@xafeRak15tanx there are several different methods for installing the LED's. you can buy them premade and those are easy to install. Or you can make you own LED layout with look great but take a little more effort. You should look it up online, there are some nice tutorials for it.
how much would it cost for the silver with the clear side and 1 controller? just curious cause im only 13 so i wouldnt be able to get it... but how much?
@dawgfather20 Hey, after you use the dremel tool to cut a hole in the side of your xbox, how do you get the transparent thing on the inside of the case? I assume you use silicon?
@FreakiestGolf To get the Plexiglas to hold on the inside of the case I use a special 3m Mounting tape. It's a rather expensive double sided tape but it holding up to 45lbs. of weight. Then once its mounted I use heat to fuse the tape to the case. Good Luck
tip: since your mlg xbox is two tone buy red and blue LEDs and add a pulseVU 2x. it will take the red and blue LEDs and alternate them in fading. or it can make them blink.!
Hey i do little mods to my controllers and some faceplateing but these are absolutely nasty i was wonderin how much you charge for this stuff because i would like one like the lime green one at 3:40 except with a window and either white or green LED's in it if you would do that thanks.
can u share?
QxNExciZion 4 months ago
whats this song called
sicosid96 4 months ago
This has been flagged as spam show
Umm do you customize them or we buy them ??
alexistrooper52 6 months ago
u are fucking good
12356789paul 6 months ago
Sorry it has taken me so long to get back, I've been on vacation most of the summer.
If you have any more questions I'm home for the next two weeks. Thanks
dawgfather20 6 months ago
@greg8762baby its still available if you would still like it.
dawgfather20 6 months ago
Comment removed
mustangcarter199 5 months ago
check out my xbox 360 i modded it myself
kaptinkrunkktk 7 months ago
I HAVE QUEATON I PAINTED MY XBOX 360 NEON GREEN AND PINK LAYOUTS BUT I WANT TO NOW HOW DO U PUT IN LIKE GREEN LIGHTS IN THE XBOX
?????
xafeRak15tanx 7 months ago
@xafeRak15tanx there are several different methods for installing the LED's. you can buy them premade and those are easy to install. Or you can make you own LED layout with look great but take a little more effort. You should look it up online, there are some nice tutorials for it.
dawgfather20 6 months ago
@dawgfather20
can u make one????
xafeRak15tanx 4 months ago
ill buy the mlg AND purple xbox for 700.00 but only if u still have em
demonfat45 7 months ago
@demonfat45 say look at my xbox i can modd for you!
kaptinkrunkktk 7 months ago
@demonfat45 They are still available if you would like them!
dawgfather20 6 months ago
are u rich? lots of xboxes
myunicornisblue 7 months ago
do you do game art? example: left 4 dead, farcry etc ..
chickenoncheese 8 months ago
@chickenoncheese yes I do!
dawgfather20 6 months ago
@dawgfather20 okey, can you do a farcry one for me??
chickenoncheese 6 months ago
I KNOW THE PIECES FIT, BECAUSE I PUT IT BACK TOGETHER RIGHT.
Tool <3
TPOBWMTYT 9 months ago
If you made a red, green and silver Xbox 360 with a black tinted window around the XBOX 360 logo, I would pay up to $350 brand new.
JustSayin24 10 months ago
dat mlg xbox is sick
Skegeebaby2008 10 months ago
how much would it cost for the silver with the clear side and 1 controller? just curious cause im only 13 so i wouldnt be able to get it... but how much?
gabs1021 11 months ago
How much for the blue and black striped one at 0:45?
Colbs378 11 months ago
/watch?v=UeKmIx8rcuU
BETTER
spudsrob 1 year ago
im a get at one day whats your number
tecvawn 1 year ago
how mouch for the blue at 0:47??
wolfram125 1 year ago
how much foor th mlg one
and witch of those cost the cheapest
MrLegeend 1 year ago
how much for the lime green one
fat13oi 1 year ago
@fat13oi $350 brand new
dawgfather20 1 year ago
@dawgfather20 Hey, after you use the dremel tool to cut a hole in the side of your xbox, how do you get the transparent thing on the inside of the case? I assume you use silicon?
FreakiestGolf 1 year ago
@FreakiestGolf To get the Plexiglas to hold on the inside of the case I use a special 3m Mounting tape. It's a rather expensive double sided tape but it holding up to 45lbs. of weight. Then once its mounted I use heat to fuse the tape to the case. Good Luck
dawgfather20 1 year ago
these are orgasmic...
fxqr099 1 year ago
excellent song ~_~
draconer777 1 year ago
the mlg box is beast
Xpub1lc3n3myX 1 year ago
damn these look good
b1gj4ck4tt4ck 1 year ago
You should install some LEDS =)
JO3L101 1 year ago
how much r they
michael97971 1 year ago
is the mlg xbox for sale
LoCoGaming22 1 year ago
where do you get the metalic spray paint that works on plastic from?
skr101274 1 year ago
ok how many xbox360 do you have
hammy12233 1 year ago
You shall give me your NC one.
CriticalGamingCG 1 year ago
man i love that baby blue one
huntjust 1 year ago
schism bitch!!!!!
Meestarcheez 1 year ago
I've heard this song before, what is it?
PeteandMas 1 year ago
do they work
TheSeahawk9 1 year ago
TOOL!!!!! THERE BEST SONG! TOO BAD GUTAIR HERO RUINDED IT!!!!
ChamberlainExtra 1 year ago
any for sale??
CCJSwitch 1 year ago
i would just like a faceplate with a custom paint and glass job
themityslimjim 1 year ago
schism
randombyday 1 year ago
tip: since your mlg xbox is two tone buy red and blue LEDs and add a pulseVU 2x. it will take the red and blue LEDs and alternate them in fading. or it can make them blink.!
warrior122008 1 year ago
whats the point in putting those windows their??
smoshroxnigahigasux 1 year ago
MLG one is the best...
Ryan420VG 1 year ago
how many xbox 360 do u have. the green is awsome XD
othapark 1 year ago
These are nice, I'm flashing this benq I bought off my friend, buying a case which changes colours and added some LEDs to ring of light.
GODLYELLiiOT 1 year ago
love em!
Jayrulz101 1 year ago
how many xboxes have got
technodj13 1 year ago
Hey i do little mods to my controllers and some faceplateing but these are absolutely nasty i was wonderin how much you charge for this stuff because i would like one like the lime green one at 3:40 except with a window and either white or green LED's in it if you would do that thanks.
GrenadeImpaired 1 year ago
love this song
9winters5 2 years ago
SCHISM!
rockingdb 2 years ago
pinche presumido!!!!
podroooooooooooooooo 2 years ago
Hey man what do you use to cut out your windows?
NJCK1N9FJ75 2 years ago
they were in the house when we bought it.
LAWhiteFence 2 years ago
Dremel tool
dawgfather20 2 years ago
@dawgfather20 what du use for the window material its self glass or plexy?
benpie12 1 year ago
@dawgfather20 i was wondering something i cut my xbox case but how do u get the lines straight and smooth after
SmileXForXDaXScope 6 months ago
Why don't you paint the doors on faceplates?
IRapeXBL 2 years ago
i hate when people put a clear skin to their xbox it looks ugly
HKS370Z 2 years ago 8
nice work ! i like the green one ! one day i will do the same one ! !:-)
bgames42 2 years ago 7
u do great work!..way better than the companys
LILWITEBOY95 2 years ago
wow ur xbox stuff is way sicker than the stuff i made
cheesehead111112 2 years ago
What kind of paint do you use?
wyattbarlage 2 years ago
Depends, most of the time I use Kustom shop, Auto-Air and Duplicolor. Sometimes I use Createx if they have a certain color I'm looking for.
dawgfather20 2 years ago
I buy them. Paint and Mod them and then resell them.
dawgfather20 2 years ago
nice work dude where do you get them all
jose4658able 2 years ago