A Closer Look At The Bio's On The ASUS P5Q-E part 7

[GamingYuri]

to change the Dram voltage you need to go to AI tweaker or something

but it isnt there at my bios.

and my Dram is over powered and gives me the bluescreen 0x00000109...

how to get it open?

[vskylinespec]

i like how you said "its ridiculous" @ 3:55 lol. cuz thats what im saying too.

[lumpylives]

BIOS not Bio's

[DeeJay33133]

hey i have the same mainboard and a Q9550 on it.

can i put the cpu on 3.4GHz stable ??

i only use 800MHz Ram , so i won't get higher than FSB400MHz =3.4GHz

is it possible on that MB

just asking b4 i try it out.....

thanks in advance

[grove005]

this is so confusing... there's no cpu multiplier that means you cannot actually change the multiplier of the cpu..... Hey man can you please examplain the CPU RATIO, FSB FREQ, and FSB STRAP???

Tnx..... you can send me a message if you'd like

[JeefCakes]

Bye-Oace

Say-da

Ex-cape

hehehehe good vid though

[osmanoman]

Is the ASus PQ-E compatible with the newer Q9550 processor with the E-0 stepping technology?

[bluesteelMCN]

Of course it is.

[Izak80]

Hi

I'm am about to buy a Asus P5Q-E together with a Q9550 and Corsair TWIN2X 6400C4DHX DDR2,4096MB Kit w/two CL4. I'm not into overclocking but would like to at least reach 3,2GHZ on each core of the processor. What do you think for such a small oc, is it enough to only change the FSB from stockspeed to 400Mhz (8x400= 3200)or are some other changes required and in that case what would they be?

Thanks

Isak

[KandAshow]

Yes you could just change the fsb to 400, that will work fine. You might also have to increase your voltage a tiny bit, but thats no big deal. You might want to also think about getting an aftermarket cpu cooler too.

[Izak80]

Thank you for your quick answer.

I forgot to tell you that i'm also bying a OCZ Vendetta 2 (Cpu cooler), would that be a sufficient cooler for overclocking a Q9550? Do i have to change any memory-settings so that i don't damage the "Corsair modules" and in that case what would the changes be? What is the original voltage for the cpu and what does "increase your voltage a tiny bit" mean in real numbers? (pardon my english, i'm only a hardrocker from sweden)

Thanks

Isak

[KandAshow]

my mistake, the website is:

overclock(dot)net

[vskylinespec]

lol 666

[boothhead12]

Awsome have to get one will be awsome when built Again awsome

[ChopperX]

preety much the same layout of my asus p5e x38.

[KandAshow]

oh, well im used to crappy amd bios. lol. THere not that bad.

[GrimmR7529]

Thanks man,

Finally, have been looking for something like this!! Have just bought one of these and nto familiar with this BIOS.

[KandAshow]

Your welcome, the bios is pretty easy to understand once going through it a couple of times and just messing around with small overclocks. I was dumbfounded when I first saw the bios because I always had AMD systems and the bios and fsb standards were all really different. But I understand the intel bios now :).

[arsenal553]

Wow 3.7 GHz on a quad core nice job. The Q9450 is already amazing on stock clocks, your comp is a real crysis killer

[KandAshow]

Thanks it was really easy too, I have the voltage set to auto and it works great. I'm tempted to push it farther but im getting scared it my blow up or something lol, but I have yet to experience any problems with it. No blue screens, artifacting or temp problems. (knock on wood)

[arsenal553]

Nice, on auto make sure your ram isnt being overvolted because when my voltage was set to auto my ram was being overvolted