911 Truth Weaponology Thermite Smoking gun Steel girder

[branni79]

So, the shock from the plane impact blew all the high tack fireproof asbestos lining off every single girder from the top of the building right down to the bottom? Hmmm. And steel girders melted from the top of the building to the bottom even though there was no fire throughout either towers other than the strike areas? Hmm. Fire burns upwards not down, a natural fact. How come steel melted but the entire buildings window glass never? Glass melts at lower heats than steel! INSIDE JOB!!!

[hypercub]

Please watch following video for explanations:

watch?v=ii9KoYNBEx8

There you go! :-)

[cr9527]

1. Thermite cuts DOWN, because of force of GRAVITY. Making it cut Diagonally is like telling an apple to fall sideways.

2. Thermite doesn't cut through anything that Cleanly. It is clear that those are cut by saw, or just a sheer massive impact.

[jspoto]

Oh ok now I will start believing the officials story . 3 buildings can fall straight into their own foot print at ---free fall speed--- even though 2 were hit by planes..... Concrete can turn to dust in mid air even through it should have broken up when it hit the floor. oh yea and planes don't leave wreckage IE PA and the pentagon

[branni79]

@cr9527

Professional demolition charges cut on the diagonal! Why? So when the charge goes off & cuts through the steel etc the top section of the building which has all its weight due to gravity pressing down slides away & down in a concertina effect. If charges cut square & horizontal, the buildings weight on the girders wud simply pop & sit on top of the bottom section and nothing wud be achieved. The weld marks on the angled girder are caused by explosive charge heat. You have no idea.

[branni79]

@cr9527

Watch any pro demolition set up vid on youtube where they fit and discuss the charges and youll see they are set up diagonally and cut diagonally you fuckin idiot.

[FrozenPenguing]

are yous uggesting that the 9/11 towers fell due to a bunch of thermite being put on the girders? how exactly do you suggest the thermite was kept on the girders, and was able to melt the girder at that exact angle. if you have ANY experience with thermite, you would know it burns straight down.....

The only reason it seems to be a warning, or a clue, is the editing. you re-run that line as you show pictures of the girders. he was simply stating what thermite can burn through.

[FrozenPenguing]

he could have easly said it could burn through a car door, or a 10 foot steel wall, which it can, that fact that you found some guy saying thermite can burn through steel girders, does not prove the towers fell because of this. I think this is just one more theory, and one that is clearly not popular...for a reason.

[branni79]

@FrozenPenguing So, the shock from the plane impact blew all the high tack fireproof spray on asbestos off every single girder from the top of the building right down to the bottom? Hmmm. And steel girders melted from the top of the building to the bottom even though there was no fire throughout either towers other than the strike areas? Hmm. Fire burns upwards not down, a natural fact. How come steel melted but the entire buildings window glass never? Glass melts at lower heats than steel!

[jspoto]

The buildings ( 3 of them, only 2 hit by planes) fell straight down at free fall speed. Though it should have crumbled when it hit the ground then concrete and steel building turned to dust in thin air. No plane hit the pentagon. They would have released a clear video if it did. The pentagon is the most secure building on the planet....Wheres the video. The plane over PA was shot down, thats why the wreakage was spread out over 6 miles.

[jspoto]

The only thing i can say for sure is the the official story is a complete lie.

[dlcmuskrat]

@jspoto Or maybe, the wreckage was spread over 6 miles because not a lot of things can stop a giant piece of metal going hundreds of miles an hour.

[canadamonster]

in a video large amounts of smoke come from the base of the towers before they fall. maybe thermite?

[jspoto]

A Steel worker would cut the beam at a 90 degree angle. The reson this would be done is because its less to cut.

[Libtarded]

The reason why they cut on an angle is so they can control where the column falls.