Detail Airbrushing on Chrysler 300C airbrush mural: Part 2

[DrawingsByDerek]

wow! This is great! How much did you charge? 

[romiog817]

Im fixin to purchase an iwata.... Just wondering if you could point me in the right direction and tell the iwata airbrush gun you find to be ideal for this type of mural.

[296jayce]

SICK!!!! ABOLUTLY SICK!!!!

[xxIGEO17Ixx]

U USE THE SAME AIRBRUSH FOR CARS,SHIRTS,MURAL,ETC.RIGHT? U JUST CHANGE THE TYPE OF PAINT

[hihihoho1234]

do you thin up you're paint?? and what's your needle size?

[shadydacho]

second song?

[airbrushpower]

@shadydacho : Magic Carpet Ride. Cover by Fatboy Slim

[MasterTenku]

bad ass

[MsRobi1969]

super made. Greetings from Polish

[100puerto1]

sik work!!!nice detail

[principemoska]

Muito bom mano.

[daytonjacobson55]

This is sooooo goood!!!! you should to do work on my s10:) i want to learn how to do thiss.. never be good as you but.. haha what air brush gun would be best for me? i dont wanna spend more than 50 for my 1st gun.. thanks mann

[cyeber2004]

Man.. that is seriously cool.... I would love to have your artwork painted on my wagon...

[ASPEDBUSDRIVER1]

wow dude that was sick. how would i go about getting into this stuff?

[Achmodethefallen]

awesome how you play with the shadows.. and awesome airbrush... is it the eclipse from iwata..?? love the fine lines...

[1761341]

so i bought an airbrush... the infinity two in one... and when i spray it, it splatters the paint and its just horrible. anyone know whats wrong with it???? im getting soo irritated.

[Achmodethefallen]

@1761341 your paint is not reduced enough... or you are getting water from the compressor...or the airbrush is dirty .. try gibing it a good clean .. and add some filters to you air line.. then check how dense is your paint... and don`t let paint dry at the tip or problems may occur..

[knec85]

did you use stencil????

[f20a4bb9]

when airbrushing a girl, 99% of artists start with the boobs when detailing. :D

[Jaccopouw]

i like the boobs

[Nortontree1]

That is Serious!!!!!!!!!!!!!!!!!!!!!!!­!!

[airscrew1]

I can't believe that four people have given this a thumbs down????

[airscrew1]

Wow!!! Daniel is GOD. What wouldn't I do to be able to paint like this. Mindblowing work.

[spirkox]

BRAVO !!! ( clap clap clap clap clap clap )

not one single detail mistake... Awesome..

[gynbr]

Hello friend

His great work, I'm from Brazil and would like to know if you can give me references about the airbrush you wear and if possible where to buy.

Thanks

brilliant work

[chatoporvida420]

nice work man! you have some skills

[mario2489]

thats tight bro you got skills say what its the name of the song in part 2 on the chrsler 300?

[elchepe34]

how many psi u pushin? like how many on metal and how many on cloth?thanks and hell of a job

[dragonmarx76]

good job

[ogpdub]

Holy shit, you're the one that made this mural?! I've seen it on google tons of times...

[manofink]

wat part of the car is dat?

[LuvSicc]

I'm sure if 50 cent saw this, he'd cry. Cuz ya made him proud! lol.

I was dumb struck & in awe when I saw it! GREAT WONDERFUL JOB!

[s4nfr1sko19]

what kind of airgun are u using? i like the thin lines it does would you mind answering me back

[cool66impala]

how do u get such thin lines and what kind of gun is that if u dont mind me askin?

[bazeque]

i think he is using iwata eclipse and to get thin lines u can try to take the tip of the air gun off so u expose the needle and get a finer lines.

[Stuart029]

If you read the info he says he is using this airbrush............Airbrushin­g on a Chrysler 300C boot/trunk lid. Airbrushed with  Iwata Hi Line and Auto Base coats in true Black and White.

[Stuart029]

This is the airbrush he is using if you read the info.....Airbrushing on a Chrysler 300C boot/trunk lid. Airbrushed with Iwata Hi Line and Auto Base coats in true Black and White.

I first added too much red to the grey to cancel out the green.........................­......

[hammlars]

damn....just curious.. how much would a job like that cost? and how long does it take usually?

[lunatic200]

Awesome work Daniel! I couldn't bare to put that back on a car - I'd hang it on my wall LOL

I'm hoping to attend some of your classes next year when I move to Vic - I'm currently living in the NT :)

Keep up the great work!

[xXGNR1990Xx]

omg

[56NK]

wat paint r u using is it already reduced?

[idontdrink]

finally, i've seen loads of airbrushin on youtube an there not that good to be honest, this is really good, how did build up the picture? what colour did u start with?

[ferda20]

luxus

[HHtiempo0]

Impressive, I wish you were at an event here in Mexico to see you working.

Very good job.

Peace.

tiempo 0

[Tsukiyagami]

Amazing work!!

Congratulations =)

★★★★★

[Zwitt3]

whaoooo excellent work !

[superzaff]

This is for me real Art.

[airbrushpower]

Thank you very much.

[eatmyspykes]

Do you use any other airbrushes in conjunction with this one, or do you find you can do almost everything you need to with it?

also, how wide can you get the spray to go? do you need another airbrush to do wide stuff and background stuff?

thanks a lot for the vid

[airbrushpower]

For this scale of artwork all I used was the HI-Line. The background was whited-out with an eclipse suction fed. I Use the right tool for the right job. Ig you're looking for a good work-horse mid range airbrush, the Eclipse .35mm Gravity is fantastic. Larger scale background stuff I will even go to an RG-3 touch up gun.

[02011982]

Is that Custom Micron CM-C +? great work man. That's what I like to see.

[airbrushpower]

It's a Hi-Line, not a micron. :)

[atour123]

Looks real good. How long does it take you to do a trunk lid like that?

[airbrushpower]

After the design was done it took about 2 days.

[BITCHFUCKER45Bln]

Awesome!

[weelzisme]

thats awesome mate, love the fine detail, ve got a little cheapy airbrush that ive only used like twice lol and after seein the vid i just wanna go start sprayin lol. btw, what is the name and artist of the second song... really catchy

[airbrushpower]

Thanks for the comments. The second song is called 'Magic Carpet Ride' and was originally recorded by Steppenwolf (whos other big hit was "Born to be Wild". This version is an awesome cover done by Fatboy Slim.

[wildnorske]

Pure Art! Nuf said!

[fracks]

what kind of airbrush is he using?

[EdwinM44]

so nice, looks almost real. Exellent work

[pound4pound4]

THATS HOT MAN!

[r0dd13]

Very very cool, truly inspirational, just got myself an HP-CH and can't believe the detail achievable in a talented experts hands such as yours, I'd better get practicing!

[FrankieSquid]

Tight.

[77777jax77777]

does using a shield help with making thinner lines?

[airbrushpower]

It doesn't so much help make thinner lines, as sharper ones. You can, however, do super thin lines but using the single cut technique.

[tinaworrall]

Very Very Cool! What airbrush do u use for such fine detail?

[airbrushpower]

Its an Iwata HI-Line with Mac-Valve. Great Airbrush! :)

[tinaworrall]

thanks for that :) have a great day!

[tcorvette08]

ture master

[edhubbs]

I talked to you at Sema but didn't realize this was you. Awesome free hand skill man.

[airbrushpower]

No worries mate, its all good. It was lovely to meet you at SEMA. :)

[edhubbs]

Well now that I know who you are I will have to buy you a drink at the Hard Rock. LOL

Have a good year and I will talk to you later my friend.

[lennypen1978]

i noticed that you use a kind of stencile to get quick steady lines thats cool, could you give me any other tips on how to get a nice fine line, thanks

[lennypen1978]

hey man ive done a little airbrushing myself, some of which i copy'd from the artist Boris Vallejo to get me used to my airbrush, ive become very lazey with it over the last few years but watching you at work realy gives me inspiration and make me want to do more, i some times have trouble getting a realy fine line with my brush which came be very nerve racking as it can be a real shitter when i make a mistake on a peace ive spent age's on

[airbrushpower]

I can understand that. I'm glad I've inspired you. Hopefully you're out there creating your own great art!

[prinzeroner]

fuuukk pause at 6:28 look inside that...diz is boomb shiit..props..

[chasa8]

hey bro i just wanted to tell you that you sure are some of the best at air brushing, its like thats second nature to you now but congratulations thats,everyones dream. i just got a new air brush in going to start painting soon, what do you recomend for beginers bro

[airbrushpower]

Thank you very much. I'd recommend me Power series level 1 DVD set for someone who wants to gain the control like is seen in this video.

[alextaillefer]

Great work !

Your details are tight, and you know how to save your highlights ! Keep on painting !

[PharaohMoan]

That is f*cking outrageous man. Excellent work.

Hey man...A friend of mine has HotRod Flatz for a paint job on his mini, and I know he wants to keep it flat. What type of paint would you recommend, because I know the water based paint won't last, and I don't think I can seal it with anything without defeating the Flatz purpose??? Any help would be seriously appreciated.

Inevitably,

A.Elizondo

[airbrushpower]

Sounds like you'd need to re-clear it with a matte/flat clear.

[Bartek506645026]

thanks for this video

[Bartek506645026]

I know-

[Bartek506645026]

super...............

[kyoheisukano]

oh man... that's amazing! I'm so adding this in my favorite! i love your artworks... keep up the good job! Just a question... how did you create every detail of her face? - it was so fine!

[airbrushpower]

In all seriousness......Practice. You need to know your fundamentals and know that you can do whatever stroke you need to when you need it. So practice, practice, practice! Not a sexy answer, but the truth. :)

[kyoheisukano]

hehe... not a sexy ans but the truth - LOL!!! but yeah you're quiet right. thank you....

[Bartek506645026]

you knocked after eyes

[Bartek506645026]

you knocked after eyes -kyoheisukano

[adryantl]

flipante tio eso si ke e arte

[ooQueso]

That is NUTS. Awesome.

[Yldii]

Nice job. Are you using a micron?

[airbrushpower]

It's not a micron, its a Hi Line 0.3mm nozzle and needle. :)

[slimeball23]

dude i have that same brush and it always spits when i do fine detail.. any tips?

[80tats]

great work! i like the soft detail:)

[80tats]

image projected?

[airbrushpower]

to get the basic landmarks up a projector was used. yup. :)

[reinaldolozada]

sick your sick with it good job

[XlXtremeXl]

Wow :p i don't know what else to say lol

[FilmForger]

Chicks look great - too bad the guy ruins it

[rodrigoruizramirez]

truly speechless about this artwork.nice

[mikev2012]

wow i am speachless that is great man u have a great tallent

[AjidWhampoa]

Where do learn to airbrush??

[timmy3317]

holly fuck :O

[Gizmo910816]

i dont have any fucking words to describe how impressed i am :O

[airbrushpower]

I think thats quite descriptive. Glad you like it.

[zioalzen]

you're the best...

[airbrushpower]

I just do my thing and do the best I can, thanks for the compliment though.

[graff90]

wonder.. how much cost this?

[airbrushpower]

The client paid $2500 for this not including top clear coat.

[graff90]

amazing..

[edhubbs]

LOL! It happens, I know I've accidentally deleted comments before and been like...ah crap! I just think your airbrushing ability is amazing. You really are one of the best airbrush artist I've ever seen. Keep up the amazing work my friend.

-Ed

[airbrushpower]

Cheers mate. I truley appreciate your comment.

[Mrdist]

fantastic work m8!!!

[airbrushpower]

CHeers Henry. Coming from you that means a lot! Your work is some of the best I've seen Mr Dist.

[ThatsDiesel]

Where you got the picture, you painted after? The Web?

[sempaystz]

just "FREAK". WoW man......

[hermanbong74]

wow... this vid made me sell my airbrush.

[rokobilly21]

that takes talent do you pinstripe also or just airbrush? let me know when your dvd is out. what was the color u used before the black?

[timberwolf7102james]

Wow when i first seen you touching the arm with black i was like aww looks better without it then see after the cam pulls back ..awsome ..I been in bodyshops sence highschool (18 years) and got bored Seeing this i really want to take up airbrushing can you tell me whats a good paint to use (cheaper then house of color) ? don't want drive a ferrari before getting a licence lol

thanks for the post great work

[airbrushpower]

Thanks for the props mate. Any Automotive base coat urethane can be used to airbrush. Just reduce it down to a consistency of milk. For finer detail just reduce further.

[TRizmylife]

u r a god in airbrushing i'm not even one sixteenth as good as u r keep it up

[undhockey24]

damn that is awsome things like this keep me goin with my air brushing and hope fully be this good

[airbrushpower]

Thanks man, appreciate it. Always keep painting!

[jossss11]

how many hours ?

[airbrushpower]

About 30 hours or so. I should've kept better track. :)

[arabjoyroad313]

do you have to clear coat it after your done or what?nice video and art dow

[airbrushpower]

I was clear coated after the airbrushing, though I didn't do the clearing. It was cleared, blacked back and flow coated for that deep glass finish.

[arabjoyroad313]

man thats cool...can you work for me!cuz your good a hell,a man like you should get respect and get paid good!

[airbrushpower]

'It' was clear coated after airbrushing and it was 'blocked' back. Excuse the spelling, it was very late when I responded last night.

[ManiieFresh13]

dam man u r one fu2kin goOd airbrush expert, lyk u r the type of person that does work that inspires me to continue airbrushing and one day be like youu...mad respect!!!!!!

[agonyuncle]

amazing stuff,what talent

[pongkoy2506]

wow nice! what kind of airbrush are u using? cm-c plus?

[airbrushpower]

Its an Iwata Hi Line 0.3mm with Mac Valve.

[crazddrifter]

ahhh crap that abcj17 is my brother this is my profile:)

[abcj17]

nice job power:)!!!!!

that is goona be one sick looking 300c, did you just do the boot?

[airbrushpower]

yup, just did the rear of the boot.