Installing TechT Complete Cyclone Upgrade Kit

[Arcanjotattoo]

that video save my live kkkkkkkkkk

[themetalgod50]

why the 1st pin u have to get aut my is inposible to get it out

[BeNGun86]

why u don´t use the black o-ring which comes with the kit??

[MK3VR616]

Great video man, I am going to do this tonight.

[tcsilverado]

Thanks alot for this vid, I have upgraded my ratchet to metal with the squishy pads and for some reason I couldn't get the cyclone to cycle through shots, the cyclone wouldn't turn when the gun was shot. And until I watched your vid I had no idea on how to fix it, when you said to clip the small spring by one coil so it would cycle faster I tried that and it works like a charm now.

[danny96211]

lol why do ppl say they have trouble getting out the pins? just use a hammer and gently tap them out. if they rly wont come out, they may be broken. my back two pins broke before

[m0n3ymj]

ok so what dose this do

and wil it help with my e gripim going to get on my x7

[mudshovel508]

this thing is only good unless you have a egrip or response trigger right?

[itrytofight]

The pins don't come out as easily as I would like it to (because its brand spankin new for my Alpha Black) but THANK YOU regardless.

: )

[angrymuffin123]

is it really needed to cut the spring?

[angrymuffin123]

holy crap thats a lot of work hahaha. its a great upgrade but i honestly dont have enough patience

[steffel07]

thanks 4 the vid

[meegmah]

Man .... now I gotta go do this again ....forgot to grease a couple spots.

[bballroger11]

do these parts fit the x7 phenom??

[IllSmurf]

Disregard my comment about cutting the bottom of my low profile x7 hopper...just remembered I ordered the techt double stack squishy paddles so they are a bit higher than the original techt squishy paddles. The New Double-Stack Feature allows for more balls to be in the bottom of the Cyclone Feed. By putting more balls in the bottom of the loader it means that fewer shots will be skipped. Def worth buying these double stacked.

[IllSmurf]

Awesome video, was definately helpful. Only thing is those pins are a pain in the rear to take out...I had to use the TECHT Sav Grease to loosen it up and get them out. TALK ABOUT TOUGH! Other than that the kit works wonders. I don't know about any one else...but i had to cut a bit off the bottom of my low profile x7 hopper so that it wouldn't rub or stop the squishy paddles...any 1 else had to do this? (Tippmann A5)

[stetdawg]

GREAT QUALITY

[aliolix02]

having same problem wit the stock pins too..had to dremmel it out since im not using my old ratchet anymore haha

[matycon]

Hey man i am having one hell of a time removing the stock pins that hold in the ratchet.. it doesnt just pop out like yours.. any suggestions?

[styles20001]

I asked him the same question yesterday. I don't know what kind of magic KRA has to get those pins out with that little retainer pin. IMPOSSIBLE!! I watched a similar video last night for the RAP4 kit and that guy used a tool that looked like a screwdriver, but it had a small pinhead at the end. Like something you'd shank a fool with in prison. LOL!!

I'm going to Home Depot immediately after work to get one.

[miguelkid]

I got the whole upgrade kit including the zero kick back hammer for my Project Salvo. Your video was alot of help when i went to do the cyclone changes. Everything was just like how you went about it. Very very helpful. My gun shoots super! Thanks

[rody609]

So i bought an after market hopper upgrade kit from Canada, which was my first mistake, and the seer pins are both to loose on the ratchet can i buy seer pins at my local hardware store or do i have to contact the Canadian based manufacturer for these parts?

Also i got a new power tube casing and installed it but i can hear a faint hiss. Is it leaking and if it is do you have any ideas on how it could be happening?

[alex1995pb]

how much does it improve the cylone is it really noticeable or worth the 100$?

[DeadEyeSprout]

look at it like this, the 2 plastic parts that are there before the vortex mod will wear out and ur gun will stop loading. with just the vortex mod u won't ever have to replace these parts ever again. The whole entire upgrade will make sure nothing will ever be wrong with ur cyclone feeder and it shoots about 2.7x faster than with the original parts. and u can get the whole kit for 50 bucks on ebay XD

[airadam232]

I have an all stock a5 and want to get this, is this the best upgrade to get first?

[KRASHARPSHOOTER]

Read this

krasharpshooter. com / articles / what-should-i-get-first /

[jrcfoxtrot13]

@airadam232 YES cyclones are known to fail so you should upgrade it first.

[NickVanDick]

Thank you a TON for making this video. I was sitting here watching it as i put mine together. I watched it before i bought it and thought it would be simple.

Then i got the parts and had no idea what i was doing. BTW the pins to not come out as easily as you showed.

[KRASHARPSHOOTER]

Mine are worn. :D They get easier with age.

[XxKovenMellishxX]

@NickVanDick I agree. I spent maybe...1 hour trying to get the pins out. i gave up and when i im in the mood again ill try again :P

[fizzledizzle12]

do u need a grease at all? or can it work without it cause i forgot to get it when I bought my upgrade

[KRASHARPSHOOTER]

If you don't mind wearing the metal axle and ratchet together and potentially destroying your upgrades you can use it without grease. Please use grease!

[vexbomer]

it would be a good idea to tear it apart and put some in there not onlly will it let it move easyer but it will reduse the wear and tear on your feeder

[krimsanavenger]

Excellent vid. How many bps could i expect with this complete upgrade? Thanks.

[bantexkaa]

thanks, I am buying full TechT cyclone feed just because of you ;)

[tippymanna5]

when i bought the whole techt kiti forgot to get the lube but i got the oil with the kit, so i was wondering can i use oil instead of the lube.

[KRASHARPSHOOTER]

NO. You need to use a grease for any after market Cyclone Upgrades.

[thepcelite]

im gonna sound dumb but i a newbie paintballer,how do you fit it on the gun lol?

[camvvti]

put it on the gun an mount it

[paintballr27]

do squishy paddles even do any thing? i woulld like to know

[KRASHARPSHOOTER]

Yes, they reduce ball breaks. I have had zero ball breaks in my Cyclone since installing the TechT Paddles.

[paintballr27]

thanks for the help

[hval123]

mine cyclone feed is cinda fucked. i cant manualy feed it the spring allways goers to the side so the thing you feed it with wont go back and the panddels moves 50% before they stop. i think it works with air. i could only fire one shoot cuz i was love on air. help.

[lottoandpippyTV]

Great video!

[stilwell3]

tippmans are to complicated just a thought

[camvvti]

theyre pretty simple....

[MrNico898]

@stilwell3 your a fag just a thought

[stilwell3]

@MrNico898 stfu

[NickBWH]

how much faster will it shoot with this upgrade?

[KRASHARPSHOOTER]

I was hard pressed to get anything above 12bps with my stock cyclone.

TechT claims 30bps with an E-Grip.

I have my R/T + TechT Kit + TUSK trigger set at 14 with no problems. I did have one barrel break in my video test, but the chamber and Cyclone were both clean and shoot through was a breeze while still having adequate accuracy.

[paintballdagger]

Does The TechT Cyclone Upgrade Kit works the same as the Rap4 Cyclone Upgrade Kit?

[KRASHARPSHOOTER]

I used the RAP4 kit before I used the TechT kit, and the RAP4 kit is a piece of junk in comparison. Go for TechT. They make a far superior product!

[AlpineSkierX]

do u have to cut the spring or is that just ur idea u had

[KRASHARPSHOOTER]

It is recommended by TechT that you cut your spring.

[savageZA76]

When you screw together the fortex after upgrade you dont use the washer that was used before, does that make a difference or not?

[KRASHARPSHOOTER]

No need for the washer anymore. Just the new screw that came with the Ratchet is needed.

[JulioCHernandez]

how often do you lube? i got everything tech t, with a lapco ratchet and just used white lithum grese, but i wanna get the tech t gun sav lube

[KRASHARPSHOOTER]

I lube after every game.

[licebuddies]

every game or every day

[KRASHARPSHOOTER]

Every game.

[tacoboy15]

thank you so much for this video!!! i was sitting at my table with all the parts everywhere going wtf. Thank You!!!!!!

[hgresh12]

ok so i got everything for the compelet cyclone feed system but i can get the little pin out of my ratchet and i have presesed really hard and still nothing i have the squishy paddles and the piston housing and i would like to but on the lighting rod and vortex mod but i cant unless i get thoese little pins please help!!

[P8NTBALLING]

How is the lightning rod, any problems?

[KRASHARPSHOOTER]

I have not had any problems with my Complete Cyclone Kit. I am very happy with it. The Lightning Rod works fine for me. I used the RAP4 kit before this, and the rod in that was to long. I was over stroking and miss feeding. Once I installed the TechT kit all my problems went away!

[JulioCHernandez]

ha ha over-stroking nice lol

[armegeddon010]

Thanks alot!! This really helped to show me the proper way to install the awesome upgrades. Otherwise i would've probally screwed up.

[hgresh12]

nice video helped alot and also good for new players i like your videos real nice!!!

[SgtSniper55]

nice video

[bowmasta]

very interesting thans =)