dosent say u cant on the app or website

[d3v3ouzm1ndz]

Sorry for your loss Chris. Keep your head up bro, keep doing what your doing and make him proud!!

[wbc564]

Oh, sorry for your loss

[wbc564]

Did you guys get cancelled or somehing?

[motorztv]

@wbc564 No. Chris' Dad passed away recently and has obviously caused some delays in the next episode coming out (which will be out within the next few weeks).

[SouthsideLeo]

my 355 (350 bored .030 over) block will be out the machine shop friday..so i'm hoping the new video will be up so I get started on this build...when's the new video coming bro??

[motorztv]

@SouthsideLeo The next episode won't be about the small block, but the 2 or 3 which follow that one will. We'll try to post them as quickly as we can! Thanks for watching.

[Kenster1025]

olivia korte is the girl, damn she is hot.

[BigAgitator]

Those pass through ratchets are bad ass!!!!

[partyboyperk]

whens will the next video be up

[motorztv]

@partyboyperk Within the next week or two :) Thanks!

[Smigjo]

@motorztv HURRY UP! Jeez man, how hard could it be? :) I'm excited to see what you all do with this SB.

[motorztv]

@Smigjo That part's easy... it's the post-production part that takes time :)

[railman11]

OMG I WAS ON THE SHOW!!!!

AWESOME

[BigAgitator]

@railman11 That's bad ass, man. The remote start is a sweet touch.

[peelout40]

$400/$500 sounds like a bargain for all the work they did, and they let you get in there too.

[MrRedneckjosh]

how much did it cost for this 350?

[motorztv]

@MrRedneckjosh Please see the responses below... thanks!

[MrFreddy1201]

13:50 LOL

[motorztv]

@MrFreddy1201 Thanks... that was really my daughter too!

[benzbubblecat]

I am curious to see how the cost of the rebuilt compares to the cost of a crate motor. That machining looked expensive.

[motorztv]

@benzbubblecat $400-$500 for the machining

[TWBradshaw]

My birthday block is coming along nicely !

[nuccit]

Thanks for reading an answering my letter in the video!

[motorztv]

@nuccit Thanks for sending in the letter! You'll hear from us soon about the spark plugs!

[socalcolby123]

This is my favorite show to watch on youtube!

[motorztv]

@socalcolby123 That's great to hear! Thanks for being a superfan! :)

[brannyK051]

How much did all that machine work cost?

[motorztv]

@brannyK051 $400-$500 for a job like this

[hen555]

good videography too btw

[motorztv]

@hen555 Thank you!

[sbvikings30]

what every good car show needs, a hot girl.

[motorztv]

@sbvikings30 We agree... and we're stoked to have found Olivia. She's *awesome*!

[d3v3ouzm1ndz]

I didn't watch it yet but I know it's going to be good!! Why does it take two weeks before you post????????? The anticipation kills me!!

[motorztv]

@d3v3ouzm1ndz We operate with very limited resources and it takes 3-4 weeks to produce new episodes at this level of quality. Thank you for your patience. We hope to be able to produce them faster in the future once we have more resources.

[k24hybrid]

Excellent show!!! thanks for uploading it to youtube!!! :D

[motorztv]

@k24hybrid Thank you for watching!

[Bulgdoom]

Lmao i chuckle every-time that Nate bluetool guy comes on, he doesnt look like he knows tools or comfortable

[motorztv]

@Bulgdoom Nate does a great job... probably not much on-camera time, though.

[67mustangreg]

You're going to drop this in a foxbody right? Great video but the ads are so blatent. Brings it down a notch for me, but if that's who's paying the bills....

[MrBombastic16]

@67mustangreg put a CHEVY 350 in a Ford ? Isn't That Hypocritical ?

[motorztv]

@67mustangreg You got it. Without sponsors, we don't have a show!

[Terreos]

Chris don't be teasing me with more mustang parts unless you're gonna make another episode. Heck this show is the reason I bought a mustang with all the aftermarket parts you've showed. lol. Keep up the great work. Always love your teams hard work.

[motorztv]

@Terreos Thanks man! We are definitely going to have more Mustang stuff... right now we're focusing on the Chevy 350 rebuild. We've done quite a lot to our Mustangs over the past few seasons... what else is left to do? LOL

[Terreos]

@Terreos Well you're team has done superchargers and nitrous oxide. So theoretically you can still do a turbocharger or just more engine builds for camshafts, heads, or forged internals. But, you're chevy 350 videos give alot of insight on such things. So I say go turbo!

[CyFi6]

You showed them installing the torque plate, but then it was gone when they started honing? What gives?

[motorztv]

@CyFi6 Good eye! Some clips are out of sequence there, but if you do look close you can find one of those has the torque plate :)

[hp11208]

Cute girl

[reallunacy]

I like the tuner. They have had options like this for a while now, though I don't think they actually had a tuning option. Search Torque on the Android Market to see what I currently have. Of course right after I got the app I got booted back to using a '92.

[RicardoGuajardoTV]

Finally, ive been waiting for this !!!

[motorztv]

@RicardoGuajardoTV Ricardo, thanks... hope you like the whole episode!

[aikenforjeff]

that girl is hot as hell

[motorztv]

@aikenforjeff Thanks--she'll be stoked to read this! We love our Motorz Girl! You can find out more info by going to motorzgirl(dot)com

[redpearl99]

thank you for finally posting this video, been waiting for a long time

[motorztv]

@redpearl99 Thanks for waiting! If you missed the first episode of S05 (small block teardown), be sure to catch that as well!

[leonox123]

00:05 is not a small block ;)



[motorztv]

@leonox123 No, that part isn't. Watch a little further into the episode :)

[AtanasiuGabriel]

10x god :* i love you !!!!

[motorztv]

@AtanasiuGabriel Thanks!