@marek0086 not really huge for a stock rod, its huge for stock rod bolts. You cant just throw that much horsepower at stock fasteners and expect things to hold together. People put these numbers to stock rods and they hold just fine, the only difference is they use better rod bolts that don't stretch and spit out the rod. Either way, it is the builders fault, you don't build an engine right at the edge of blowing up, you build it to take more than you are giving it.
@marek0086 people put 600 to the stock rod with upgraded fasteners and it will take a lot more abuse than 2 dyno runs before blowing, and when something does go wrong, it won't be a rod coming through the side of your block. It's really a simple and relatively cheap way to eliminate one of the biggest problems of these motors.
@marek0086 340hp is very conservative. I wouldn't put 600hp to a stock rod, but I have seen it done, and it worked great. I have an sr20 with tomei internals in my Datsun 510 and at 8psi I make 387hp at the wheels with a stock rod, albeit a pretty much unused rod to start. sr20's are pretty bulletproof if you build them correctly. The thing I don't understand is why you would put that much power to it without using proper parts, then again there might have been an unseen problem already.
@marek0086 I have a feeling this engine was just slapped together and over boosted with the wrong internals. A lot of people are reliably getting 400+ on stock rods and pistons, but they are likely using almost new parts. The condition of your internals obviously plays a major role and who knows how many miles this lower end had. Some shops will give you lower numbers to save their asses (and that is respectable) but the real numbers are usually more if done properly, although a little unsafe.
@mikemilenko50187 When oil heats up viscosity drops especially if he was using a thinner weight oil to pull max HP out of that engine. Did you ever see how liquid hot motor oil is?
bwahhaa i love how when something bad happens on the dyno the crowd cheers... you know deep down inside the owner is thinking omg all this money i have to spend to fix it
whooo ahh weeee he he everyone laughs as this poor sr20 is no more ....they dont know how much a new block is gonna cost and all the hours tuning :( rest in peace little engine that could...
@RXHardstyle new block new pistons new rods Completely Rebuilding the engine cleaning.. Depending if shards of Metal got into the Oil Pump then you would need a new pump as well.. that's something you don't want to see is a rod going threw the side of your block... Besides it was probably his fault anyhow.. you see how Dirty that OIL was.. If you are doing Dyno Computation you would think you would Change the Oil to new.. That engine blowing could of been saved just buy having good clean oil..
@andgate2000 depends on the tune.. it happends to big engines too.. thats where the fun is getting 537hp from a lil 2.0L engine most 6.0 v8 arent even round there
This engine just wanted out... Once the owner put those wheels on it, the motor became suicidal... Don't cheer, all it wanted was a hug... And some different rims.
WOW 117 people dislike his rims thats like going to a swimsuit contest and bitchin about the chicks high heels, They are probably the same people that go to shows and park their cars way down the road so no one bags on them lol
@Logo3801 You could use better grammer so people could fucking understand you. Valve float is when the valve doesnt have enough time to close before the piston moves to top dead center and the piston can smack the valve causing your engine to fuck up. valve float wont cause the motor to throw a rod. Bad rod bearins or the motor seizing would cause a rod to break.
Now this is a spectator sport I can get behind. People showing off their modded car's power and then destroying the engine out of stupidity. I fucking love it.
yeah celebrate being an idiot
dedicated2grey 6 days ago
Filmed using a microwave?
driftking771 2 weeks ago
@driftking771 No a camera
crazyredneckwifknife 1 week ago
only a nissan would piss its pants and die at 580hp
10yroldcarlover 1 month ago
Good example of you to pay the extra hundred bucks for a good tunner and not for the extra 20 HP for some dumb ass who thinks he does !!
snailsnail43 1 month ago
@nowaynika yeah I know any motor can do that cuz of a half ass tunner,I was just quoting f @f Tokyo drift to be funny ;)
snailsnail43 1 month ago
Wouldn't have that problem with a v8 ;)
snailsnail43 1 month ago
@snailsnail43 Yes he would, cus then he would have boosted it way more.
Hoodstraps 1 month ago
@snailsnail43 v8s can do the same.... check out V8 holden commodore destorys engine on dyno
nowaynika 1 month ago
Damn that would have wreaked his turbo
kazzda 1 month ago
its because of those gay wheels, poor silvia!!!
kingnorlen 1 month ago 5
these ppl dont know how to build engines, 580hp and it blew a rod? that the builders fault
ImportsAreBetter 2 months ago
@ImportsAreBetter~ First get a clue on what you're talking about!
Those were stock rods!!.... 580hp at the wheels is HUGE for the stock rods!
marek0086 1 month ago
@marek0086 not really huge for a stock rod, its huge for stock rod bolts. You cant just throw that much horsepower at stock fasteners and expect things to hold together. People put these numbers to stock rods and they hold just fine, the only difference is they use better rod bolts that don't stretch and spit out the rod. Either way, it is the builders fault, you don't build an engine right at the edge of blowing up, you build it to take more than you are giving it.
gpc510 1 month ago
@gpc510~ so how much can the stock rods take (with upgraded fasteners)??
marek0086 1 month ago
@marek0086 people put 600 to the stock rod with upgraded fasteners and it will take a lot more abuse than 2 dyno runs before blowing, and when something does go wrong, it won't be a rod coming through the side of your block. It's really a simple and relatively cheap way to eliminate one of the biggest problems of these motors.
gpc510 1 month ago
@gpc510~ do u have much experience with these motors?
marek0086 1 month ago
@gpc510~ are u serious?!.... i was told by professionals that 340rwhp is the safe limit.
marek0086 1 month ago
@marek0086 340hp is very conservative. I wouldn't put 600hp to a stock rod, but I have seen it done, and it worked great. I have an sr20 with tomei internals in my Datsun 510 and at 8psi I make 387hp at the wheels with a stock rod, albeit a pretty much unused rod to start. sr20's are pretty bulletproof if you build them correctly. The thing I don't understand is why you would put that much power to it without using proper parts, then again there might have been an unseen problem already.
gpc510 1 month ago
@gpc510~ 8psi making 387rwhp?!... how is that possible?!
marek0086 1 month ago
@gpc510~ hang on... maybe im thinking about stock PISTONS.... maybe THEIR safe limit is 340rwhp.
Also, maybe they were getting some detonation on that last run.
marek0086 1 month ago
@marek0086 I have a feeling this engine was just slapped together and over boosted with the wrong internals. A lot of people are reliably getting 400+ on stock rods and pistons, but they are likely using almost new parts. The condition of your internals obviously plays a major role and who knows how many miles this lower end had. Some shops will give you lower numbers to save their asses (and that is respectable) but the real numbers are usually more if done properly, although a little unsafe.
gpc510 1 month ago
Shoulda put KA rods in her.
JeepYJJunkie 2 months ago
that has to suck!
tjr730 2 months ago
Comment removed
mikemilenko50187 2 months ago
@mikemilenko50187 When oil heats up viscosity drops especially if he was using a thinner weight oil to pull max HP out of that engine. Did you ever see how liquid hot motor oil is?
sbauroth 2 months ago
fastest oil change.
Zach4046792 2 months ago
ah the sweet sound of a rod being thrown lol
donandroz 2 months ago
thats what an sr does for yah
darkslidebs 2 months ago
@darkslidebs Agreed.
JeepYJJunkie 2 months ago
@darkslidebs~ are u stupid!?.... SR's are an awesome motor!
marek0086 1 month ago
ill say it again, should of bought a supra
abc212345 3 months ago
PUT A CHEVY ON THE DYNO IT WILL LAST AS LONG AS YOU WANT
12MOOSEHEAD 3 months ago
@12MOOSEHEAD dyno will show 0,0 though
koenerdoenig 3 months ago
A couple of sr20s would fetch a premium one week before Race Wars...
hoosyerdaddie 3 months ago 2
SUICIDE!!!!
flexxx222 3 months ago
If you could shoot a car in the head like a human, that is what it would look like.
lilbro209 3 months ago
it HAD 433 hp
tylines69 3 months ago
rrrnnnnnn klack klack klack klack .. kling kling kling kling
sounds like an traktor (0:20-O:21)
TheTiefbettfelge 3 months ago
bwahhaa i love how when something bad happens on the dyno the crowd cheers... you know deep down inside the owner is thinking omg all this money i have to spend to fix it
davinciiiiiiiii 4 months ago
580hp car that doesn't even start anymore...
Northiee 4 months ago
TOUCH THE OIL!!!!!!!!!!
bricknshit 4 months ago
those chrome 22'' rim or whatever added to much horse power and that happned
xDriftKings 4 months ago
That car have bum like young vietnamese prostitute!
TheKiefmike 4 months ago
did u hear the sound the BOV made when it went. Haha but that does suck.
bigblunts634 4 months ago
That sooooooo Sucks.
JimiKiwi 4 months ago
if that was my car i would make every single one of the crowd pay a dollar
almeer93 4 months ago
This has been flagged as spam show
I NEED NOS.
MY CAR TOPPED OUT AT 140 MPH THIS MORNING. MAKE IT ONE OF THESE, ONE OF THE BIG ONES. ACTUALLY, LETS MAKE IT TWO, AND HARRY, I NEED IT BY TONIGHT.
SmervySmerv 5 months ago
dose that oil look a bit dirty? or is it just me...
bouncyninja 5 months ago
Comment removed
bouncyninja 5 months ago
So much powa!! Even oil wants to escape from there...
thenxs 5 months ago
Reliable BHP, can't beat it!!
corvettecentral 5 months ago
VTEC kicked in!
Bryanx89 5 months ago
Weld it up, then buff it
pozestplatinum 5 months ago
580 HP to 0hp in seconds hahahahahahahahah
SgtPickledic 5 months ago 15
@SgtPickledic
Wish it were the other way around
PilatuS23 1 month ago
I like how everyone gets excited that it made 580hp, it now makes 0hp.... get excited about that!
Darrengrayy 5 months ago
0:19 The car got stage fright nd wet its self :D
7593ryan 5 months ago
whooo ahh weeee he he everyone laughs as this poor sr20 is no more ....they dont know how much a new block is gonna cost and all the hours tuning :( rest in peace little engine that could...
TheE30mate 5 months ago
dyno till it pops... pro tuners.
yarful 6 months ago
fuck that sr,put a rotor in that car and only then it will be a bad boy?
skeckevo 6 months ago
@skeckevo and last for about 5 seconds, you kidding?
Pigeon1888 5 months ago
it went from 400.5Kw to 0 Kw in a cupple of second's
joshyperk 6 months ago
it went from 433Kw to 0 Kw in a 1 second
joshyperk 6 months ago
it killed itself cause of those rims
killeez40 6 months ago
But does it blend?
paulbreor 6 months ago
Is someting like that reapirable?
dtiydr 6 months ago
@dtiydr depends on how bad the damage is
RXHardstyle 5 months ago
@RXHardstyle Thats true, looks like it wont be cheap though.
dtiydr 5 months ago
@dtiydr well yeh internals blowing in general isn't that cheap
RXHardstyle 5 months ago
@RXHardstyle new block new pistons new rods Completely Rebuilding the engine cleaning.. Depending if shards of Metal got into the Oil Pump then you would need a new pump as well.. that's something you don't want to see is a rod going threw the side of your block... Besides it was probably his fault anyhow.. you see how Dirty that OIL was.. If you are doing Dyno Computation you would think you would Change the Oil to new.. That engine blowing could of been saved just buy having good clean oil..
SgtPickledic 5 months ago
@SgtPickledic just give the crank a quick linish and dig the top of the piston out of the head you think?
I recon a unit sticker would fix the lot spend a bit more on a jet pilot one and you might be able to run a little more boost.
hschwerin 5 months ago 2
It's those shitty looking chrome wheels that did it.
DarryllK 6 months ago
lololol dumb ass
cordel666 6 months ago
Nothing like J-B weld couldnt fix...right?
mandrgalvan 6 months ago
Will it blend? No it won't.
crazycory25 6 months ago
1JZ>SR20
Sonicku 6 months ago
well done,SR stands for second rated.
skeckevo 6 months ago
cars use gas.
f123raptor 6 months ago
Little engines + big power= not for long.
andgate2000 6 months ago
@andgate2000 depends on the tune.. it happends to big engines too.. thats where the fun is getting 537hp from a lil 2.0L engine most 6.0 v8 arent even round there
bronxborn243 6 months ago
The engine has left the building....
catey62 6 months ago
10,000 down da drain
manoapimp 6 months ago
knock knock....
whos there?
rod!
rod who?
ROD COMING THROUGH YOUR BLOCK!!!!!!
megayachtlover 6 months ago 34
@megayachtlover lmao i love this
milljd28 2 months ago
Shit Rod lol
hypercordz 6 months ago
Chrome rims will do that to imports.
badopinion 6 months ago 24
what a badly made car
blandyist 6 months ago
hey think he had a rod knock?
porkman111 6 months ago
do they kill their cars on purpose?
jtmagicman25 6 months ago 2
what heppen
SniperForceCM 6 months ago
haha what happens when try to make horse power with stock rods..
super1vega 6 months ago
Happens when you dont tune properly your engine.
aavejga7 7 months ago
If I were that rod, I'd be getting myself out of that junk too.
AnthJP 7 months ago 2
now lookie there 580.7 hp to zero in in just a couple knocks
mikecameli 7 months ago
the car just puked
Venousdata 7 months ago
ahahahaha thank god another one bites the dust
bmx500 7 months ago
Even lighter weight rotating assembly :P
zorrlander 7 months ago
It blew it's rod because it was ashamed to be seen with those big ugly bling bling wheels!!!
bliglum 7 months ago 39
This is what happends when you don't grind your rice properly before putting it in the fuel tank
BoyPocketsJr 7 months ago
medic, someone stop the bleeding
Feenyxxx95 7 months ago
Clean up in isle four!
natchand 7 months ago
that's what happens when you tack it to the rev limiter and keep it there. Idiot
MrPenobe 7 months ago
This has been flagged as spam show
Well Thats your Problem!
danielh35 7 months ago
This engine just wanted out... Once the owner put those wheels on it, the motor became suicidal... Don't cheer, all it wanted was a hug... And some different rims.
240sxmetal 7 months ago 20
COOL OIL AND COOLANT TIME FOR A NEW ENGINE NO REBUILD THERE LMAO
biggdaddy2001 7 months ago
WTF? why is everyone cheering? lmfao
RyuuMasato 7 months ago
too much power babe....
magnum172 7 months ago
NOOOOO!!!!!!!!!!!!!!!
touchof17 7 months ago
yeah keep cheering, the owners now goona go kill himself
mayers000 8 months ago
That's what you get when put chrome rims on an S15.
BaldLocks 8 months ago 5
wouldnt like that bill.
tunastrike11 8 months ago
that sounded like a kompressor surge
streeatbeat 8 months ago
@streeatbeat It was, but only because the engine had blown / was in process of destructing itself
saintluke87 8 months ago
The fools. They need a nuclear reaction to generate the necessary 1.21 jigawatts.
Dickbaum 8 months ago 2
I'm sure he swapped another engine out. Hopefully a built S13 :) .
Lobo240sx 8 months ago
Thats the most Ugliest Japanese car I have ever seen...... And I drove a fucking Fiat.....
Cyberdeamon 8 months ago
@Cyberdeamon you suck dick faggot at least its not a fiat
BUCKSFANATIC614 8 months ago
All money spent on "FULLY SICK" outside crap, and nothing spent on what's actually important. lol... I love humans......
AUTURBO6 8 months ago
whats up with those wacked ass rims damn
socalevo9 8 months ago
i dont see why they would be so proud that this motor has that much horsepower. its not like its going to have it again.
chipwerbeski 8 months ago
the gas motorsport supra got 1400hp with no fkn problems!
yousifdude 8 months ago
WTF look at how nasty the oil is! maybe they should have changed it before making a dyno run....
Banakala1991 8 months ago
knock knock......
who's there?
ROD!!!
hachibill 8 months ago 77
@hachibill lmfao.
WTCHME 7 months ago
@hachibill rod who?
rod knock through your block!
impleasen 6 months ago
@hachibill ROD who ? ? ? Th rod is sticking in to his ass.....FAIL ! ! !
pinoyeh 6 months ago
@hachibill Rod who?
yarnell21222 4 months ago
@yarnell21222 Rod Connecting
mumppah 4 months ago
why is man so obsessed with engine power?
alexcool57 8 months ago
The rod got tired of riding around on those ugly 'rims', so it left the block!
Fall3n96 8 months ago 3
"WHOOAAA!!" "Better have 4,000 to replace the engine." "WHOOHOO!!!"
TOOLAPC68 8 months ago
SR20 JUNK dont wast your time
pissuoff1 8 months ago
Sounds like a spun bearing then snap!
fdjizm 8 months ago
so it goes from 580hp to 2 manpowers that sucks ^^
250cc4stroke 8 months ago 2
This has been flagged as spam show
And nothing of value was lost...
Raptor232 8 months ago
i can do that in my car and not even spend half the cash they did.
itzbossman 8 months ago 5
@itzbossman lol...
Kenuwine24 8 months ago
@MrOogdaboogda car still looks nice, just doesnt go anywhere
thaandiesel 8 months ago
WOW 117 people dislike his rims thats like going to a swimsuit contest and bitchin about the chicks high heels, They are probably the same people that go to shows and park their cars way down the road so no one bags on them lol
leddenpc 8 months ago
hahahahaahahahahaahhhahaahahaaahaahhhahahaha
Trobbins86 8 months ago
he was pushin over 400kw so give him kudos!
genetik69 9 months ago
nelson would say-----> haaaaaaaaaaaaa haaaaaaaaaaa!!!
commandingshifter407 9 months ago 2
valve floats due to spring.... so rocker arm doesnt make full "hard" contact with rod..... rod slips and flings god knows where....
Logo3801 9 months ago
@Logo3801 do you know wtf your talking about.... didnt think so.
jon570 9 months ago
@jon570 yeah im an aircraft mechanic and i do major overhauls on lycoming and conntinetal engines.... yeah i do know what im saying... why???
Logo3801 8 months ago
@Logo3801 You could use better grammer so people could fucking understand you. Valve float is when the valve doesnt have enough time to close before the piston moves to top dead center and the piston can smack the valve causing your engine to fuck up. valve float wont cause the motor to throw a rod. Bad rod bearins or the motor seizing would cause a rod to break.
jon570 8 months ago
This has been flagged as spam show
check out AUTOMOTIVATED.BLOGSPOT.COM All about cars, tuning and automotive industry
turtyk 9 months ago
@turtyk Stop being a advertisement whore. No one likes them.
JeepYJJunkie 9 months ago
YAY he fucked his engine. I wouldn't be stoked lol
CRX7510 9 months ago
an RB30 would look good ;) time for some change
boredaslad 9 months ago
@boredaslad hahahah yeah and an RB30 would laugh at a measley 580rwhp...Ha!
jgsport 9 months ago
It'll buff out..
NastyBuilt 9 months ago 48
@NastyBuilt and use some duct tape and everything will be fineee
cyaanara 8 months ago
Put some of that z- maxx Shelby sells in it and it will be fine.
imjaybird 9 months ago
0:30 FAIL!
greenbhpk 9 months ago
Look on the bright side, I see a swapportunity. RB anyone? :D
thatguy2042 9 months ago 2
Now this is a spectator sport I can get behind. People showing off their modded car's power and then destroying the engine out of stupidity. I fucking love it.
Patchu101 10 months ago 2
the car took its own life
MrWardy369 10 months ago
that must be embarrassing in front of all of those people but not as embarrassing as those rims on that car though
Raptor250racer 10 months ago
gas axe the fucker !!
plonker00765 10 months ago
530 to Zero in 4 seconds, lolling.
27FreakDS 10 months ago 4
Now it has ZERO HP.
38Squid 10 months ago 3
Should have put a V8 in that and get some real HP.
patattack46 10 months ago
Hey, you got 580 hp and the car can't even move under its own steam any more LOL
thepublandlord1 10 months ago
:'(
Rtree115 10 months ago
Poof! Oil looks like shit Synthetic baby, Synthetic.
kodiak410a 10 months ago
Well Time for the stronger upgraded RB26DET LOL! Great HP for a SR20
MixQuisite 10 months ago
This makes me sad T_T poor sr
tmx51 10 months ago
That'll just buff out, nothing huge.
Silvestris420 10 months ago 2
That was the nastiest compessor surge i ever heard
DjayJohn 10 months ago
someone should have been running fresh oil be4 they decided to dyno
DawgMode 10 months ago
Another one bites the dust
benjenings 10 months ago
I would cry!
legionaire15 10 months ago
What a waist of a cunt....!
hexhis85 10 months ago