94 Nissan Pathfinder: 30 series Flowmaster prerunner project 4

[Dieselboy350]

Are those custom A arms? I'd like to ditch the torsion bars on my truck and go with coil overs like yours. Not sure how they would work on a 4x4 but the idea is very intriguing.

[DezertRacer7103]

@Dieselboy350 It is possible to do a coilover conversion on a 4wd. Yes they are custom, no one else makes them like this, but we can make them according to your specifications. We would need to have your vehicle present to get a clear picture of what would need to take place. What year/make/model Pathfinder do you have? if you are anywhere in arizona inbox me and I would love to answer any questions or concerns.

[Dieselboy350]

@DezertRacer7103 I don't have a Pathfinder, I have a Hardbody. Same front end suspension. I'm not really looking for travel, more along the lines of lift to clear bigger tires. Right now I have 33's on and it's rubs a little bit but I can't crank the torsion bars up any higher or else I won't be able to get it aligned. Anyways, it's a 1986.5 Nissan Hardbody 4x4 V6.

[DezertRacer7103]

@Dieselboy350 Well there are one of two ways you can go about getting the lift you want. we can build you a custom setup or you can check out Total Chaos fabrication, they got sum sik shyt there to.

[Dieselboy350]

@DezertRacer7103 Well what can you fab up? New angled lower control arms and uppers I'm guessing. New spindle? I want to be able to clear 33's with some flex room. Not worried about the rear lift.

[DezertRacer7103]

@Dieselboy350 Front will require new uppers and lowers yes. We dont make spindles, to in depth. A small body lift would help as well. The spindle on my Pathy is stock and works great.

[DezertRacer7103]

@Dieselboy350 We can fab up sum uppers and lowers to create the lift/travel your looking for, but we would need you vehicle present. You would be very happy with the results.

[MrSirDubstep]

parker az???

[DezertRacer7103]

@MrSirDubstep Yes. Find the I-10 on the Az, cali. border, go north 20 miles along the river. If you found havasu you went to far and proceed to party :)

[MrSirDubstep]

@DezertRacer7103 haha i live down there to!

[MrSirDubstep]

@DezertRacer7103 i have an f150 prerunner

[DezertRacer7103]

@MrSirDubstep what color? You live in parker, you know where our shop is then. 5th and laguna. White shop red trim.

[MrSirDubstep]

@DezertRacer7103 its a red and black f150

[DezertRacer7103]

@MrSirDubstep Only person i kno what that truck is a mexican dude that we did the exhaust on his truck. Named freddy. Whats ur name?

[MrSirDubstep]

@DezertRacer7103 i bought the truck from that guy....what did you think of the whole setup he had?

[DezertRacer7103]

@MrSirDubstep its not a safe truck, he was gonna bring it to us to have work done. it needs completely recaged. He had a good starter truck, but i guess he didnt want to finish it as we told him he needed to. If you would like, we would do the same for you.

[MrSirDubstep]

@DezertRacer7103 yeah im gonna pull all that shit out of there and start fresh...whats your number ill hit you up when i get back there

[DezertRacer7103]

@MrSirDubstep inbox me on here i`ll give it to you

[defia16bars]

Nice, you gave it slightly more travel, and replaced the torsion bars with coils, at the cost of making it 2WD forever. Credit to you for the cool idea and custom fab :) , but it would not be the route i'd take if i wanted something capable offroad.... maybe for the desert???

[DezertRacer7103]

@defia16bars Good thing its not yours then huh...btw man, IT IS A FACTORY 2WD!!!! Your fired, go back to school.

[DezertRacer7103]

@defia16bars It is beyond capible for offroad man, its a desert truck, i live and race in the desert.....maybe you should think before you speak :)

[davidtellez89]

How much for your set up?

[DezertRacer7103]

@davidtellez89 It cost me $4k after all was said and done. But well worth it. You dont want to go to wide, start breakin stuff. I have plans to do the rear end to, Im just trying to improve little nissan factory designs to make a strong everyday driver you can beaton and drive home :) If you would like ifo email me onyoutube and i will give you a contact number.

[UvisionMedia]

Who built those arms and how much travel do you have up front?

[DezertRacer7103]

@UvisionMedia We built them in here at our shop. .120 Wall Tubing and 1/4 in plate. I have about 9-9 1/2 in up front. Once I get the uniballs in the fron and get rid of the factory bushing it`ll have 10 1/2 in.

[DanDanNissanMan]

nice, thats just been body lifted eh??? Check out my vids!

[DezertRacer7103]

@DanDanNissanMan Actually there is no body lift its all suspension.....