How To Easily Modify A Toy Double Barreled Shotgun (HD)

[ProjectAnnihalation]

I want to remove the springs inside the barrel so the shells don't spring out. Someone send me a tut. Please

[DrScruffy]

@ProjectAnnihalation wrap duct tape around the shells, keep layering it till it causes enough frictionto stop the shell halfway from ejecting.

I recommend RED duct tape to make it loo more like a real shotgun shell (bad ass man) but whatever

[THELAMBOKID2]

i did it works soooooooooo good now!

[JackLondonPcaller]

HAHAHAHAHAHAHH LOOK AT THIS FUCKIN FAGGOT HAHAHAHAHAHH I couldn't stop laughin at this hahahahahahhahahahahahahahaa

[MrWalkerofskies]

good mod. Also, I think its more that those things you called air restrictors cause friction rather then restricting airflow. Same result different reason

[72awesomeman]

i put a lite on my gun and sad it off

[SLOPTOBERFEST]

Lol in real life the longer the barrel,the farther a bullet goes! ^_^ hahahahaha! Dartgun fail!

[ForgeMyLife]

@SLOPTOBERFEST Actually not, the barrel is usually rifled and made longer for accuracy. Friction slows the velocity of the round down. Shorter barrel = longer distance with decreased accuracy.

[500dglasses]

Good idea but it is a waste of money. Why didnt you get a small double barrel instead? It doesnt look as good either but you put time into it so ill give you a thumbs up

[donzai8713]

i dont want to do this stuped thing



[Soccer22Boy]

Cool mine goes far now

[brirhor]

Awesome. I will try the shell restrictors first. Thanks!

[Flakbait888]

it would work with a regular set of pliers

[seriousgamer127]

there so noisy!!!!!!!!1

[munchyminecrafter]

with the shells, only half came out and i cant get the rest out.

[PedoBearJr]

Used... several knifes, wifey won't let me use the nice expensive bread knife..

BUT I GOT IT, now i need sand paper, and Model Spraypaint and some masking tape..Scout cosplay here we go!

[thejoker2f]

my AR in the shell are fucking glued!!!!!

[MrHalomegabloks]

Dude if you paint it like the rangers in mw2 youll have rangers =)

[littlesubby]

dude your messing it up

[WHib96]

With the air resticters gone, can i still use any darts in the gun?

[capoteo96]

Get an airsoft

[legoman4201]

did you paint that gun blue

[heyitsjakers1]

@legoman4201 no he didnt it was the first gen kind of lie the longstrike, soon enough they'll make a yellow one

[link65789367]

whistlers work well in this to it makes it like as strong as the recon

[LuigiMario338]

I had to use a bread knife to saw mine lol fail

[xXXxK1DDSKETCHYxXXx]

cooleo thats wat i thought 2 ur parents r making a bro 4 u and u can show him ur skills

[492716]

I think your parent's upstairs are making a brother for you

[kindal1212]

4:24 (my parents are so noisy up stairs) woah!!!! what were they doing :p

[Cutlerylover1]

i thnk ur one of the few guys on utube i like...good job!!

[airsoftillinois]

squeky table

[davidrocksism]

giggity giggity

[Numbah1Namek]

What i would normally consider a crappy cheap dart gun, i now consider one epically GANGSTA dart shotty!

Dude, u da man :D

[DariusAK]

dude that scarerd me i thaut you were a old friend

[DaJakanator]

Does it take nerf "sniper" darts?

[willaim61]

Hey, would it still work if i just modified the shells?

would that still make the range a bit better??

[zakhanson]

your supposed to cut with a hack saw at fory to forty five degrees makes it easier

[huntingwolf20]

Great tutorial, I only disagree on one thing. Streamline darts are terrible! They are so skinny and flimsy they just don't cut it for me. Although I don't have this Buzzbee shotgun so maybe the streamlines are the only ones that will fit in the shell casing. If the whistler darts or velcro would fit I would probably use those. I think a whole lot of air will escape to the sides of those skinny streamlined darts. Just a suggestion though.

[2008wweman]

Question. i did the thing to the shells but they are a lot crappier without the ar, what exactly went wrong?

[mrmario777]

he he your parents are so loud upstairs lol jk

[nerflongstrikecs6]

i tried stream line darts without modifying it and my gun didnt shoot?

[JWNerf]

Where do you get the blue and yellow one

[0425air]

i did the sawed off part it makes it go 6 feet farther

[blueeyesseto]

two words for you BAND SAW

[xeverus]

i don't think the way you removed the air restrictors actually makes a difference. under the air restrictor is a black ring and under that is a spring. you need to remove both the black ring and spring (which is a pain in the ass) after taking off the air restrictor to actually get a real difference.

[ninjamonkeyfn00]

it easier to take out the air retrictor with a nail through the hole in the bottom

[SupaDude13]

yo dude i did all those mods nd its great, it shoots rele far but only my right barrel is gud, my left one is all weak, do u know wat i can do to fix it?

[Vissan99]

@SupaDude13 the left barrel is a bit weaker than the right one but not too much

[phetdart]

you retard wasted my shell bastard

[LJNERF]

@phetdart you srewed it up then

[lucfel98]

Cool

[lucfel98]

awsome



[DE4715]

hey uhh I made a doscovery if ur gonna mod the 2nd edition shells.

What I did was I took a nail clipper and just clipped the re stricter off.

[PepsiTasteLikeCoke]

WARNING!

WARNING!

DONT SAW IT! IT WILL NOT SHOT STRAIGHT!

TRUST ME!

[Zoeyzo10106]

part of the ar got twisted off and there is still some more of the ar. now it wont fking come out

[Zoeyzo10106]

WTF the air ristricker wont come out

[P3ngu1nhat3r]

I just did the AR Removal and i got 45-49 Ft flat. This is the best mod ever. I just saw some guy use a frigging hammer and nails to get it out. This is more cleaner and efficient. THANK YOU times 1,000,000,000,000!­

[nerf383]

when it is sord off it looks crap

[3089858]

would the gun still work?

[matthew21635]

I'm pretty sure you can put stuff-ons in the shell, it'll make it go EVEN FATHER

[khazoids]

the down side for this is when you saw it off its harder to cock it and load the barrel with one hand

[xenophobe76]

your parents are having sex because they are trying to drown out your bitchy voice

[bigd5000100]

i can make it into an airsoft gun

[bonitaw4]

i did that and my barrel started to fall apart so check that i super glued it

[UncensoredEskimo]

you can do the same thing to the shells just using a hammer and a nail/screwdriver much quicker and easier

[Asian4988]

your parents are noisy bangin eash other lol jk btw nice mod im gona try this.

[iceshards100]

your parents r noisy cause they r haveing sex lol

[firecanon7]

your not actually removing the air restrictor just the thing that holds the dart =/

[whyshouldIbother]

ty ty ty ty ty ty ty ty ty ty ty ty ty ty ty ty ty

[TheCrablegs1]

since you cut off the barrel saw off shell holder (rifle butt)

[Killacats119]

You should take the shell after you remove the air restrictor get a drill and drill through the hole in the bottom thus making more air to the dart

[Killacats119]

The barrel could of had at least 3 centemeters left on it not 0

[oilersfanonly1]

ur a fucking dick stop trying to be cool casue ur not

[WatermelonAlmighty]

Can you can still use the buzzbee darts if you modify the shells?

[Giotheshuffler]

hey dude im going to replace my springs aswell will it work and how do i get them out?

[JumpstyleJordan]

That hacksaw looks to me like a handgun haha

[TheRosanne01]

it looks a lot cleaner if you put the orange cap on the tipp

[gorefestmaster]

@TheRosanne01 i'm going to saw off the barrel this weekend, is there a vid explaining how to remove and place the orange tip?

[TheMarktang]

cool lol

[TheNoobNNerd]

my parents are so noisy upstairs thats what she said XD

[happyshlappy]

dude can you put the air restrict thing back on?

[ericman1000]

streamlines wont shoot out of mine

[jonasldg]

i used a chainsaw no shit

[bobyflip11]

the air restrictor thing there is to

1) keep you from using different darts in the gun

2)to keep the bullet from falling out

but it does take away how far you shoot.

[TerribleThree]

also that buzz bee dart is sping powered not air powered so taking of the pole in the shell out dosent help out all

[TerribleThree]

just to let you know sawing it off makes the dart spin out of control

[ninjamannnn]

@TerribleThree

I can assure you it does not. I wouldn't put it as a step in this video if it didn't help. (I even demonstrated the results at the end if you didn't notice.)

[Unknown8186]

@ninjamannnn you removed the AR wrong .... follow autonerf in how he mod the AR and i don't think something improved at the range you need a bigger place to test it

[BlackMetalMovies]

@TerribleThree No it doesn't, I sawed mine off and it works perfectly fine.

[lolbomb1234]

@TerribleThree buy streamline darts 

[Flakbait888]

@TerribleThree get a deburring tool and de-burr the inside of the ends of the barrels. it'll smooth it out better.

[razer1000]

@TerribleThree I know at least in nerf brand dart guns longer barrels make for less accuracy unless it's a brass barrel which fits stefan darts. My most accurate gun is my firefly which doesn't even have a barrel.

[minimoose1441]

Hahahaha "my parents are so noisy upstairs!" wonder what their doing O.o

[TheReg4ever]

ur shells are in the shot gun

[RammaRITOORITO]

I used a metal file to cut off somethin in my nerf and

[MexicanNerfKid]

You keep saying farther, its further XD

[neonflamingo1]

should i still do this if mine is spray painted?

[GoldendragonOfFate]

It doesn't matter.

[aprules1997]

wow thank u this is like the only modding video that actually helps

[o0ShadowsfeaR0o]

@headache11590

Go get a gun yourself, load the gun, put the barrel in your mouth, and pull that little trigger there. Your the one giving people headaches little queef bag.

[headache11590]

you little faggit...get a real gun, queer ass city boy bitch

[headsh0t98]

you should said sqeeky bird

[SniperBoy211]

the end are banoculars

[kwaky24]

i cant decide if i want to do this

[hattrick116]

@kwaky24 buy 2, do it on one, if u dont like it then you have both

[FatNinjaWalrus]

@kwaky24 buy another one keep one the same saw off the other one

[TheCrablegs1]

@kwaky24 dont saw off the shell holder part of rifle butt

[XDMowjaXP]

Really cool mod

[santosnut101]

this is a useful and good video. good job!

[sawbone222]

best mod on youtube 4 this gun by far! just removing the AR's does enough, about 35 ft avg.

[squidoosh69r]

lol i used a serated knife to saw mine...

[SupremeMonkey118]

thats not a hecsaw

[TigeRevolution]

NERF!

[SawedOffShotgun441]

Thanks really helped ;)

Can anybody teach my how to make it easier to open the chamber?

[gonzaeri000]

i would saw off handle make it look like sawnoffshotgun

[zeldarocs]

A sawn-off shot gun is a shot gun that has the barrel(s) sawn off for more power effitiancy. By handle, do you mean stock? If you do, thats taking off the stock and putting a grip on it. But you can't do that with nerf guns.

[halodude457]

i just moded my shells not sawed off and i got 36 feet

[KelMovies]

Me too... i got 34 feet

[Chavacito32]

I have been looking for this video everywhere! It had both things i was loking for! Great job man!

[bwizm]

dosent it need to catch more speed with the rest of the barel

[ninjamannnn]

Yes, but when you saw the barrel off it leaves plenty of length for the dart to catch speed. The rest past the grip is just crap and slows it down. (Due to the dart rattling through the inside.) I tested it myself and sawed off definately has more range.

[MrBallan]

can u also do the shell mod on the rapid frie riffle?

[ninjamannnn]

If the shells are the same, then I don't see why not.

[ianlolsatyou]

@MrBallan you can also saw off the rfr

[NammyBoys]

you shud do a video on u doing a paint job on it

[NammyBoys]

Nice video 5 stars! hey one question though, taking out those things on the orange shell with those pliers, will it help the gun? like does the range go further?

[UWCcyberwolf]

saw off the stock, it makes it even smaller  and more sawed off. Portable

[crazyfrog1012]

Awesome man. It actually looks kooler that way. 5 STARS

[TheCanadiandollar]

hey koldan its conner,brians friend cool