Beginner balisong butterfly knife tricks + y2k tutorial part 2

[Fuket322]

good video homie keep posting tricks it really helped me out get use to using my butterfly knife

[vatress1]

you WILL drop this the first time....but its ok this is a beginners trick?



[xesoprothesmo]

Thank you very much for the vids helped me a lot, I got a balisong yesterday and thanks to you I've learned many tricks. :)

[Jgoravens23]

the best videos yet. this helped me out a lot. im borrowing my little brothers knife and got down all of these tricks. now just have to get the technique down. i have trouble with the blade following the bite handle sometimes, do you have any suggestions on that problem?

[LongRangeBullet]

lololololol. I'm trying to do these with a multitool.

[FatGuyWithAKatana]

why this flagged?

[BanditReloaded22]

one of the best y2k tutorials

[doublependulum]

If you get crap from duct tape on the blade, the best way to get it off is to wet either your index or thumb and rub it GENTLY.

[terminater58]

Cool I don't have a real butterfly knife I just have 1 I made out of Lego prices but it works fine and that last trick you taught us I finally got it down but sometimes I get it in a reverse position :/

[nokkahuilukostaja]

Thanks for these tutorials! I can do the tricks from the first part alright, and I'm now training the y2k trick. The only problem is, as you said I have a cheap knife that breaks apart when it falls to the floor (I've had to fix it a couple times). I didn't even think about training above a bed or something softer, thanks for clearing up my mind xD

[jameshalo100]

where can i get that knife i have 3 butterflys i forget which ones they are and i have a trainer where can i get the benchmde 42 at and tats not no rediculos price

[catcat646]

How many little nicks are on your hands from doing this? lol

[lovegame134]

Its a benchmade 42. Awsome knife. I have two

[noobrun121]

What type of knife is that and where did you get it

[noobrun121]

Wat

[NightHawk0730]

Thanks. i can pretty much do all the moves from your videos.

[CODFreak27000]

I did the Y2K perfectly the first time i did it then couldnt do it again until (at least) my 10th

[cardinalbball]

would having experience in pen spinning help with this??? O_O

[Bodiche1]

Dude so far your vids are the only ones that have taught me tricks, for some reason you explaine it better then anyother tutor i could find good job.

[KidZeroTube]

i got a sharp one for my first and you get a few cuts but nothing to serious :)

[DisturbingTh3Peace]

I hate when people say Y2K is intermediate it's the first trick I learned...

[Killer49140520]

Thanks for your videos they've helped me alot.

[birdlehirdle]

Thanks for the tutorials! It looks really intimidating buy I've actually learned these tricks in a few hours. A tip for other beginners: if you think you're going to drop the knife, just let it go. I learned that the hard way.

[joshbowen18]

How does one go about closing the knife after the y2k rollover? I can do the trick pretty easily now but I'm using using one of my other closings right now and it means if I want to do the y2k rollover again I have to adjust my grip on the knife, doesn't look as fluid.

[STEALTHCLOWN1000]

did u use to play black ops because i knew a guy named y2k

[Nichordnaruto]

mines a bottle opener, but i still reckon its awesome

[silentbutdeadly333]

Why r there two channels with all of your vids?

[brazzii]

is there a website to get those good knifes?

[Carry2Sky]

you know what sucks? i keep getting lost on these because i use both hands and i use my left for my knife, it doesn't help that the latch is on the saf handle too D:

[supersunflag]

LOL i just tried the y2k trick and it did INDEED go flying..

[TheBakerboy12]

If you have to say "uhh anyway" or "i don't know" you've failed making a tutorial.

[Modz4uteam]

if your a drummer you can use the snap noises to memorise the trick,for example the first trick makes a little beat. try to mimic the beat every time you do it to help

[owizzle55555]

I'm sorry but I don't get this tutorial your other one(part 1) was better.

[opticXxquickscopexX]

did you get that balisong from bud k im prob getting one from there

[TheKingsp8d]

There was no 9:48

[403nomad]

@TheKingsp8d Don't you have anything better to do? :D

[TheKingsp8d]

@403nomad not really

[Carry2Sky]

thanks for the tutorials, i dont a have enough money for a training knife, im wondering if a glove wouldn't make my hand too clumsy?

[mrneumann5000]

@Carry2Sky Like I said in the first part of this video, you can always buy a trainer knife or tape the blade up with masking tape. Those are your two best options. Gloves are very hard to flip in.

[Carry2Sky]

@mrneumann5000 thanks i hadnt thought of that :D

[TehEvilWolf]

@Carry2Sky go to amazon man, I got my training balisong for about $5

[Carry2Sky]

@TehEvilWolf i got something better, got one with a dulled blade and a regular one :D

[kaichithepocketpimp]

@Carry2Sky if ur really scared then just tape the blade. but as long as ur not doing bite handle tricks ull b fine. im 13 and ive only cut myself twice and u can barely feel it.

[Carry2Sky]

@kaichithepocketpimp got a dulled one and a real one :P

[whowantssomeofdeebo]

@Carry2Sky i started with a real knife....

[Carry2Sky]

@whowantssomeofdeebo i have one now :x

[whowantssomeofdeebo]

@Carry2Sky goodman, man up to that shit



[iisduncan]

you know u can buy ones which are bottle openers not blades?

[and1and2]

@iisduncan you can get it from Amazon or if your in AUS, global gear

[ManiacGamingNetwork]

I just learned this move and I didn't get cut and I've only had a balisong for 2 days. A trick to this is to twist the handle if it's hitting ur palm. Real easy and fucking awesome looking

[m4killed]

Great u taught me all the tricks ur vid really really helped can u make a intermediate video please???

[juggaloinflorida]

i got the y2k at a 90 to the floor in like 2 mins

this is fuckin awesome !!!!!!!

[TheHankwilliamsjr]

thx dude with ur vids i went from sucking to being able to show off to my friends

[LinksFan123]

subscribed .your worth it knife you got hella cool videos

[HashSIingingSIasher]

beggining moves? that shit is impossible

[chickensandw1tch]

with only 2 cuts lolol xxDD

[chickensandw1tch]

yay i learnt Y2K today haha ^^

[willsleepforZzZz]

i know that first open by rote because when i had my bali i would just sit and watch TV or do whatever and just open it and close it constantly and i have no idea why but i did and now that my bali is broken it just feels so weird not to be able to do it but im geting a bradley kimura VI on the 12th for my b-day

CANT WAIT!!!!!!!!!!!!!!!!

[cmtification]

someone flagged your first video

[lothbroke]

WD40 takes duct tape leaving off anything

[1CherokeeChief]

How didn't you cut off your finger?

[mightytofulion]

I can't understand 2:42. I think it would help if you could actually see the whole knife instead of most of the move being off shot with you going "umm....yeh...ummmmm spin it like this....ummmmm" to help.

[BleachFreaK14]

That's a benchmade 42 right?

[mrneumann5000]

@BleachFreaK14 yes sir.

[BleachFreaK14]

@mrneumann5000 How much did you pay for it? If you don't mind me asking.

[mrneumann5000]

@BleachFreaK14 $140, a long time ago when prices wern't rediculous.

[jacobgnarlif]

awasome vid I grew up under a rock and never knew you could do this stuff with a balisong foud these vids today taped the blade on my knife and mastered every one TODAY!! (exept the 2yk) (even with the blade taped my cheap balisong has sharp edges where ever my hand is not cut is is brused OW! going to take days to recover from this, it looks like I was in a fight with only my right hand) lol

[HiTmAn0104]

can you please explain how to do that part at 8:07 more. ive watched it like 10 times and i still dont get it.

[iwoenailord]

Why would you ever tape the blade? Cutting yourself is half the fun of playing with a weapon :D

[BoCax7]

doing these tricks is hard..i have an all black butter knife nd i already cut my self=X

[DAFTnerd]

dont you hate it when people say rate,comment,subscribe...rate,­comment, and sudscribe

[bladeslayer1225]

Is that a Benchmade model 42 I spy? Where can I get one? Benchmade discontinued it.

[jayman6200]

does one of the sides have a complete flat edge so you don't get cut?

[razldazle10]

Where did you buy that knife? Its fuckin amazing!

[with0utskill]

I'll give $300 for that knife, if you're willing to sell it

[mrneumann5000]

@with0utskill Sorry man, I love it too much.

[tolkajean]

@mrneumann5000 ummm i got mine for 15 a few months ago and its still working like a champ

[AugustBurnt]

@tolkajean then its not a BM42

[adam11151]

@with0utskill Dude just order one from knifezilla or something. They only cost $200.

[with0utskill]

@adam11151 benchmade model 42's?

I thought they discontinued them.

[davidoken]

you tell me about the tape right after i cut myself like 50 times!!!!

[AvengingBus]

thanks for this vid i got it on the 5th try and im currently making a video showing me do it.

[Clutchisback1]

landed it first try...lol...it was ugly...but i did it...lol...yes i want a cookie...

[choafan23]

were did u get bali songs and whats the price range?

[choafan23]

were did u get bali songs and whats the price range?

[RAWRxBlueDino1028]

7 beginners cut themselves trying the y2k

[Flakked]

Like if you came here to practice looking like the Spy...

[Deathsmind21]

Where do I get the knife he has in the video? The bk I have is a POS and is hard to work with.

[awdiwdwf]

@Deathsmind21 He's using a Benchmade Model 42. There's no good place to buy them at the moment- it's a discontinued knife. If you're set on getting one, look for used ones on knife forums and be ready to spend somewhere around $200.

[Deathsmind21]

@awdiwdwf Alrighty thanks for the info. Is there any other brand that's like the 42 or am i just SOL?

[awdiwdwf]

@Deathsmind21 Benchmade has three other balisongs that are still in production. Buying new, these range from $150 (Model 53) to $220 (Model 52). These are all very good quality knives. For something in a lower price range, the Bradley Kimura II is definitely worth a look. At $80, the materials aren't as good, but the manufacturing is still top notch, and it will feel MUCH nicer than any cheapo.

[NitePr0wler]

i got the y2k first try, a little sketchy but i got it

[morbidminister666]

i can do all the beginner tricks...what trick do u suggest i go for next?

[mrneumann5000]

@morbidminister666 Check out the rest of my tutorials as well as Cutlerylover and Azteckia tutorials.

[morbidminister666]

i can do pretty much everything in both ur beginner videos...what trick u suggest i go for next?

[arthurdragon17]

i really love your balisong videos, i think your the best at this on youtube;D

the tutorials i mean, i dont know hwos the best at doing tricks with the bk...

anyway, thanks:D

[HunterXpert]

just get a training knife if you dont want to cut or stap yourself

[Perniciousfats]

this guy is a great teacher

[Davidsuh12343]

how much are these knifes?

[THEPRO1238]

do you know how to do the eight ball im learning it now but im a left handder T.T

[ConquerFreak5]

i have just bought a balisong practice knife from ebay 3-10 days shipping im learning alot before i get one for the FIRST time!!!! btw is ebay safe and i live in apartments so is the ups guy coming need to know all info lol! TY FOR ANSWERS

[w3r0zelandes]

no offence man but u suck at teaching u should just do the tricks

[BUTTERFLYKNlFE]

this is one of the easiest tricks for me

[SPIKEwillKILL]

Hea make some more videos but with advanced and intermediate tricks

[mrneumann5000]

@SPIKEwillKILL Have you seen all of mine?

[with0utskill]

can you make an intermediate or advanced balisong tutorial?

I know all the tricks in these videos now, and want to learn more.

[mrneumann5000]

@with0utskill Sure man, check out my other videos.

[2012isntgonnahappen]

YES!!

I got's the Y2k!!

=D

[with0utskill]

@2012isntgonnahappen me too! :D

I still drop it, but I got it.

[xXxHiTBoyxXx]

yea i got the y2k real quick

[rotoman2002]

were do you get it and how much

[paintBALLkid2822]

if you use duct tape use "goof off" gets rid of everything on any surface

[cascasoldier]

Benchmade model 42s normally go for 280$

[rotoman2002]

how much is it... i kinda want one

[Y0utube5ucks]

I just got a butterfly, and My hands look like fellets :P

[kakshi12123]

whens part 3????

[Freelance044]

The spy's trick is the same but tilted and it doesn't release from the hand completely. I got the Y2K down in 5 minutes cause of the Spy's trick I learned beforehand lol. Y2K is easier btw.

[thegreatralphino]

have you ever actually cut someone with your knife



[zinkx3]

wow i got it less then 20 mins dude ur like the best balisong teacher lol it made a whole threw my bed the first time i tried it

[bustedbythebusters]

make apart 3

[drpinto28]

is your knife sharp and also is the butterfly knife illegal in Indiana and also im lookin for a very cheap one i want a black one thats under 15 dollars whats a good website

[braydenanthony26]

@fromdirttodustpro1 real men dont even go to the hospital ... wth

[isswarrior]

WANNA SELL THE BM 42

[mrneumann5000]

@isswarrior Possibly. For the right price.

[danlee5047]

@mrneumann5000 for how much?

[mrneumann5000]

@danlee5047 Name a price and Ill tell ya if its right.

[travis79780]

@mrneumann5000 ill give u $120

[mrneumann5000]

@travis79780 No thanks, its worth alot more.

[travis79780]

@mrneumann5000 what about $200 thats a reasonable price

[mrneumann5000]

@travis79780 Right now, no its not.

[travis79780]

@mrneumann5000 well i tried.

[with0utskill]

@mrneumann5000 how about $300?

[Mynameisnottrevor]

@travis79780 lol you cant even buy that knife any more right now from any site and even if they were in stock they are $280. + There is a huge demand

[isswarrior]

@isswarrior an what is that

[fromdirttodustpro1]

9:08 fuck taping the blade. Real men dont care if they get cut. They are also visit the hospital alot more.

[Jesswold]

how long did it take you to learn all that stuff and like get really good at it?

[mrneumann5000]

@Jesswold Around 3 years when I made that video

[dhstandard22]

I think a better way instead of taping it is to get one of those 15 dollar dull knives...they work pretty well for practicing

[13expose13]

thanks. your tutorials are real easy to follow.

[moonkinpwnyou]

cant wait to do the y2k rollover over my ex-girlfriend,(first time doing it)

[moonkinpwnyou]

6:22 looks really wrong if u know what i mean

[Naturepheonix]

@moonkinpwnyou I think it's only you dude ;D

[glgbd]

To be honest, I have come across harder tricks than the y2k. This trick took me about 5 minutes to learn and I'm still mastering it. It's super fun though.

[hifatpeople]

i did the y2k on about my 5-7th try =) failed right after though

[gingarandlucky]

thankk you thank you thank you thank you! this was really awsome and very help ful! the last one took me 2 hours to get though :(

[Linksonic5]

Got it on the first try! =D

[leadheadsrock]

thanks for the vids im new to balisong and they really helped me learn some tricks. post some more please

[leadheadsrock]

thanks for the videos they really helped me out to learn some tricks post some more please

[TheBradfool]

when its parallel to the ground its the Red Spy trick/thumb roolover

[Chonghan93]

I am very interested in getting a Benchmade Model 42, but can't find it anywhere, can you help me please!

[mrneumann5000]

@Chonghan93 try balisongforums

[p0olplayer]

good video, the y2k is easier at an angle im beginner to actually doing trickes with them and i tried the y2k at a 90 degree and couldnt do it then tried it once at like 45 and it was much easier

[babymario]

ahrm... Gentlemen

[stephencrf80]

what kind of knife is tht can u give me a link i want it

[mrneumann5000]

@stephencrf80 Its a benchmade model 42, discontinued

[stephencrf80]

@mrneumann5000 those are so dam expensive know anywhere i could get one cheap ive been looking online for a while

[zomgblah1]

@mrneumann5000 how dop u get them then?

[mrneumann5000]

@stephencrf80 PM me, I may be able to hook u up.

[amsyar2000]

@stephencrf80 yo...it's benchmade model 42...pretty expensive

[Rufio389]

need a better camera angle dude..

[mellisco]

why is it that i can do the y2k but not the windmill through fingers.....

[kliao93]

hey, i want to get started but was wondering what are good blade and handle dimensions? If you have any links or suggestions (btw, im canadian so a lot of sites dont ship to me) lemme noe (ex: models)

! thank you

[hackydude93]

Oh I see you thought of electric tape as well...

Now I feel stupid about my comment on your first video lol.

[slesta]

Okay here's an advice to you all: Don't try the Y2K with a knife that's not entirely smooth. It will kill your hand.

[JFAC4LIFE]

I stabed my bed :( ....on like my 3rd try

[DrLeviticus]

I didn't drop it, but it did slash my pinky, I need stitches, I sharpen my knife :(

[crazedpawner1]

@DrLeviticus Wait, you said "i need stitches" like, are you bleeding right now, but still had time to comment on Youtube!?

[Marshmallo117]

you were right of the y2k. i did drop it on t he first time

[Marshmallo117]

cool i learned