Multiplex Fox Electric RC EPP plane Conversion into a mini Pylon racer

[StingMic]

plane good, but music terrible!!!!!

[GeneticallySuperior1]

This music reflects the condition of today's world & the evils of the zionest jews in their ploy to dominate the world. DEATH to the zionest who wish to take our freedoms !

[nitroairplane]

@GeneticallySuperior1 you are a racist arsehole!!!

[GeneticallySuperior1]

@nitroairplane & your a faggot! what can we do about it? NOTHING!!!

[24262748]

Music is sucks !!!!

[kalliber5]

Hi,

i saw the discription, can you also use the 9g servo? ive got a lot of hxt900

and what lipo (2s or 3s) is it?

like your mod.

[TheRattleSnake3145]

@kalliber5

you did read the text at the start of the video didn't you?

[MrNorthstar50]

Rather hear motor, than lame music!

[bmx391xmb]

wtf is with the music lol???

[justkillen07]

were can i buy one?

[brettwinstead]

It is a shame you did not choose some really creepy music. I would have like that

[mullyscans]

mean little bird dude.

[normanthehobbiest]

music is nice but not this srry

[jasmine2501]

This video is haunting - you've got the weird music and the ominous looking clouds and occasionally there is this flash of an airplane... very scary...

[PotholesInMyLawn]

may I ask what song>>? Thanks

[wickedinsight]

@PotholesInMyLawn Karl Jenkins - Dona Nobis Pacem :)

[jjswimmer2014]

no rudder only alerions that is a first ...

[cristianomaddog]

Lil Bullet!

[norstaroption]

Whats your CG?

[norstaroption]

Nevermind I found it 1 inch from LE.

[wickedinsight]

@norstaroption ya the original CG out of the box is midway the wing, when you modify the plane, CG changes to about 1 inch from leading edge, so you are correct :)

[Timmie1000]

@wickedinsight Does the CG also move to the front (like you said 1 inch from LE) if you convert the MPX fox to RC without a motor? Because I'm now busy with my conversion and I'm building the fox as a glider.

Tim

[wickedinsight]

@Timmie1000 CG should not change if you dont touch the nose, stick with the original CG as the glider comes with

[keeprighton2007]

nice job. would rather have heard the motor in the air, rather than the music.

[wickedinsight]

@keeprighton2007 was to windy and plane is to small to hear anything, so music seemed the only way ;)

[winaces]

@wickedinsight hello your music is not nice,and to be honnest, and i hope you can take some critick if ness.

i got the mtx fox the Fox scale and i'm going to make the small fox trowglider olso brushles, but you will not dee a servo on my plane. Sorry yours is ugy, and your movie is of a verry bad quality. enyway when i start converting my Multiplex Fox then youl see the difference.

[MrLowAltitude]

Great!

[sk8rboy1255555]

The kinda music where someone ends up getting snipered

[rickmacalpine]

nice music!!!

love your pilot's skills too!

greets from vienna/ austria!

rick

[wickedinsight]

@rickmacalpine thank you Rick

[elcotorro]

hermoso¡¡¡¡ un saludo desde Guadalajara jalisco.

[wickedinsight]

@elcotorro gracias, los saludos a usted mi amigo

[MEGAS1LORD1DEVIN]

5/5

[anthony3leaves]

dude!!! u NEEEEEEEED 2 CANGE THE MUSIC!!!!!!! IT MAKES ME FEEL LIKE IM IN INDIA!!!!!!!!!!!

[wickedinsight]

@anthony3leaves the music is far from being an Indian tune or chant

[MrAwazar]

i love rc models

[ballores]

hi would love to learn to fly picked up a fox recently have aradio and micro size servos could you point me in the right direction for motor esc and battery would like to go slower rather than faster don't wish to learn at a club hopefully will get the hang of it eventually also what size prop cheers Nick

[imakeitworst]

I especially love the many sections of the video where there is nothing in the frame or a speck you can't make out.

[wickedinsight]

i know, this plane is so small and fast it was hard to video im sorry, watching it in HD and full scree is much better if your PC can handle it ;)

[nateflite]

when i get mine finished ill show you how i secured it on. that will be in like 3 days. im on my 4th fox lol

[wickedinsight]

sounds good, hit me up with your done

[nateflite]

did you just secure your battery with velcro?

[wickedinsight]

yes but i found out the hard way that with fast planes like this, its best to secure the battery a little better then just with velcro, my next fox i will have to think of a better way to secure the battery

[JAyThaRevo]

what does the "2900KV" stand for?

[wickedinsight]

KV stands for rpm/volt or ( kiloVolt) "K" is the scientific notation for a constant and "V" stands for Volts.

in layman's terms, its how fast the motor spins :)

[JAyThaRevo]

so this motor has 2900 rpm/v

if i got that right thanks for clearing this out!

[wickedinsight]

yes it sure does :) also note, the higher the KV of a motor, the smaller the propeller size, once you work with different KV motors, you'll get a feel of what prop to use, e.g 900kv motor will spin 11x6 prop, 1200KV motor will spin 9x4, 2200kv motor will spin 6x4 prop, of course there is also the variable of what voltage/cell count your battery is, lower the voltage of your battery, the bigger the prop, higher the voltage/cell count, smaller the prop

[PetesWifeLuv]

what prop would you recommend for hyperion 6t 2100kv brushless and what accessory do i need to mount it ?It looks as though i need simmilar to the one on your hacker motor.

[wickedinsight]

the hyperion 6 turn 2100kv is a great little motor, it will take a 3S lipo and it will spin a 6x4 GWS slow fly prop, as for the mounting, i just used the cross back plate and glued that on directly to the front of the fox, of course i cut the front of the plane for an even smooth surface. hope that helps

[PetesWifeLuv]

Is the angle you cut off the nose vertical to the fusalidge  or the wing?

[wickedinsight]

fuselage, since angle of the wing is for better lift i assume

[PetesWifeLuv]

thanks for the quick response.I'm using a hyperion 450mAh 3S lipo with titan 10 p31 speed controller.Call me stupid but how are you actually mounting your prop to your motor?At a guess are you using one of the o'rings supplied with motor to tie prop?

[wickedinsight]

thats a good setup, i mounted the prop using a pro saver, its the O ring, your motor should be mounted the same way, make sure you use the smallest O rings, or else the prop will come off the motor in mid air: PS, you can buy O rings for cheap at home depot, dont buy them from hobby shops, or if you know a plummer they have plenty, a good friend of mine gave me bags and bags, god bless him ;)

[PetesWifeLuv]

Just as a guide could you give me a rough idea as to a good position for c/g on wing please.

[wickedinsight]

i believe the CG was 1/3 from the leading edge, i first threw the plane as it was intended and it flew great, marked the CG which was somewhere in the middle of the wing, but when i slapped on my gear and flew the plane, boy was the CG wrong, it was way off, so try 1/3 and go from there

[nateflite]

It means 2,900 RPM per volt.

[Carbeek]

What type of motor did you use ?

[wickedinsight]

i used a Hacker A10-12S which is a 2900Kv outrunner, on a 5x3 GWS prop, this thing litttle fox screams power ;)

[Carbeek]

thanks !

And how many amps is the speed controler ?

[wickedinsight]

any time :) send me a video when its done would love to see her fly

[wickedinsight]

i believe an inch from the leading edge

[xmodscarbonslost]

How long did it take to do all this, and where did you buy all of the electronics?

[Pook365]

How well does it handle wind?

[wickedinsight]

if your a good pilot, it handles wind great, specially with my setup, its a little heavy but super fast and zipps through the wind your watching now there was 15mp winds easy

[pbalchemique]

Nice one mate! I have fox with the same motor and 2s batteries, 4,75x4,75 prop, will need to see how it performs on 3s :)

Check my videos!

[Gig540]

wow that little thing is moving out! Very nice. Whats name of that song btw?

[wickedinsight]

i wish i can tellyou the name of the song, i just picked it out of my million and one song list, so going back and trying to findit is like trying to find your RC plane in the grand cannon after a signal loss :P

[Gig540]

haha no doubt!

[CHELLIE2408]

Nice job on the conversion, it flies great, just keep it under 100 MPH :) LOL Take care, Chellie from Wattflyers

[wickedinsight]

thanks Chellie, good to see you again :)