How To Make a Rapid Fire Controller for Xbox 360 (also my MLG style controller video part 1 of 4)

[GModzTuts]

@MrCameron1008 As I stated before, please refer to the link in my description to tell if it is moddable. I cannot tell by the printed numbers on the board without visual confirmation.

[MrCameron1008]

Is a tp2 modible

[GModzTuts]

@silence1killu100 My Gamertag is Ally Adrenaline

[GModzTuts]

Ally Adrenaline

[GModzTuts]

@silence1killu100 I'm Ally Adtenaline

[GModzTuts]

@silence1killu100 It runs from the led to the trigger to the button to the trigger. And check the link in my description to see if you have the correct circuitboard revision. Also, this mod isn't too fast. And the less charged your batteries are the slower it is.

[GModzTuts]

@silence1killu100 Check your circuitboard revision in the link in my description

[GModzTuts]

@MrDuderox123 Check your circuitboard revision with the link I posted in the description

[EpicBeeFHD]

@GModsTuts ok so what exactly are the games that this still works on? arnt modern warfare 2 and 3 now patched for this type of rapid fire mod?

[silence1killu100]

What's ur gamer tags I'm silence1killu12

[silence1killu100]

Myn is already nodded but my trigger finger is faster so does tp38 work?????

[silence1killu100]

Dose tp38 work

[TheLaxzilla123]

Hey Guys check out one of my vids on my channel. Its called " How to be a Loser".

[GModzTuts]

@ballerboy315 I use 18 ga. Solid core wire. And I get all my buttons from radioshack. Or I pull tactile buttons out if old stereos and electronics.

[GModzTuts]

@geowhitesniper Cool

[GModzTuts]

@ballerboy315 What it is is 18 ga. Solid core wire. If you have an old computer that's trash you can take the White or grey cables (about 3" wide) inside it, cut the ends off, peel all the wires apart into individuals, and use that. And I get all of my buttons from either radio shack or I pull tactile buttons out of old stereos and electronics. Thanks for viewing! -Gianni @GModz

[ballerboy315]

So that is just solder wire? Where did you get the button?

[geowhitesniper]

gay

[pooh3700]

Okay so what if you want it to be permanent can you just hook the ends of the wires together and leave it like that?

[nraughmoobvwj]

lol

[nraughmoobvwj]

for those who dont sound gay i wanna see you make a video that as good as this othetwise just watch the vudeo or shut the fuck up and go stick your middle finger up your ass.

[Elderspatan]

I'm not the creater of this video but you can replace it

[GModzTuts]

@Elderspatan What? haha

[familyguyrocks1233]

What do you do if u burnt the led like I did lol

[GModzTuts]

@familyguyrocks1233 if you still have the Copper/ Silver Trace exposed then just solder to that. I have done that before too,it makes the mod a little more dificult haha

[familyguyrocks1233]

@GModzTuts lol

[xtheflavio]

i am the 5000 :D

[GModzTuts]

@xtheflavio Yes you are haha

[MrDuderox123]

@GModzTuts Does TP26 work

[Graystripe42]

I have the teistable d pad one two:p

[GModzTuts]

@Graystripe42 hahah the transforming D pad controllers feel more comfortable, the finish if them I mean. And I feel like my hands dont sweat as much from gaming for a while haha. And, the Dpad is mor accurate for Arcade games and Hitting it quick online and on campaign haha. i remember I would go to hit the noob toobs on Campaign on Cod 4 and It would put my night vision goggles on too haha. it doesnt do that with thyis one haha

[GModzTuts]

I have no clue Without looking at it, Check the link in my description to see if it is, and it will tell you for sure if it is

[TheOtherMadHater]

@GmodzTuts my controller says Tp26 is it mod able

[verefiedxL]

u sound really funny

[GModzTuts]

@verefiedxL Cool.

[GModzTuts]

@BABYSNIPERKILLER The ones you cannot mod without either a mod chip suck as IntensaFIRE, or without a complicated soldering process using a resistor and a 555 timer, are the CG and CG2 AKA slim Boards. Thanks!

[GModzTuts]

@BABYSNIPERKILLER I actually saw your Video a few months back, And that is part of what helped inspire my channel. The mod you are performing on that controller is for a TP3, Yes, So is this one though haha. The controller in your video, And in mine are both called "Matrix Rapid Fire mods" or Push Button Rapid Fire Mods". Both my video and yours are the same type of controlller haha.

[Charliebrownhot]

And the part 2 3 and 4???

[GModzTuts]

@xXMrBossManXx Hi, when I made this video i wasnt thinking about what i was saying there. If you look at my Description, there is a link to a site "Llamma.com" and it will show you how to tell which controller you have. after you have looked it oveer and decided which type of controller you have via the site, and if it turns out to be a MATRIX controller, then this video will show you how to mod it. If it comes out as CG. CG1 (AKA "Slim") then this video is of no use to you. Thanks!

[montville96]

what soldering iron do u use

[GModzTuts]

@montville96 Personally I use either a Radioshack fine tipped electric soldering Iron, or a bernzomatic Butane fine tipped soldering iron. You can see it in one of my new videos, and I think in my JTag videos too.

[soyown]

You sound gay

[GModzTuts]

@soyown Cool? Atleast i have a Maturity level and IQ level high enough to not bite the hand that feeds me.

[dgenerationxman]

@soyown Whats wrong with gay people? What u said shouldnt offend anyone u stupid lil shit

[chubbiesttuba]

BULLSHIT u can mod any controller as long as you have a resistor.

[GModzTuts]

@chubbiesttuba ok first off bro, You need to hop off my nuts because you clearly have NO idea what you are talking about. You need NO resistor for any HomeBrew controller mod.

2nd. I cant believe your talking shit to a seasoned veteran. Quit thinking you know everything when Guaranteed I have been doing this longer and have done way more mods than you can even name, or have even seen.

[Snowboardin208]

Can u mod my controller plz message me back all I want is the mod tho

[GModzTuts]

@ellogov10 it sounds to me like you id this on a CG board.. If its not a matrix board it will only fire once, or it wont even fire at all.

[ellogov10]

i did this but when i hit my button it fires only once

[GModzTuts]

@ellogov10 it sounds to me like you id this on a CG board.. If its not a matrix board it will only fire once, or it wont even fire at all.

[mw2m0ds2718]

what tools do you need to open up your controller?

[GModzTuts]

@mw2m0ds2718 Torx t8 or t9 Screw driver with atleast a 1-1 1/2"long neck. Thats all you need haha

[Megadoug1320]

you are dumb lol both of the controllers can be modified... I have a red stealth mod and is one of the newest controllers out

haha get with the program!!!

[GModzTuts]

@Megadoug1320

Your really going to pull this? This is for the BUTTON mod. you cannot do the button mod to newer style controllers such as most reach controllers, or the gears 3 controllers, or the Limited Ed. Silver controllers. yes, stealth mods are able to be done, but not THIS mod.

[GModzTuts]

@Megadoug1320 Please, read the details or LISTEN before trying to prove me wrong. im a respected modder around XBL and locally. I have experimented with the Newer CG controllers and there is NO way for a button mod on them, i have tried EVERYTHING.

[GModzTuts]

@Megadoug1320 I have a newer CG with a stealth mod too, if you watched more of my videos you would know that. Its a silver controller, it was in a black Kinect controller uncill i switched shells. now, for the LAST time, if its MATRIX, (older vboards, rarely in newer controllers) this Button mod will work. if its CG, or CG2 (most common in newer controllers, never in old controllers) this will NOT work. Capiche?

[MaximumPayn3]

I have been using my rapid fire controller for about a year and then out of the blue it stopped working! i dont know if i did something to do it. The wires are fine, the LED is fine but the right trigger doesnt work. The push button only shoots a single bullet but only when the button is released. I think there is something wrong with the right trigger but i dont know what.

If anyone can help me PLEASE message me back!

Peace out!

[JarrefPikar]

@MaximumPayn3 its seems like somthing went wrong... o_O

[MaximumPayn3]

@JarrefPikar YA THINK!

[GModzTuts]

@MaximumPayn3 Just noticed this, yea it sounds like it shorted the PCB where the right trigger goes in. its time for a new controller. That is exactly what this controller did after it got koolaid spilt on it, it would shoot once after you release the button, and the trigger didnt work at all.

[bloodheart675]

nice spelling :)

[GModzTuts]

@bloodheart675 Haha I know right. i was in a hurry.. Fixed now