Actually, opening up one side and spraying silicone into just that area will make your cube a chunky piece of shit. The real way to do it is to disassemble the whole thing, and spray all the pieces, including the core evenly with about 3-4 coats of silicone spray. Sanding it beforehand wouldn't kill you either. The main thing you can do to loosen it up is to just be aggressive with it. I've dropped mine a bunch and it's looser than a brand new one, so it must help =D
Spraying it inside like that only makes it chunky if you don't work it enough immediately afterwards.
There are solvents in most silicone lubes which will soften the plastic. You need to spread them around so they can evaporate quickly, and keep working the cube until they mostly harden so the pieces can't stick together.
Pulling it apart avoids that problem, but it also makes it more likely you're going to get it on the sides of the cubes, and end up with a slimy cube with loose stickers
@rushyrulz hahaha right after i was done reading this i threw my rubiks cube on the ground about 10 times as hard as i could, works like a charm now!! thnx!
this vid is good but for all the viewers if you don't have silicon spray, vaseline works great too...;.i've never used silicon spray personaly but vaseline works really well and, it's odorles and doesn't dry out hope it works!! :)
If you read up on rubiks cubing most forums say that vaseline is a horrible alternative. It erodes the plastic and destroys the cube. DO NOT use vaseline on your cube! The only thing worse than vaseline is WD40! Also, I read in many sections that putting sand in your cube is a bad idea as well. Perhaps the problem is people are not putting exact amounts on their tutorials and first timers end up putting too much sand.... lol
Resident Evil BGM
moharris2 5 months ago
i like the music... where can i get that
mreedy02 1 year ago
Actually, opening up one side and spraying silicone into just that area will make your cube a chunky piece of shit. The real way to do it is to disassemble the whole thing, and spray all the pieces, including the core evenly with about 3-4 coats of silicone spray. Sanding it beforehand wouldn't kill you either. The main thing you can do to loosen it up is to just be aggressive with it. I've dropped mine a bunch and it's looser than a brand new one, so it must help =D
rushyrulz 2 years ago
Spraying it inside like that only makes it chunky if you don't work it enough immediately afterwards.
There are solvents in most silicone lubes which will soften the plastic. You need to spread them around so they can evaporate quickly, and keep working the cube until they mostly harden so the pieces can't stick together.
Pulling it apart avoids that problem, but it also makes it more likely you're going to get it on the sides of the cubes, and end up with a slimy cube with loose stickers
nwimpney 2 years ago
@rushyrulz hahaha right after i was done reading this i threw my rubiks cube on the ground about 10 times as hard as i could, works like a charm now!! thnx!
theXBOXhelpline 1 year ago
oh lol too late then because i already put vaseline on my cube lol
jadielj93 2 years ago
How to lube a Rubiks Cube:
1. Mix a few drops of WATER-BASED HAIR GEL & WATER together.
2. Destroy your Rubiks Cube. (Plug out ALL the parts and only leave the middle pieces and core.)
3. Put your Rubiks Cube Core in a small basin/container and pour the misture over it. (Don't worry, the stickers won't peel off)
4. Use a rag/toilet paper to wipe the middle peices.
5. Assemble the Rubiks Cube again.
This is a much easier (and safer) way to lube your Rubiks Cube.
Heatfreak22 2 years ago
Credit to my buddy for teaching me how to do it.
Sorry, spelt Mixture to "Misture"
Heatfreak22 2 years ago
what if i don't have silicone spray
sudscope 2 years ago
this vid is good but for all the viewers if you don't have silicon spray, vaseline works great too...;.i've never used silicon spray personaly but vaseline works really well and, it's odorles and doesn't dry out hope it works!! :)
jadielj93 2 years ago
If you read up on rubiks cubing most forums say that vaseline is a horrible alternative. It erodes the plastic and destroys the cube. DO NOT use vaseline on your cube! The only thing worse than vaseline is WD40! Also, I read in many sections that putting sand in your cube is a bad idea as well. Perhaps the problem is people are not putting exact amounts on their tutorials and first timers end up putting too much sand.... lol
MrMuMbLeY 2 years ago
Ya know whats interesting?
OLIVE OIL works great! my friend used olive oil and it spins like the speedcubes! and he has a store bought Rubik's!
its pretty cool :)
vladimir0B 2 years ago
I've been meaning to lube my cube for years now.
orangeautumn42 2 years ago
why stick to rubiks? get a DIY or a DS.
CPBlazier 3 years ago
Eastsheens are great!
especially 5x5's!
vladimir0B 2 years ago
haha i just wd40'd my cube
ill tell you how that goes :(
jtman54159 3 years ago
will wd40 work?
bossman823 3 years ago
ok =D
azurezinc 3 years ago
im in singapore n i dont know where to buy silicon spray
azurezinc 3 years ago
does wd-40 works?
zamm0rock 3 years ago
Sounds like the Ice Cream Man music from hell...
TheCritaKill 3 years ago
video is too bright, can you make it darker next time?
ghf4 3 years ago 23
Lmfao
shawszaa 3 years ago 7
hey...
can i use silicone instead of silicone spray?
0Doomsville0 3 years ago
is there any differenence in the silocon spray because i used some an it made my cube suck. how can i prevent this
sqwagg 4 years ago
make sure it gas no petrollium in it
69krazykid69 3 years ago
lol sum1 watches resident evil....greta vid, helped me alot
pheromones979 4 years ago
umm.....>.>.....how does the sand help?
shinigamijoker 4 years ago
sand is GREAT! I put a bunch of sand in mine and is SO smooth now!
ghf4 3 years ago
you really put sand?
what type?
TheMonkeyCrackHead 2 years ago
Comment removed
vladimir0B 2 years ago
thankyou
beho1124 4 years ago
What hardware store did you get your silicone spray?
beho1124 4 years ago
cool.. i'll try it.. btw.. nice Resident Evil BGM
KKDDML 4 years ago
why do you put sand in it afterwords? it doesnt make sense...
slncuber21 4 years ago
How noticeable is the difference? My cube seems tighter than before
ManskeeDeluxe 4 years ago
were do u get the spray
daxx775 4 years ago
nice music. good video. i wish the quality could be better though. :-P
PestVic 4 years ago