Rubik's Cube - The EASIEST way to solve it - Part 3

[DarkestDeath97]

This guy really did help me

[MrILoveAppleiphone]

pls help

[MrILoveAppleiphone]

dont work the corner pieces

[kimmy121397]

thank you so much may God bless your Italian soul

[1996natedog]

You just dont understand how the cube works with the algorithms he is showing you, work i know a couple different ways on how to solve the cube but this last part is prolly the least efficient

[RoyaleInliner]

In the new video you're making, will you talk about when none of the corner pieces can be inverted (the opposite of the first move sequence). My bottom color is making it impossible to invert the pieces right. Thanks!

[lucatn]

@RoyaleInliner I'm making many short videos, each with a different situation...each video will guide you to the solve of the cube. All the corner pieces can be inverted, if you don't find your cube in any of the cases, pull out the piece and re-place it in the correct position!

[RoyaleInliner]

@lucatn That sounds great, thank you very much. I've solved the cube a few times but I can't figure out how I did it. The videos sound like they will help a lot.

[noorakhan1231]

i had stuck with the last layer plz help

[killedgrave]

the inverting part doesn't work you keep inverting everything you will never solve it..

[lucatn]

@killedgrave You have to invert two corners and than fix the edge on the second layer....than check the other 2 corners

[Uzair534]

@lucatn Hello.I have learnt alot about how to sove a cube I can not solve upper side of cube and other two layers but I havae been confused in solving the upper part if the piece come in 2nd layer than how to do the elevator formula without ruining the whole.Thx alot.......

[SepGamers]

I solved a 1x1x1 Rubik's Cube!!!

[sanjibvideo]

Hi... can u post another video for specially orienting all 4 corner in different way.

[lucatn]

@sanjibvideo I'm recording a new version for this last part...

[MrBerryNut]

Help I'm stuck. My cubes third layer is not anything like this. I hope you make the new version soon. But the other vids are great I memorized how to do it up to here.

[lucatn]

@MrBerryNut While waiting for the new version remember: if you don't find your cube in any of the situation described here, pull out the piece and finish the cube...scramble it and it will never happen again!

[sekotsmg]

At the beginning of the video where you need the two corner piece in the correct position, I never have that, and when I do there is no correct corner piece on the top of the third layer. Help me!

[bhlk12]

i LOOOOVE IT when u say down with these 2

[Xaviostia]

@bhlk12 hhahaha me 2 that was like the hardest part

[lucatn]

@Xaviostia I know this is the hardest for most of you....i'm planning to make something totally different in place of this part. Hope you'll like it...

[lucatn]

@bhlk12 I guess some just listen to me without handling any cube...i can't imagine it!

[abdeel13]

what if just 1 corner piece is in the correct position ???

[ilsewz]

I think your videos are really helpful! You explain it all clearly, and by following your instructions I learned how to solve it and now I can do it much faster. For me this was the only video explaining it in a relaxed and easy way!

[AHALOPRO]

yesss... easiest way you sure are right!

[TheAceofspades01]

Your method is very confusing and didn't teach me how to do it. I watched numerous amounts of other videos before I could actually do it and looking back on the videos now yours was the only one for me that made no sense

[AwsomelyEpicnessness]

can you take out the peices without breaking it if its a newer cube??

[lucatn]

@AwsomelyEpicnessness I guess you can...try behind the white central with a screwdriver!

[Twoidiotsunited1]

this is so hard and i cant get it right please make a new version of this video!!!!!!!!!!!!!!!!!!!!!!!

[lucatn]

@Twoidiotsunited1 just let me celebrate new year and i will be back with a new video....

[ToniandBonnie]

@lucatn I think your explainations are fab.... watched several videos and yours was the only one I could understand.... love the analogy of the lift in part two. I am now at the same point as @neek400, where I have one corner correct, and the only inverted colours matches the one thats on the bottom face. Looking forward to viewing your other videos. :-)

[MinecraftTNTstuff]

Thanks man. a week ago i coulnt solve this at all. now i can solve it in 2 min 30 sec

[aquasquid36]

@MinecraftTNTstuff cocky

[SmithDickie]

I've run into a problem I don't think is covered by your video. All 4 corners are in the correct position. I've tried the move sequence of down left/right up left/right down left/right left/right up 180 and it just sends me round in circles.

[lucatn]

@SmithDickie I'm planning to make another version for this third pard in these days...too many of you are having problems...this video will be replaced soon!

[Kennyyiie]

This is the part that's the hardest for me, all other parts i can do my self with out video help

i often get the problem that i have to switch place between two opposite corners in the bottom layer, its really hard and it's not in the video how to do that easily

[lucatn]

@Kennyyiie I'm planning to make another version for this third pard in these days...too many of you are having problems...this video will be replaced soon!

[ambhuvan]

@lucatn whenever u complete inform me please!!!! I need to complete the rubik's cube

[lucatn]

@XxXiLuvvBoizzzXxX Noooo, never give up with the cube! You can beat him!

[2Awesome4Cmprhension]

If no one gets help from this go watch Dan browns tutorial then click on the annotation in Dan browns tutorial to the improved version which is very easy to understand, his username is pogobat

[Neek400]

I have 1 corner that is correct but no iverted colors...what should I do?

[lucatn]

@Neek400 Find a corner with the colour of the bottom in the down left position and start on the right side....i say this in the video.

[lucatn]

@Neek400 I'm planning to make another version for this third pard in these days...too many of you are having problems...this video will be replaced soon!

[098gd]

@lucatn the peaces i need to invert are alway the coulor that goes on the bottem no matter how i do it

[BigAssDeluxe]

keep your damn cube straight man im getting so confued

[lucatn]

@BigAssDeluxe I try to move the cube the less i can to help you.

[killacharnay]

at 0:08 mine arnt like that at all

[killacharnay]

im soo confused i got the 2 layers then the last one confused me

[bobieXxXrwjtroll]

5:44 2 corners

[willl0014]

NICE TRY!

[Blueeyes981000]

@luctan What if my cube has two sides oriented and all of them in the right position. I have tried to take the cubes out, but they won't come off. What should I do?

[098gd]

at 0:08 mine are red where his are yellow what do i doooooooooooooooooooooo

[99cengo]

what if the colors needed to invert were red

[098gd]

@99cengo i think i got that as well ; at 0:08 mine are red where his are yellow

[MsCool595]

i get annoyed and just pill the stickers off and put them in the right place :D

[vanChillotrab]

what to do if i have 3 corners in the right position but i don't know how to put the 4. one right oriented?

[lucatn]

@vanChillotrab As i said in my video, if you don't find your situation in your cube, full out the piece and re-place it in the right position!

[TheCynial]

@lucatn Its been 10mins and I still can't disassemble my cube :( I have disassembled my friend's cube before but only this cube is not getting it x(

[lool283]

you were closed in a room when you were 4 years old and you only had such a cube....at silvester 2007-2008 you could escape from this room and make this videos in february

[lucatn]

@lool283 It may sound very strange, but it has been more or less like this...When i was 10-12 i remember i was moving the layers of the cube thinking "this is not just a game, this is something more!". Now i understand exactly what i was just thinking!!!!

[TheBartgry]

Easy?????

[Argia60]

If you have 4 not oriented corners, you do twice the 3 corners rotation moves.

At least, you only have to put the edges at the right place. I've not seen yet the part 4 to see how you do that.

[Argia60]

You're using too much moves to only put the 4 corners at the rignt place. If it is 2 next corners, you can invert them in 8 elementary moves. And no edge is moved. If it is 2 opposite corners, you can do it in 14 elementary moves. Likewise, no edge is still moved.

Afterwards, you can have 2, 3 or 4 not oriented corners. 2 not oriented corners : you can do it in 14 or 16 moves (no edge moved). 3 not oriented corners : you can do it in 8 moves (3 edges moved on bottom layer only).

[millerhunt7]

don`t need to much thinking... just follow the order and it will complete.

thx man you helped me.

[ImmaDrumm3rXD]

I got really confused at that last part.. o-o

[Virus2k5]

I GOT IT I GOT IT !!!!

[grabbarnagres]

if i dont have any like that what i do

[lucatn]

@grabbarnagres Pull off the pieces and re-place in the correct position...than it will never happen again!

[ChipGlairz]

i'm very thanks Lucatn the master of rubik cube! u help me alot

[Stephenopolis1996]

Would be better with algorithms. Helps me keep track of where I am

[inLabwityu]

i really can't understand this part T______T can someone explain it to me clearly?

thanks

[PoxHD]

@inLabwityu I can't understand it too..

[inLabwityu]

@PoxHD gaaaah. i couldn't finish my Rubik :3

[PoxHD]

@inLabwityu I SOLVED IT, AND I THINK I GONNA MAKE A TUT...

[inLabwityu]

@PoxHD waah. really? good for u..

[jake2500000]

you sir just taught me how to solve a rubix cube, you are now my friend :)

[evilgenuis13]

I have no corner pieces that are correct O.o they all have the bottom. How do i fix that?

Thanks:D

[lucatn]

@evilgenuis13 Try inverting two random corners...

[OfBodomChild]

this guys fucked things up

[oldspice2625]

Using this method, or "Lucatn's Method" we shall call it... my cube is now 75pct done. I tried Pogobat's, a couple others like Ccel and all that... they spoke too much math to me... they made it so complicated. I don't want to understand the math behind this...I just want to solve it in an easy to remember way.

Lucatn does this. his method is by far the most superior. Perhaps not as flashy as the others, but it's simple, easy to remember, and he makes his moves slowly so you can understand it

[lucatn]

@oldspice2625 Thank you! This is what i meant when i decided to make this video!

[alb123pol]

what if i have all three corner pieces down but only one is in the right position but i only need to change it of side?

[lucatn]

@alb123pol If you don't find any situation i show, just pull out the piece and re-place it in the correct position:you have to see the cube finished at least once before scrambling and solving again!

[TheRequiemMaster999]

What do we do when we have all 4 corner pieces positioned but not oriented?

[lucatn]

@TheRequiemMaster999 I show all the possibilities, if your cube is in a different one, just pull out the piece and re-place it, it will never happen again!

[belgvr]

sometimes, i use to confuse myself so i accidentally destroy my cube... i know i should pay more attention, but... is there an easy way to restore the cube?

[lucatn]

@belgvr The fastest way is to scramble again the cube! If you practice enough with the cube, you will be able to understand how to restore a mistake...

[htirah100]

lol i think ur move is easy to follow step by step but pogobat do it so fast

[godsmackfan1000]

I personally would recommend Dan browns video on how to solve the rubiks cube his method is easy to understand and much faster than this guys

[AyfoZ94]

After 45 minutes of replayed footage, several accusations of witchcraft, a misturned layer, a broken headset, and a mental breakdown. I sit here staring at my Rubik's cube after being once again defeated until i get the courage to try again in a few months

[lucatn]

@AyfoZ94 I hope your cube is finished by now!

[zarishize]

ohh u are teaching so well.... :) i have visited your channel ... 100 tyms yet ... :D

[lucatn]

@zarishize Thank you! Keep visiting, i don't have much time but i want to go on with other games!

[13x23narutofan13x23]

wah to mouch information D:

[lucatn]

@13x23narutofan13x23 Seems too much, but if you reach the and, you'll see it isn't!

[13x23narutofan13x23]

@lucatn ye ^^ but i takes more boringness if i just try without tenque and i think thats the piont in this think to play with it :D but ty anyway for trying to teach me

[bossbeate398]

i can do it all untill part 3 :(

[lucatn]

@bossbeate398 Seems that part 3 is the most difficult part, even my italian fans tell me so..

[Jakalattack50]

Hey dude!!!! Why didnt you just solve and finish the whole rubik's cube???

[lucatn]

@Jakalattack50 In some of my videos i sove the cube!

[hrhsnh1994]

hey iam nt geetin dis part.....

y m nt gettin only middle color is oriented??....

[jojjo65]

Best tutorial ever. Very clear! Thanks!, Btw your english is good, don't worry, it isn't that bad :)

[lucatn]

@jojjo65 Than you!

[RedGripProductions]

I have two corners oriented and the other two are positioned, but i dont have one red peice in the down left position

[lucatn]

@RedGripProductions Try inverting 2 random corners or pull out the corner and replace it!

[parrotbut]

i have no two corner pieces on the same side :L

[lucatn]

@parrotbut Invert 2 random corners

[dudiliduful]

Omg! I finished the cube in this video! I dint need to do the 4rth part. Thank you so much man! :)

[lucatn]

@dudiliduful 4th part is just to point some move sequences

[LakersBeast22]

Hey guys, if you are having trouble with this step, just check out my new channel and each step is a video just like this so that i can get in detail on each part

Check it out plz!!!

[opreaisebastian]

at 0:20 you already have a color on the same side,yellow(you should make a movie when you don't have a color already) because,amateurs like me should understand easier....other than that,good job!

[rughr008]

aaah! this is definately the easiest way... you don't have to remember LOADS of complicated sequences!! thank you :)

[lucatn]

@rughr008 Oh yeah! You got the meaning of my video!

[ColonelSanders9611]

@shizzbizzproduction9 Where's the fun in peeling the stickers off? You don't have as much a sense of accomplishment if you do that!

[lucatn]

@ColonelSanders9611 I TOTALLY AGREE!!!!

[GGGZ3]

Would if the two colors on the corners (that you talked about in the beginning) are the color of the bottom?

[pey3b]

I have to be honest, this is the weirdest way i've ever seen on how to solve, and yes I can solve it myself. Instead of this, check badmephisto's instead, his vids are better in they ways of english and guide.

[hNsGregrz]

Wheres my T ladder

[Scipiothegreat]

You helped me solve my first cube ever, thank you for this easy set of algorithms :D

[TheMoazin]

i have a problem in solving the last layer the corner pieces are not matching all four are matched but two are oriented and two not pleaseeeeeeeeee help me

[0ilvux0]

i have all corners in right places!but middle, down of all sides is in the down colour what i need to do?

And in first time my corners is too not oriented, but in second time its all right!thanks!

[chainchompman]

...I peeled the stickers off and lost them all... So technically I solved it because one side has all black, one side has all black, so do the other 4

[basselh2]

Thumbs up if u watched continued watching this b/c of the accident

[noah0link]

I HATE THIS I AM CONFUSED!!! my corners wont orient

and if they do only two of them are right the other two are supposed to be on the opposite sides

[shizzbizzproduction9]

Dude, the easiest way is to peel the stickers off!

[888tsuna888]

lol picis 

[Emery8938]

I found this the best one to follow and I was surprised how quick I picked it up. And completed the cube. Thanks

[Mas73rR]

NEW Record 8mins23sec :))) TY DUDE

[devosam2]

I have only 1 bottom edge perfect and i've 2 faces with red on left and center.

How to go about??

[SebsBowser]

if both have to be inverted?

[VideoPictureBox]

What if you don't have any corner pieces that match in color?

[chavez0227]

Everything on mine is opposite of yours I'm frustrated

[Miguelacopt]

So many misleading info here

[lilpimpjr12]

I CAN'T UNDERSTAND A FUCKIN THANG!

[DaStaticBoy]

Good video. You have a really relaxing voice

[happynessforyou]

go learn some better english

& SHUT UP AND STOP SAYING ' THE CORNER PEICES!!' (at the start)

[jointhe4ce]

@happynessforyou how about you give him some respect. Dont fuck around with ppl you little fucker

[XxSuperShadicxX]

Dan brown's tutorial is better.

[XxGuNxXoriginalchann]

puoi farlo in italiano??

[alibunxious17]

This is helping so much :) Thank you!!! And your accent is lovely :)

[147kitten]

you can't copy these because they are messed up in diffent ways

[TheAwesomeplanet]

or you can go to wrongway(.)org/cube/solve(.)ht­ml

[lorenzomusic95]

I DONT GET THIS STEP

[omgwtf999965]

what the FUCK is wrong with your thumbs?!?

[MrSevenOfSpades]

he made me sleep

[TheSixela15]

I really wanna learn how... Complicated

[ShinyLion100]

or just take the piece out and place it in the right place...

[verkyle20]

This parts not so easy D:

[The12345callum]

When you did the move where it made the cubes corners all oriented I did it but it only worked for 3 corner pieces and the last one you had to turn clockwise to make it all good I was wondering if you knew how to fix this?

[lucatn]

@The12345callum You mean that the last corner is not oriented?

[azumesta]

it's not very easy if u ask me

[Ckuzaeu]

if you have three corners oriented

and the last is good but yellow its in front, must be up. green its in right side must be in front, and the orange its up must to be in right. please help!

[lucatn]

@Ckuzaeu It's impossibile to have three corners oriented...pull out physically the piece and re-place it in the correct position!

[toinoulalanne]

You're my god !

[lucatn]

@toinoulalanne Oh my....

[Animal00Kaiser]

@lucatn LOL

[bittonbeaton]

i got the first 2 layers (thanks) but the third layer i get in the middle of each side the bottom one (same couler) (in your vid its red),what do i do? thanks

[lucatn]

@bittonbeaton You have to move down the colour that has to be in the bottom, by moving down two pieces at a time, OR with the move when they are 90° each other (x2) OR when they are 180° each other (x2)

[00sunshine001]

i didn't find two same colors in the 3rd. layer :( and i did not understand "inverting two corners" ?? help please?

[lucatn]

@00sunshine001 Inverting two random corners means that you have to do once the first move sequence i show in my video.

[idonthaveone9]

i have the first two layers done, thanks to you but on the third when you tell us to find two same colors on one side, i cant find any so how would i fix that?