Scooter Rebuild (w/ SCS Compression System)

[Timmyyyrox3SH]

how do you like the proto scs clamp? I'm looking into getting a SCS and I'm not sure which one to get

[nigelthedrugo]

@Timmyyyrox3SH get a grandade scs by pheniox

[joe4lol]

is that scooter undersized?

[tommy3815]

and could you use HIC with grit threadless fork if you installed a star nut in them ...............? please awnser

[ThePgunner]

@tommy3815 yes, dont forget you need oversized bars and oversized clamp.

[tommy3815]

what forks are they ..... please awnser

[RevertzX]

song?

[Dknb11408671]

@98anoosh no bc u need a star nut , a shim , and oversized bars so no

[Mrnanas]

dude dont put grease on the fork, especially thick grease. use a dryer grease like the speed scream and put a tiny bit on the inside of the proto. because thick grease will allow the fork to move within the scs and that will ruin it even more. and i found out that if you put a mix of thick and dry grease in any kind of bearing it makes it smooth as well as fast....peace.

[98anoosh]

what if u take ultra pro forks sand em down. then can u use proto scs? PLZ ANSWER!

[ThePgunner]

@98anoosh just buy some decent threadless forks, they will last you soooo much longer.

[sammyjohnson6941]

whats that song

[ferrarix20]

is the proto scs worth it?? im thinking of getting one with some smxs

[ThePgunner]

@ferrarix20 depending on where you live, in the uk they sell a cheaper version on SCS called blazer SCS, but if you live elsewhere, buy a Proto scs, but i recommend you get HIC, its alot better, with HIC you need oversized bars by the way...

[kozy562]

Why the hell would u let that dumbass work on your scoot he dosent even know what a (headset) or a compression bolt is

[tomcpfc95]

with the scs compression do you need the long bolt that goes through the forks or do you just need the star nut

[officialboinc]

how do you cut down your scooter forks?

[techno123curling]

what is the name of this song?

[GODvsAbc]

hey would this work i de-threaded (grinded downed) my ultra pro forks and i got a gold knuckle and buff bars without a slit :o

[Jammiker]

a do proto clamp make your bars taller

[streetridazkrew209]

wats the name of the song?? i like it:D

[LeTHaLxShOcK]

hey if u have a firs pp sealed heaadset does threaded forks fit on that and how do u work it if i put threaded forks on it

[snowboardingman10]

@dragonblade6375 u need it to keep the forks in the headtube and so that the headset is kinda pressed into the headtube and makes the scooter wwwaaayyyy more dialed.

[96Locdog]

nice

[dragonblade6375]

and what is your headset

[dragonblade6375]

what is the reason u need a compression system

[winnythepoo135]

@dragonblade6375 so the forks dont slip on the bar and fall off

[alijustin1]

i ordered proto scs from inward and my is in my scs and i cant get it out. how do you. plz respond

[bripplet]

what does it actually do? plz reply

[MrScoot4evr]

what a shitty garage

[tomsk8s999]

hey will the compression system fit on inwards? im getting some off my friend but i dont know wethr there threadless or not, and will they fit on nitro forks? answer please really fast

[SCooters58]

wats the song called??

[DESTROYxALLxGINGERS]

hahaha thisss kid is a stupid fuckinn faggot look at his head and clothes

[rangdangreubs]

its a shimy you stupid fuck

[martinmanify]

looks like jimmi neutrons back wheel got stuck

[AdamRocks6d9]

we?

[TheLIFEOutdoors50]

buy a goped.

[eaglecore1]

song?

[logan1drake]

@thesooterkid Nujabes - Feather

[cholwitob]

you should get a phoenix deck and phoenix brake and schorcher forks you got scs

[sk8chippovans]

sup mrboy94 , just wondering if you got alu bars e.g park y bars do you need the red shim or will it still work without the shim ? please reply thanks.. (:

[dumassfaceheadbum]

2 things have u been sponsored yet? and p.s. nice scooter!!!!!=)

[AndrewDscooter]

You should cut off the bar flanges, because ut helps with barspins.

[iSaxoLadzz]

could you do this with a MADD gear pro Team edition standard everything??

Plz resond

[HallyTally]

likeing how long it took you to get a back wheel off.. :L

[trevscoots]

what if i have a slit can i cut that part off then will it work ????

[halo091000]

@trevscoots yes

[DirtDude1019]

Don't use a hammer u will wreck stuff

[wickedercleaver]

nice scooter im getting the scs compresion nuckle and compresson set and also my new awsom district forks today does the compression set actualy make a diforence to the scooter

[RSoySauce92]

what headset is that

[noscooterdiving]

how much did it cost all together

[KTM4EVER1234]

shit, what u could do better, errrrm....... loose weight and stop eating u fat shit

[TheArtOfHarry]

@KTM4EVER1234 omg stfu u dumb piece of shit and fucking die just do your bit for the gene pool and just fucking kill your dumb fucking ass

[brandonrox11967]

The camera guy fucking sucks at recording

[XtrmePBnation]

Dude this is the best song ever good choice for the video RIP nujabes

[scootscoot11357]

you should also make a video of how to put the star nut in

[scootscoot11357]

with the compression does it tighten into the star nut inside the forks just wondering cause i just started and i dont realy no how to put the star nut in

[jadporsche959]

can u put an scs on a stock fork?? plzz answer

[mrboy94]

@jadporsche959 no because its threaded and scs is theadless

[23lukeyboi]

@mrboy94 thats wrong u can put a stock fork on an scs u just have to use the locknut below the scs

[obliverationiser]

@mrboy94 unless u have madd gear nitro forks then you can use the SCS, ICS or the HIC :)

[iScoot691]

@mrboy94 yes u can use an scs wit threaded forks cause im using an scs with threaded forks and its just fine..............

[LukasBScoots]

@mrboy94 sure he can 

[gio7840]

@jadporsche959 you actually could u just have to put in the star nut in the stock fork cuase thats what i used to run on my ultra pro

[cole1695]

@jadporsche959 yes but make sure you stretch it so the threads dont catch

[MrLemonPony]

@jadporsche959 scs is a compression for threadless forks, theres no point for it if its threaded because threaded is a compression system dummy

[dupid23]

@jadporsche959 i guess u could but why not just use the locknut it comes with and put it on top of your threadless headset instead of buying a 60 dollar scs kit...

[razorcody1]

@jadporsche959 yer yu just neeed a star nut :D

[skykid109]

@jadporsche959 yah i have a threded fork

just use a star nut

[lclar62]

when u film, film it in the light

[nickscootz]

trying to get sponsored in what?

[mrboy94]

yes

[PKLOLDUDE]

Do You Need A SCS Compression clamp to do this?

[wasup1652]

thank you for this vid i might go with this compresion system thingy now i no how it works.

[TylerrScooters]

Why did you even rebuild it.

[ORANGEWOODFBS]

ill buy ur proto off of you

[ORANGEWOODFBS]

ill give u 60 bucks 4 ur proto

[andrescoots13]

ive got a token sealed headset top and bottom will that matter if i run compression

[mrboy94]

nujabes feather

[BMXBEA5T]

whats the song?

[MegaLeadguitar]

hey ppl, i have threaded forks and bars and stock razor ultra headset, i was wondering if i need all threadless for proto scs, also i have 2 proto sliders that i have to tighten so much that they barely spin beacause my wheels rattle from side to side and my scoot sounds like a freaking tin can, if i have a nut and bolt will it eliminate this from happening? plz reply on this it would be greatly apreciated

[RudyBaga55]

hell yeahh,nujabes is sickkk

[Spagettileggs]

do you need a threadles head set for a threadless fork

[Tsingtao4]

Nice song, very relaxed tutorial, pretty good i'd say, but dont lube everything up. i only lube my headset and bearings. i like the keep everything else clean and dry to prevent any unnecessary moisture, even if i use lube without water.

[mrboy94]

yes you need a threadless fork and headset or it wont work

[milleniumscootteam]

can u just have an scs compression sysem with out any threadless headsets or threadless forks please respond i really need to know

[mrboy94]

nujabes- light as a feather

[Clocketh]

whats the song in the beginning??

[Marshy7771]

shockimg doesnt tell me how to fit the ciompression

[toomuchcoke]

wtf are theese things i see them on like inwardscooters and shit.

sorry for the noob question.

[whyareuonmypage]

3 nooob questions:

-what is a compression set?

-what the hell do they do

[whyareuonmypage]

oh woops. do they help with threadless bars and threaded forks?

[mrboy94]

yes it is much easier to install

[undeadchicken24]

@whyareuonmypage compretion is for threadless froks and headsets, holds ur fork beacuse its not threaded

[danscoots1]

@whyareuonmypage ok what it does is very simple just like threaded forks like what u got now. if u want thi su will need any threadless headset and threadless forks. next u need to install with a quad clamp

[secretscooterfile123]

please please make a video about how to install the headset and install the scs

from scratch

[mrboy94]

ok i will make in about 3 to 5 days from now

[macwanskater]

@33ARSENAL it lets you use threadless forks and a threadless headset and it makes setup really easy

[mrboy94]

it makes it easier and lighter to whip around

[metalmanmitch]

nice and your scooter is soo dialed

[AfroGelXT]

this is good it helped me understand scs is easier than ics compression. one question what kind of lube is the one u but on the fork. axle grease what

[mrboy94]

I put grease, I use bike grease, it works great!