I DID IT EXACTLY LIKE HE SAID and the piston just goes right through me! i used creative so maybe that affected it? the thing worked fine all the delays triple checked and redstone and all the pistons are in place, but the thing just goes right through me!
fantastic vid. had troubles with the timings and is still not working though. i am an amuter at minecraft so ive proberly gone wrong somewhere. thanks anyway and upload any more designs if you see them. LIKE THIS VIDEO!!!!
I WASTED 2 HOURS AND THE BACK SIDE OF THE ELEVATOR LIKE INTERCEPTS WITH THE OTHER REDSTONE ON OTHER SIDE. IT DOESNT FUCKING WORK. I WISH HE MADE HIGHER ELEVATOR IN VIDEO SO I COULD SEE.! FUCK YOU
whenever i ride on it i fall off but when i check all the timings are perfect so then i put glass on so i dont fall but then i get stuck in the elevator
This elevator works perfect. Nevermind my last post. Be sure to put the repeaters on the right delays and also check if some of the redstone tracks aren't bound to eachother. Best elevator I've found!
cool but if i use lever or button and im in top floor ? how to get down:D plz create i would really be thanful because i got roleplay server but that elevator rules everything
I figured out the other thing...but When I do it the sticky piston doesn't pull the piston I realized it's because of the second repeater on the back (the one not touching the sticky piston) but without that the piston doesn't open.
I did this but when you tested it out afterwards the redstone stayed on. I don't know if this is because I'm using it in 1.0 or one of the ones near that or if it's just buggy.
This build works perfectly on 1.1 i just made it to go 52 blocks up, you just need to be very carefull when you make the repeaters delay, 1 wrong repeater can screw the entire system.
You could had foretold me how much space this would take.. I thought all was set in that box than you come with damn connections.. now 3 more columns of stone to clean up till the clouds. dammit
can someone PLEASE help. i am tryibg to build this up to the world height but at one point when i wire the redstone, the two sides join together. i cant block it off and i have tried so many things. if someone can help that would be wonderful.
Great elevator I made it then noticed that you can't get down so I tried to make it go down and now it either does nothing or goes completely crazy. THUMBS UP SO THIS CAN BE SEEN.
@RockinOn456 yeah I made a bunch of water flows going down my house after trying 5 different ways of making the elevator go down. But the water flows look really nice anyway
@exgoid88 The video I promised you demonstrating how to hide your wiring and elevator can be found on my channel. I hope you find it useful, if so free to subscribe! And tell your friends about us! Many more tutorials coming, just started this channel, but have several videos in the archives!
I followed this tutorial step by step over the course of 2 days. The mechanics of the lift work great, but anytime someone stands on it, it pushes them out. I put a stone wall up to prevent this, but now you just get stuck between the pistons and stone and have to mine yourself out of it.
@1namster Probably just a timing problem. A sticky piston cant pull an activated piston, so the normal one needs to be de-activated before the sticky one pulls in
@1namster Sticky pistons can only pull the normal piston if the normal pistons not extended. Make sure your normal pistons are losing power before the sticky ones gain power.
@1namster You have to put the repeater of the sticky piston on max delay, and the normal piston has 2 repeaters on 1 tick (default) delay. That will solve your problem.
@1namster Put a repeater set to 4 behind the sticky piston. 2:05 to 2:40 for more help. Watch him setting down the two repeqters behind the sticky piston.
@1namster basically ur sticky pistons are retracting before the normal pistons have retracted ....u needa sort out some of the redstone repeater timings..same thing happened to me...so i got tnt and blew that shit up..so anoying
@1namster could be a timing issue with the repeaters. As far as I know a sticky piston will not pull (or push) a piston when it's extended. You are probably just off by a fraction of a second on the withdrawl. Try turning up the repeaters on the withdrawing part.
i wamted to go higher up, but i had trouble with the redstone design on the back of the elevator, i mean just after you got finished with your little elevator then it did not go higher up because the redstone got mixed. Can someone please help me and reply to me? :I
IT WORKS !!! So stop saying it doesnt....
karatekidxj9 5 hours ago
I DID IT EXACTLY LIKE HE SAID and the piston just goes right through me! i used creative so maybe that affected it? the thing worked fine all the delays triple checked and redstone and all the pistons are in place, but the thing just goes right through me!
74koalabear 7 hours ago
it works for all you morons who say it doesn't
2kickflip360 10 hours ago
dont work!!!
Peliukaszz 11 hours ago
even if it did work, it doesnt even go down...
MegaRedsoxman 11 hours ago
you say oops too many time minecraft now will kick your ass with doesnt working elevator *game glitch push off the elevator and you die*
no3ironman11100 17 hours ago
its a nice thing you have they're what do you do if something happens to it'ssssssSSsss
no3ironman11100 17 hours ago
so how do I get down?
AscendingForever 1 day ago
you could go even further and put pistons that pushes you from left to right, but it's going to complicate the redstone circuitery
Meteorotaki 1 day ago
How do you get back down exactly?? ;)
WhistlingTractor 1 day ago
Don't waste your time anymore it won't work trust me
mdog11400 2 days ago
@mdog11400 just built it in 1.1...works just fine. Make sure the first delay repeater, off to the right on his video, is at 3 not 4
VoidConception 1 day ago
Idiots it is patched pistons won't pull other pistons anymore :-P
mdog11400 2 days ago
this is dumb. it doesn't work and im doing exactly the way you say to make it
MrJinxman23 2 days ago
How do you make it go higher?
Beybalder17 2 days ago
You can't go as high as you like because when you connect it up at the back it goes inwards.
bumface97 2 days ago
Nice Vid, I Agree With Crazybrotherb, You need to put a Glass screen so You don't get pushed off.
jakeN3535 2 days ago
is this beta?
MultiMinecraft456 2 days ago
Keep getting pushed off :(
MrAndreFerRed 2 days ago
if you go up too fast it pushes you off, you need a glass screen in front of it and it will keep you on.......
Crazybrotherb 2 days ago
this is awesome already built one and it works perfectly
2kickflip360 2 days ago
it works but it doesnt take me all the way up
taruza7 2 days ago
Didnt work, kept falling off :( Like u
TheRyanSpain 2 days ago
Thank you! It works!
MrTurtle999999999 2 days ago
Not you too :( everyone says "What is up guys" at the begining.. wonder when someone comes up with something more original :o
johancoolin 3 days ago
my pistons wont even turn on :(
izathae 3 days ago
i GET PUSHED OFF!
YoungaHenrik 3 days ago
You say "oops" a lot
Iamisfp 3 days ago 5
fantastic vid. had troubles with the timings and is still not working though. i am an amuter at minecraft so ive proberly gone wrong somewhere. thanks anyway and upload any more designs if you see them. LIKE THIS VIDEO!!!!
BalistiKn00b321 3 days ago
And to get down safely?
jurgen3Xj 3 days ago
@jurgen3Xj Water?
Lessdrugs 3 days ago
It is extremely hard to do this in a server.
5445252 4 days ago
Please make higher tower???? Gee i fucked up on the next steps
adVanceBitch 4 days ago
it does work...but in the server i play it lags...so it doesnt work for me :/
rickless6969 4 days ago
As you can see, in minecraft 1.1 there is a hunger bar, but shown here has NO hunger bar
razzberry605 4 days ago
@razzberry605 You idiot, because he changed title, this works in 1.1 aswell
GameVed 4 days ago
@razzberry605 hey dumb ass he is in creative mode that's why he has no hunger bar
ComputerTips4You 4 days ago
@ComputerTips4You that is incorrect. this video was made in beta 1.7
adamyoshi 4 days ago
Comment removed
MrTurtle999999999 2 days ago
@ComputerTips4You No hes not because in creative mode and in creative mode you don't have hunger bar....
MrTurtle999999999 2 days ago
Doesnt work..
metalbustah 4 days ago
WOOOOORKS ! :D
metalbustah 4 days ago
I WASTED 2 HOURS AND THE BACK SIDE OF THE ELEVATOR LIKE INTERCEPTS WITH THE OTHER REDSTONE ON OTHER SIDE. IT DOESNT FUCKING WORK. I WISH HE MADE HIGHER ELEVATOR IN VIDEO SO I COULD SEE.! FUCK YOU
XPDisease 5 days ago
@XPDisease It works fine if you just do as the man says so shut the fuck up and leave.
99MrRock 5 days ago
@XPDisease If you are that bad at redstone wiring just use RedPower and make insulated cables of different colors.
RandomElderScrollFan 4 days ago
Comment removed
99MrRock 5 days ago
DOESNT! WOOOOORK!!!!!
BlySS93 5 days ago 14
@BlySS93 Umm, yah it does?
MrAndreFerRed 2 days ago
@BlySS93 well, i guess you are a noob with redstone ! :P
ZemperFy 2 days ago
@ZemperFy Well yeah I am ..i dont know i did it exactly the same a few times actually. And it didnt. Maby its a different version.
BlySS93 2 days ago
Comment removed
MrWileno 2 days ago
@BlySS93 you probably did it wrong.
TheMaxi3234 1 day ago
@BlySS93 it does you just have to be smart enough to build it
DamiontheSpawn 23 hours ago
@DamiontheSpawn It worked you asshole, I made a mistake the first time. Not my fault these people voted my comment as top.
BlySS93 19 hours ago
To hide do you just cover it
croctorpen 5 days ago
whenever i ride on it i fall off but when i check all the timings are perfect so then i put glass on so i dont fall but then i get stuck in the elevator
wonderworld32 6 days ago
@wonderworld32 Same here it just kicks me right off!!
KeatonCarlton 5 days ago
@KeatonCarlton Simple.
Build a wall one block away from the piston.
RandomElderScrollFan 4 days ago
300 likes! How Bout 45 hundred
Crackatopia 6 days ago
@SweetMuffe u need to put glass to stop u from falling oh and btw this guy stole this other guys elevator
anishwij 6 days ago
I dont understand..my repeater are the same as yours..but i always fell of..:/
SweetMuffe 6 days ago
Comment removed
ma9nu22 6 days ago
SoloMinecraft Channel R.I.P :(
edvinuliux007 6 days ago
Ethoslab's elevator is better, and smaller.
MikeNepo 1 week ago
why don't you use a t-flipflop and use a otton on the lower level and also on the upper level?
AndreaHu3299 1 week ago
@CNBmincraft has a better one, but yours is easier......
So the title should be "Easiest piston elevator"
RuningMatrix 1 week ago
Sticky Pistons don't pull the pistons WTF HEEEEEELP!!! and can you send me the link of this map?
Miezekatze45 1 week ago
I cant follow you so good but cool!
Miezekatze45 1 week ago
i made this!! i works! i even made a way down :D
whoiscorben 1 week ago
How you go down.
tousmane14 1 week ago
slow down x.x
KJIgravitypwns 1 week ago
This elevator is the worst one EVER! Standing on the middle of it doesn't work at all, I've tried about 30 times, and I only got up ONCE!
exzibited 1 week ago
This disign is awsome! THUMBS UP!
RockyRoad12000 1 week ago
what about down?
ChrisGamingHD 1 week ago
This elevator works perfect. Nevermind my last post. Be sure to put the repeaters on the right delays and also check if some of the redstone tracks aren't bound to eachother. Best elevator I've found!
beatlebattle 1 week ago
Comment removed
beatlebattle 1 week ago
Thank you!
FourFriendsTogether 1 week ago
i just get pushed off the elevator and all the timings are correct
TomFoster1996 1 week ago
@TomFoster1996 the same happens here
Hjortur2000 1 week ago
cool but if i use lever or button and im in top floor ? how to get down:D plz create i would really be thanful because i got roleplay server but that elevator rules everything
SiTnIcKiS 1 week ago
Comment removed
SiTnIcKiS 1 week ago
my minecraft is stuck on peace full so its not easy
xXbghytXx 1 week ago
i wouldve added a T flipflop with two connected buttons on the top/bottom
ShadowGladiator1 1 week ago
Instead of using a lever, use a button. It resets the elevator after you've used it.
mpxdreamz 1 week ago
thanks :) epic!!!™
TheJj1332 1 week ago
I figured out the other thing...but When I do it the sticky piston doesn't pull the piston I realized it's because of the second repeater on the back (the one not touching the sticky piston) but without that the piston doesn't open.
pinecone1999 1 week ago
I did this but when you tested it out afterwards the redstone stayed on. I don't know if this is because I'm using it in 1.0 or one of the ones near that or if it's just buggy.
pinecone1999 1 week ago
Would this work with a button and not a leaver
drifter12345able 1 week ago
This has been flagged as spam show
Subscribe Me i will Subscribe back!
RatzyMC 1 week ago
Omg lie cake!!!
MyDontmesswithme 1 week ago
at a ceratin height the redstone wiring gets screwed up. =P
Beybalder17 1 week ago
This build works perfectly on 1.1 i just made it to go 52 blocks up, you just need to be very carefull when you make the repeaters delay, 1 wrong repeater can screw the entire system.
dracco4heads 1 week ago
thankyou so much i needed that a lot your the best ive seen at tutorials yet
huntersav11 1 week ago
I use only 1 tick at the delay repeaters and it's much faster. You get from bedstone to cloud level in 30 seconds!!!
Thumbs up so he can see! :)
theBankshooter 1 week ago
You could had foretold me how much space this would take.. I thought all was set in that box than you come with damn connections.. now 3 more columns of stone to clean up till the clouds. dammit
Zalamedas 1 week ago
what the heck i did it all right but the back red stone keep on combining with each other HELP
mrpoopnugget123 1 week ago
Hey could u gimme Download Link pls
nokrijo 1 week ago
Looks super :D... I'll try building it later xD
QuakQuak57 1 week ago
This has been flagged as spam show
ANSWER TO The sticky piston pushes the normal piston but it doesn't pull it! Help!.
MAKE THE REDSTONE REPEATER THAT GOES TO THE STICKY PISTON DELAYED TO MAX!
CallfredYT 1 week ago
this didnt work for me :/
rosssom123 1 week ago in playlist Favorite videos
Cool ..... ._.
stupidxfear 1 week ago
What the hell is Super Sorro Mode?
JJAX445 1 week ago
Freakin Awsome man :D
multicoolguy1111 1 week ago
can someone PLEASE help. i am tryibg to build this up to the world height but at one point when i wire the redstone, the two sides join together. i cant block it off and i have tried so many things. if someone can help that would be wonderful.
minecraftminer2012 1 week ago
@minecraftminer2012 maybe try a redstone repeater in its palce so they don't connect.
RockinOn456 1 week ago
Great elevator I made it then noticed that you can't get down so I tried to make it go down and now it either does nothing or goes completely crazy. THUMBS UP SO THIS CAN BE SEEN.
EpicMonkeyDude 1 week ago 11
@EpicMonkeyDude Pool of water and nicely timed jump'll do fine.
RockinOn456 1 week ago
@RockinOn456 yeah I made a bunch of water flows going down my house after trying 5 different ways of making the elevator go down. But the water flows look really nice anyway
EpicMonkeyDude 1 week ago
@EpicMonkeyDude just make a little pond at the bottom of the elevator that you can jump down into ;)
Mrgojgoj 1 week ago in playlist Favorite videos
@EpicMonkeyDude Search CNB minecraft he has a tutorial on how to make this elevator go upp and down
BaddiTheBest 1 week ago
@EpicMonkeyDude use a button?
Allhord 1 week ago
@EpicMonkeyDude You could make it with a button and a descender at the end.
ThePlayallnight 6 days ago
133 people got back of he elevater
DeJBproducties 1 week ago
Is there anyway of hiding redstone so my server cant see?
exgoid88 1 week ago
@exgoid88
its an elevator, make a room for it that blends into your wall. I'll post a video of how I did it. Just give me a couple hours k?
ZenlarkGames 1 week ago
@exgoid88 The video I promised you demonstrating how to hide your wiring and elevator can be found on my channel. I hope you find it useful, if so free to subscribe! And tell your friends about us! Many more tutorials coming, just started this channel, but have several videos in the archives!
ZenlarkGames 1 week ago
I followed this tutorial step by step over the course of 2 days. The mechanics of the lift work great, but anytime someone stands on it, it pushes them out. I put a stone wall up to prevent this, but now you just get stuck between the pistons and stone and have to mine yourself out of it.
WhenIHerpIDerp 1 week ago
definately not the best...
puuLzee 1 week ago
i countet "ups" 39 times
MrGamerjockey 1 week ago
This is more difficult then it looks, I just keep getting pushed of
CoDBeastleh 1 week ago
@CoDBeastleh you are failing with teh repeaters
MRmincraftNERD 1 week ago
the*
MRmincraftNERD 1 week ago
the only thing i dont like is you cant go down please make a follow up
MINECRAFTBOYZ001 1 week ago
The sticky piston pushes the normal piston but it doesn't pull it! Help!
1namster 1 week ago 23
@1namster i had the same problem as you, and the fix is annoying
the elevator only works north/south or east/west (cant remember which one) but all you have to do is rotate the entire thing 90 degrees
utubeshighlites 1 week ago
@1namster Probably just a timing problem. A sticky piston cant pull an activated piston, so the normal one needs to be de-activated before the sticky one pulls in
sporeaddiction 1 week ago
@1namster Sticky pistons cant pull unretracted pistons
PivotOpera 1 week ago
@1namster Notice this IS 1.7.3 or lower? Well, Redstone and Pistons are WAY different than 1.1 today.
123wildlink 1 week ago
@1namster Sticky pistons can only pull the normal piston if the normal pistons not extended. Make sure your normal pistons are losing power before the sticky ones gain power.
calvinmonkey 1 week ago
@1namster learn some redstone and lengthen the delay
AstroCatHD 1 week ago
@1namster You have to put the repeater of the sticky piston on max delay, and the normal piston has 2 repeaters on 1 tick (default) delay. That will solve your problem.
ieditvidsforfun 1 week ago
@1namster you side thing is on the wrong way
choclade 1 week ago
@1namster Put a repeater set to 4 behind the sticky piston. 2:05 to 2:40 for more help. Watch him setting down the two repeqters behind the sticky piston.
LolucarioXL 1 week ago
@1namster Maybe because the piston is on :)
MrGigamania 1 week ago
@1namster basically ur sticky pistons are retracting before the normal pistons have retracted ....u needa sort out some of the redstone repeater timings..same thing happened to me...so i got tnt and blew that shit up..so anoying
Ninjahansla 1 week ago
@1namster you need the block in front of repeaters on the sides it powers the normal one
dannymonge37 1 week ago
@1namster check to see if ur repeaters are timed right
flamingmyass 1 week ago in playlist Favorite videos
@1namster could be a timing issue with the repeaters. As far as I know a sticky piston will not pull (or push) a piston when it's extended. You are probably just off by a fraction of a second on the withdrawl. Try turning up the repeaters on the withdrawing part.
Trademen100 6 days ago
Comment removed
Killerfang78 1 week ago
@thekamil51 you can use a quick drop with water like i got in one of my piston elevator videos
MegaMcgaming 1 week ago
how u meant to get down
thekamil51 1 week ago
@97zacaria you put a pool at bottom to jump into
AWESOMEm8y 2 weeks ago
Thanks I'll tell all my friends! I have made one to the highest point from at bedrock
AWESOMEm8y 2 weeks ago
how do yo get down ?
97zacariah 2 weeks ago
Help please!!! Elevator is working but when i arrive at top it does damage to me, so i always have 1 Heart left why is this shit?
whatsuphelp 2 weeks ago
my sticky pistons aren't retracting my normal pistons. can you help
ThePizzaguy542 2 weeks ago
Hej
albertg558 2 weeks ago
thanks very cool and very useful
nintendoaventure 2 weeks ago
it always pushes me off
mantas2231 2 weeks ago
instead of a switch use a button it still works
dman9099 2 weeks ago
I noticed that these elevators dont work very well on servers
FlipDeCoin 2 weeks ago
RON WESLEY?!?!
immuneDay 2 weeks ago
These types of elevators seem to malfunction on smp servers
Silvershadow414 2 weeks ago
what is the texture pack
xXGAMEANATORXx 2 weeks ago
my sticky piston won't stick to the regular piston and it just stays floating in midair
IHOPTHIS 2 weeks ago
Thanks, worked really well :)
EvanTheUmbreon 2 weeks ago
water.
CIBERMAX007 2 weeks ago
I thought pistons couldn't be extended while being pushed by other pistons?
ellpana 2 weeks ago
Geeting down the elevator the same wat BTW I like this desigh its real cool and easy
be4u8me 2 weeks ago
for some reason one of my pistons gets pushed out and stays there it wont go back in. why?
zestychickenpie 2 weeks ago
@MINECRAFTdotNET i get pushed out, but when i put a wall infront i get trapped in the lift
SuperRoryrocks 2 weeks ago
if you get pushed out, put glass in front, you wont then.
plokmju22 2 weeks ago
what is under the buttom
Tubbe2909 2 weeks ago
Now the problem is how to get down
xXTheBlueBeetleXx 2 weeks ago
I hate buffering and I hate Ads and when my ads buffer now thats just bullshit.
TysonJE1 2 weeks ago
i built one 15 blocks high
9775leo 2 weeks ago in playlist Favorite videos
litrely do it again
9775leo 2 weeks ago
@theBIRDIEgaming hahaha!
norwegiangenius 2 weeks ago
i wamted to go higher up, but i had trouble with the redstone design on the back of the elevator, i mean just after you got finished with your little elevator then it did not go higher up because the redstone got mixed. Can someone please help me and reply to me? :I
norwegiangenius 2 weeks ago
how to go down? lol
Refur2 2 weeks ago
i think u got 300 likes
LikeABoss1029384756 2 weeks ago
thnx man, it's a compact and easy way to make an Elevator thnx man!!
NoMenCity 2 weeks ago
lol ur redstone can go up walls
studios48 2 weeks ago
I build 30blocks high and when i reach level 15, server ban me and ask, "You move too fast!" (hacking!?)......... LOL
PetionC 2 weeks ago
for minecraft 1.1 i had 2 put down 3 reapeters
KarlwithakOK 2 weeks ago
Jag har 60 subscribers och inte ens en video
TheBIRDIEGaming 2 weeks ago