How to set Mini 3ch Heli for Stable Flight

[KevinMillard68]

sorry kid your way off on this.how far the screws are turnned in has nothing to do with the balance of the bar, its the same weight on each end..

[jthornley12]

@KevinMillard68 Please refer to your user manual and you'll see that I'm entirely correct.

[KevinMillard68]

@jthornley12 your manule is a mis print these balance bars are no adjusable, they are facrtoy preset.i have the same one and i can tell you that according to all the laws of the universe here, how these ones are made thy have equal weight on each side so adjusting the scew in or out makes no difference, to try and move the weights out ward you cant due to the location of the locking screws,cheap rc toys like these are not able to be adjusted as you sudjest

[wolfe1970]

@jthornley12 i have to agree with Kevin, turning those screws wont change the weight of your balance bar, no mater how far in or out the screws are the bar will weigh the same, the way for stable flight it to tape one blade, spin the heli up, you can then check to see if your blades are running parallel (look in line with the blades), if not then you need to adjust the link to swash plate, not the stabiliser bar

[jthornley12]

@wolfe1970 It's not meant to change the weight :) taken from the manual now though, Adjusting these screws affect the Cyclic movement of the Helicopter. Removing or adjusting these screws can help reduce the Vibration of the balance bar (therefore setting it for stable flight) n finally adjusting these helps create a better gyroscopic effect.

[andresdavidperezb]

hi buddy

I've been watching your videos on you tube about some problems with the rc helicopters and I learnt a lot.

but I cant find info about the rc helicopters, I think that my rc helicopters (it is seems like yours)has a problem whit its battery, after the charging time

the power from the helicopter is too low...so do you know something about it?

thanks for your time buddy...

[jthornley12]

@andresdavidperezb The battery wears out over time. You can replace them cheap, but have to fit them yourself. I'd recommend you replace the heli mate

[KevinMillard68]

@andresdavidperezb are you charging form the remote or the usb adapter??? charging form the remote you need to have good quaility batteries and you only get about 10 charges then you have to replace the batterys in the remote, i use only the usb chargers and they work better either way and this way not replaceing remote batteries as often either..

[wolfe1970]

@andresdavidperezb you dont need to replace your heli, theres nothing wrong with it, over time the LiPos loose there charge capacity, specially if there single cell, buying a new battery will resolve your problem. always keep them charged will extend the life of your LiPos

[WasDoLos]

mine keeps spinning. what do I do? mine is a gyroscope helicopter

[jthornley12]

@WasDoLos buy another one mate. they are not worth repairs :D

[RYANJCLOKE]

@WasDoLos

Dont buy a new one you have to trim it with a button

[theawesomebige1]

i have the model with the gyro but the top roter wont spin, can you help?

[jthornley12]

@theawesomebige1 perhaps gear has stripped

[puggster]

@theawesomebige1

the shaft that goes into the top rotor has striped inside, its enough to hold it on but under power it will not spin or spin slower, second issue is the the motor is burned out, check both motors are spinning and the little gears are moving, a striped main gear may cause it to stop also, if its simply the shaft which has stripped then take it off and apply a little ca, or super glue to the tip of the metal part then press the rotor system back on

[cubparkour]

it is not a balance bar it is a flybar

[jthornley12]

@cubparkour A Flybar balances the helicopter, so you can call it either

[9DragonMaster]

cool thanks, im currently working on a rc heli that looks just like that one but it spins in circles and the trim can correct it but I can only fly in huge circles at night outside over the grass. It's motors are strong it flys up fast so I'm doing what I can to make it stop spinning so much. My version is the Speed Tech DH-1 with colorful rockets on it, but the huge gears looks like yours. I also have the syma s107, which I love and am considering a tail motor swap... check my channel soon

[dylantrials]

this is a gyro master right?? if it is have u ever had trouble taking off mine wont take of somethimes :P

[supercar1999]

can i add a gyro to my 3 ch heli

[jthornley12]

@supercar1999 no, not worth it

[SprayerxOx]

Yeah, i got one... and the price is not bad, but now i bought a fully 3d mini heli (walkera 4g3) for 90 bugs... that is a REAL helicopter which i mean ....

[jthornley12]

@SprayerxOx Yep these are toys :) You don't learn anything on a 3ch heli, just indoor fun thats all :D

[SprayerxOx]

this is crap... buy a REAL RC Helicopter and nothing for around 20 bugs xD

[jthornley12]

@SprayerxOx Do you have one? I would say its a great heli for the price and for indoor flying. Much stabler than large ones.

[jthornley12]

@gab32816 Do I now? :) lol

[predetor441]

Hey I got one just like that but the gyro is on top and u don't need to adjust it so it's a bit easier to tune it it's the same size too add it handles slot better too I had one just like ur so look in to it

[jthornley12]

@predetor441 well you don't Need to adjust this one :) Just sometimes it needs it when things come loose :)

[secretlol100]

Great! :D Now I know why mine flys like a cheap thing from argos...

[jthornley12]

lol- These things are good when set right, and crap when not heehhe

[jthornley12]

nah dont go for cheap- get this one or the one with GYRO :) both are good