@mendoza1017 If its made out of two 13b's its 2.6 liter but with the way rotaries operate its closer to being equivalent to 7.8 liter ( 463.78 cubic inches ) if you count how many combustion chambers are present. Some people don't like to think of it that way though since the e shaft makes 3 complete rotations for every 1 complete on a given rotor and displacement is factored on the combustion chamber volume swept by piston engines in one movement from TDC to BDC. I priced motor only at 10-17k
I DUNNO THE THREE ROTOR 20B SOUNDS PRETTY PSYCHO TOO. I LIKE THE TRIPLE BETTER. CHECK IT OUT. 20B Triple rotor rx7 with a massive turbo...... thumbs up my comment when ur there ;)
@zonda93 ok mister angry,, i dont know what i said to offend u but YOU CAN GO FUCK YOURSELF MOUTHPIECE HAHA. i didnt ask dumb fucks like yourself so dont worry ur little head about it
@UthinkUknowlol3715 Who's angry? Why are you jumping to conclusions and thinking that I'm offended? You call me a dumb fuck and you cant even spell? Idiotic child.
There's something wrong with the sound. I turned my volume up all the way and I can't hear ANYTHING ever since the first time this video played. Guess I'm going to the doctor.
dont get me wrong but 8.22 doesnt seem that fast for a 4 rotor. there is a 2 rotor RX-7 in Puerto Rico that does 6.97. 8.22 is freakin hella fast but i just think that thing has more potential. and yeah i know he couldnt fully get on it all the way.
@LandonGear you can't compare top fuel with doorslammers... the reason its spinning all the way is the shear fact that they cant get power to the ground, not quite dialled in right.
Very true. The 2.6L 4 rotar can get 600+hp but the only problem with rotars are that its mileage isnt exactly great, and it burns threw oil. Wouldnt stop me from getting one though
A 1.3L 13b turbo can easily make 600Hp as well, its a matter of cost. The 4 rotor is not an engine ever mass produced by mazda, infact you litterally have to make the engine on your own.
On another note, Rotary's all burn oil from factory. Its sprayed on the back of the rotors to keep them cool. With my Rx7 I see about 430km (260miles) per 60L tank and about .5L-1L of oil per tank as well.
god damn rotary sound fucking stupid at idle, but put the gas down and its just so full of awsome.... god i could listen to the rips down the 1/4 all day
weld? you mean bolt. Each rotor has a rotor housing and a mid and back plate on either side. the eccentric shaft is 2 13b shafts combined with a custom piece that runs through the center of them...I forget the name of the piece. Pretty simple, just a bit expensive.
thats the weirdest sounding engine i've ever heard...fast car but wow lol
armyrob211 1 week ago
that thing did 60 in .5 of a second
askater101 1 month ago
finishing speed: MACH 0.3....
FuckEmoFags92 2 months ago
No, more like a BMW body on a 4 rotor motor
ahart5530 2 months ago
I came
gagalitenkattnr1 3 months ago
... Holy God.
cedartowndawg 3 months ago
puerto rico 2 rotor 13b 6.85 @ 201
chenchen14b 4 months ago
Sir you got a BMW stuck to the back of your beast...
SCHWEBS7 5 months ago 15
Anyone have an idea of around how much it would cost for one like this, the top speed, and how many cubic inches the displacement for this is?
mendoza1017 5 months ago
@mendoza1017 If its made out of two 13b's its 2.6 liter but with the way rotaries operate its closer to being equivalent to 7.8 liter ( 463.78 cubic inches ) if you count how many combustion chambers are present. Some people don't like to think of it that way though since the e shaft makes 3 complete rotations for every 1 complete on a given rotor and displacement is factored on the combustion chamber volume swept by piston engines in one movement from TDC to BDC. I priced motor only at 10-17k
WZW1982 5 months ago
wait.. your telling me that that engine doesnt have pistons.. it has rotors?
holy SHIT!
UserNameUnavalible17 5 months ago
Wait... 282 mph?! DAYAM!!!
quinnmyster 5 months ago
first tubbed bmw ive ever seen
onlypresto 6 months ago
I DUNNO THE THREE ROTOR 20B SOUNDS PRETTY PSYCHO TOO. I LIKE THE TRIPLE BETTER. CHECK IT OUT. 20B Triple rotor rx7 with a massive turbo...... thumbs up my comment when ur there ;)
UthinkUknowlol3715 6 months ago
@UthinkUknowlol3715 Just for asking to thumb up your comment I'm going to say; No. Fuck off.
zonda93 5 months ago
@zonda93 ok mister angry,, i dont know what i said to offend u but YOU CAN GO FUCK YOURSELF MOUTHPIECE HAHA. i didnt ask dumb fucks like yourself so dont worry ur little head about it
UthinkUknowlol3715 5 months ago
@UthinkUknowlol3715 Who's angry? Why are you jumping to conclusions and thinking that I'm offended? You call me a dumb fuck and you cant even spell? Idiotic child.
zonda93 5 months ago
how the hell can you do a 1/4 mile long burnout and still run an 8
MrMarkpark 7 months ago
stock.
rustyduktape1 7 months ago
po po aint catching you in this :P
TheShaunwalker 8 months ago
the 4 rotor should see 5 seconds or better in the near future! if the 13b and 20b can do 6 seconds then the 4 rotor can do much better!
Tj1056 8 months ago
There's something wrong with the sound. I turned my volume up all the way and I can't hear ANYTHING ever since the first time this video played. Guess I'm going to the doctor.
dnuofntsol 10 months ago
Was that part of the tire literally tear off on the first run?
asambi69 11 months ago
IF I HAD 15 MICROWAVES AND POPPED 2 BAGGS OF POP CORN FOR EACH ONE MICROWAVE. I SHOULD GET THE SAME IDLE SOUND AS A 4ROTOR LOL. YEA FUKING RIGHT
hellapnoy 11 months ago
Looked at this video not for the bmw. Its for the wankel engine´s sake!
TheRealFobican 11 months ago
yous are all baked sayin its the launch control ahahah thats pure rotary
uninc23 1 year ago
doesnt sound quite right
spenceronni7 1 year ago
thats definitely a mid 7's car
nallen100 1 year ago
it has a real tuff time burning out or the driver suck at it like the lawn mower engine in that
pvtkrout 1 year ago
@pvtkrout thats just the launch control
Tj1056 1 year ago
How do you make a BMW better??? Put a Rotary in it!!!! 8 Seconds beotch!
RotorMedic7 1 year ago
Better get some more tire. It looks like nobody prepped the track.
Warblade118 1 year ago
you know a car is powerful when it does a 1/4 mile 8.22 second burn out :)
hewhoeatspie 1 year ago
that doesnt even sound like a real car
it sounds like a rc
scubbipower07 1 year ago
Comment removed
thisisobvious 1 year ago
I want this in my rx8...
ttube987 1 year ago
bruce lee makes this sound when he burps.
allenpinhead 1 year ago
@allenpinhead fail
budzag 1 year ago
no that was a mazda rotory engine?
maxhax2000 1 year ago
hey what the hell is that soccer ball thing by the resolution settings? it just makes a weird sound when you click it.
LandonGear 1 year ago
dont get me wrong but 8.22 doesnt seem that fast for a 4 rotor. there is a 2 rotor RX-7 in Puerto Rico that does 6.97. 8.22 is freakin hella fast but i just think that thing has more potential. and yeah i know he couldnt fully get on it all the way.
LandonGear 1 year ago
@LandonGear did you not realise the whole-track wheelspin?
this will anihilate all when its tuned
FUGGINGMAD 1 year ago
@FUGGINGMAD yeah but why would it be spinning all the way down? top fuel has 8000hp and thay have less spin than that.
LandonGear 1 year ago
@LandonGear you can't compare top fuel with doorslammers... the reason its spinning all the way is the shear fact that they cant get power to the ground, not quite dialled in right.
FUGGINGMAD 1 year ago
@LandonGear top fuel cars spin all the way down but also engine is in the back way more traction
Tj1056 1 year ago
ga shit!!!!!!!!!!
91DAintegraB20 1 year ago
lol that car is like "GET THE FUCK OUTA THE WAY!!!!"
YOURANOOBTRUSTME 1 year ago
8.22 and he was spinning the tires
markification 1 year ago 2
that fucker sure accelerates fast ass shit
JuanPapaNicolao 1 year ago
thats dirty
ivbeenshot 1 year ago
You know its fast when it has a wheelie bar!
JANNOSPR 1 year ago 2
is that engine from like a mazda 787?
Spect8er1 1 year ago
yes
BigBlockRat87 1 year ago
o wow
princessrandi927 2 years ago
if its sound you want wach top fuellers these things are expensize to build and maintain build a a 2jz
germantoyota 2 years ago
thats balls in your chin fast
SirSkidPlank 2 years ago
thats fuckin FAST! Listen to that sound WOW
therealdeal989 2 years ago 2
Would be awesome to have an RX7 with that engine, streetlegal! :D
Willozofen 1 year ago
rotary motors do infact produce way more force per litre than conventional piston driven motors :) btw this is one sick rotory!!!
mick27vic 2 years ago
i think rotory motors produce more torce and horse power per liter than a normal motor with pistions
funfundKafer 2 years ago
@funfundKafer They do produce more hp BUT they have to turn massive rps to do it,
BoltFurr 2 years ago
@funfundKafer
Very true. The 2.6L 4 rotar can get 600+hp but the only problem with rotars are that its mileage isnt exactly great, and it burns threw oil. Wouldnt stop me from getting one though
KillaRock404 2 years ago
A 1.3L 13b turbo can easily make 600Hp as well, its a matter of cost. The 4 rotor is not an engine ever mass produced by mazda, infact you litterally have to make the engine on your own.
On another note, Rotary's all burn oil from factory. Its sprayed on the back of the rotors to keep them cool. With my Rx7 I see about 430km (260miles) per 60L tank and about .5L-1L of oil per tank as well.
BrokenDoorStudios 2 years ago
that just seems like a waste if you ask me ill just stick to my uprights in my 68 beetle
funfundKafer 2 years ago
That's a HUGE intake
WickedGr 2 years ago
Comment removed
WickedGr 2 years ago
he almost lost it in the first take off!! that cars is a fucking beast though. lmao
biggametizo 2 years ago
MONSTER
nonsense0233 2 years ago
Comment removed
hazmat440 2 years ago
crazy how such a tiny motor can be so beastly
randyj69 2 years ago 9
dont forget dude... lol
if it aint a rotor, it aint a motor
rx8allday 2 years ago 2
god damn rotary sound fucking stupid at idle, but put the gas down and its just so full of awsome.... god i could listen to the rips down the 1/4 all day
ja3301 2 years ago
after going in the water, it sound a bit like an f1 car! AMAZING!!!!!!!
DjJsD1995 2 years ago
wow the sound if amazing!
tipo2106 2 years ago
godzilla!!! its allive! damn not bad for 2.6L.....i think its 2.6.......but it revs like no other
99Lezard99 2 years ago
This comment has received too many negative votes show
please tell me it runs higher than 8s..
you can get 8s with the original bmw motor
slimeball6969 2 years ago
this pretty crazzy!
alexi099 2 years ago 4
dam bro , you got a super car there
HondaSuperSport1100 2 years ago 4
sounds like a screaming Dino xDD lol
maxpower700 2 years ago
losing traction with raccing slick all the way and doin quarter mile in 2 gears. can i get two of these plz.
OmerTheGreatOne 2 years ago 36
@OmerTheGreatOne
you do realize that it's probably mated to a powerglide.
thisisobvious 1 year ago
@OmerTheGreatOne I wonder what that even feels like
1skiinIan 7 months ago
best sounding engine ever, PERIOD!
tdatreefrog 2 years ago 29
It the best thing to do to a M3
ferguson921 2 years ago
putting a real engine in it :D
RossDawg8 2 years ago 2
the best sound in the world
kahn4218 2 years ago
omg omg omgom gomgomgogm yea sick
cr4nkshft 2 years ago
i wonder how fast this car can go in a 0-60 run..
metal0n0rockoholic 2 years ago
faster then you can say holy shit ;-)
gregmacknass 2 years ago 3
Great use if the Twin Kidney Grill as intake...
Worthwit 2 years ago
OMFG thats so f*cking sick!!!!!
deadreaver2 2 years ago
at the last run u can hear it loosing traction the whole track ... these are the ultimate V8 eating machine
rotorpowa 2 years ago
THe sound of that engine is unreal...Sounds like a mix between a two stroke and something else....Fucking unreal...I want one of those
scott93257 2 years ago 5
give it some time this thing will hammer
bmxroscoe 2 years ago
thats off its titts!!! no traction wat so ever no wonder it couldnt pull a 6
rotorpowa 3 years ago 2
HOLY SHIT! NICE!
ImpasteNexus 3 years ago
sick
scotterinsam 3 years ago
o ja pierdole ! :-)
fallko76 3 years ago
insane car i love it
Giroux73 3 years ago
you know whats sad....that pr has a 13b and its ET is 6 secs and then here we have a 26b that cant even make it to 7 secs now thats just sad
bridgeportedrotary 3 years ago
indeed
Lypur 3 years ago
queen street smash repairs owns that car they are always at willowbank raceway lol takes some balls to drive tht car
airbornthundercat 3 years ago
KILLLLA !!!!Sick Machine ,even stang wouldn't be able run like that this those pipes :)!!!!!///M POWER!!! That car will eat anything for dinner!!!:)
roman0078 4 years ago
lol
justcallmebad 3 years ago
Did you just type "M Power", as if there was anything BMW about that car? You do realize thats a Mazda motor, in a tube frame chassis... right? Lol.
SlickShoesC6 3 years ago
I know I was 2 drunk when I was Watchin' this vid :)LOL!
roman0078 3 years ago
one of the sickess things i ever saw so fast
rotary3g 4 years ago
insane....isnt he kit to link to rotor engines 6 grand alone?
Jwmbike14 4 years ago
just weld the housings together and have a custom eshaft made
paradoxbox1 4 years ago
weld? you mean bolt. Each rotor has a rotor housing and a mid and back plate on either side. the eccentric shaft is 2 13b shafts combined with a custom piece that runs through the center of them...I forget the name of the piece. Pretty simple, just a bit expensive.
thugathugacation 4 years ago 3
bahaha :)
Weld the housing's lol
drantman 3 years ago