NEW Halo Invert TOO Paintball Loader & Hopper Review/Demo

[sdsuS3]

will any halo shell work for this version of the hopper?

[Mrsnoopy465]

y did i pay 80 dollars for this when i could get it for 60......

[Y0UTUB3PRODVCER]

I have my Invert halo too WITH A RIP DRIVE INSTALLED plus drop test and a review video.

DONT BELIEVE ME?

Go to my channel and select my video.

or adress> watch?v=UBNphJV2Vfo

[coolboyb2005]

why'd you increase the price :3

[KrazyOpsPS3]

are there more colors?

[woodsballpaintballer]

Wut does sound activated mean

[GamingGirl2012]

@woodsballpaintballer when your gun shoots it makes a noise, the hopper has an audio mic for that type of sound so whenever it hears it, it will start loading. the mic sensitivity is just how easily it will hear the sound, the only problem is, is that it could hear a gun next to you by chance and would want to spin 

[woodsballpaintballer]

@GamingGirl2012 Oh thanks i am kinda noew and hav played .about ten games so far but never knew wut that meant

[GamingGirl2012]

@woodsballpaintballer No problem :D i use this hopper for my proto reflex rail and it works perfect

[woodsballpaintballer]

@GamingGirl2012 Hmmmm i might get dangerous power G4 or a Tippmann A5 with a flatline barrel and do u know if the valken v-max loader is any good

[GamingGirl2012]

@woodsballpaintballer the gun is all about what you like best, if you go with a speedball gun you will be more likely to shoot more etc, if you go with a woodsball gun then you have a higher chance at breakage in the gun, now about the hopper... If you just want a hopper that works and still feeds great, get the halo too, the valken is more for looks and "stream line" which i really dont think that does anything cuz if a ball hits the hopper its going to break and feeds like any other heopper

[woodsballpaintballer]

@GamingGirl2012 So with a woodsball gun u have a higher chance of breaking ball inside the gun

[GamingGirl2012]

@woodsballpaintballer yea i have used an a5, x7, carver one, spyder, and some other woodsball one and ive used different type of tanks and not matter what the bolt would eventually break a ball, the more you spend on a gun the better the gun is gonna be to you, anything over $500 is then for looks, speed, and accuracy

[woodsballpaintballer]

@GamingGirl2012 and i have i valken SW-1 and i got a 48 3000 ninja tank if i got a dangerous power G4 would i have to get another tank

[GamingGirl2012]

@woodsballpaintballer it all depends on how much paint you are gonna shoot, with a 48 3000 youll get about 3-4 hoppers maybe, with a 48 4500 you  can get about double depending on how much air the gun uses

[woodsballpaintballer]

@GamingGirl2012 so maybe a 68 4500 guerilla would be my best bet

[GamingGirl2012]

@woodsballpaintballer yea, youll get a lot of pods with that tank and guerilla is a very nice brand

[TheItalianPerson]

whats a rip drive?

[Zititeez]

@TheItalianPerson its an installation so that if you run out of battery in a game you turn the rip drive to feed the balls.

[junits15]

@TheItalianPerson it allows you to manually clear a jam or manually load balls if your battery dies

[chaotic778]

what does it mean that its "sound activated"

[mexcanterrorist]

@chaotic778 theres a mic that detects sound and when it detects sound the rotor spins

[XxAUSTINKOsxX]

should i get this or a pinokio

[axcenter]

@XxAUSTINKOsxX Pinokio, it is better, but still, halo too is a awsome hopper

[jagserdig123]

this or a dxs pulse

[axcenter]

@jagserdig123 Halo too, pulse is to heavy, big, old and so on. And you need a rf chip for it to be fast anyhow, so go by the halo too

[coverman97]

hey i got the loader shield in. i got one but i dont know how to put it on their. Please help

[matthewwwish]

@coverman97 what is the loader shield and what does it do

[coverman97]

@matthewwwish you put it in your hopper and it keeps dirt out of your hopper and it also quiets the sound of your paintballs banging inside the hopper.

[xXEllis1525Xx]

umm what exactly does it mean when its sound activated. Give me datail. Thanks

[xcdis]

i like it, have it on my Invert Mini, very quiet & fast

[patmeserkhani]

can the halo too's internals fit in a halo shell?

[MonsterMadden12]

i have one and its rather good

[Hanning11]

@HuascarT99 do you know if the halo too works good with reballs?

[Hanning11]

@HuascarT99 Well the rotor is more expensive, I dont think you can go wrong with any of the three "super" loaders

[Hanning11]

@HuascarT99 Lol, I dont like that, they all have different pros and cons, your the one not making sense, first off I like the rip drive and all the settings the prophecy have + the none tool disassembly, I like the prophecy more than the rotor or Pinokio, I am playing alot of reball and that is also affecting my choice

[Hanning11]

@HuascarT99 Im acctually buying a prophecy

[adrianojuly]

anus gear is awesome, i love my anus gear

[jonotwist]

@count3rstrikenOOb ur bad @ speeeling

[ddopvpincleric]

cat

[Shallowz987]

got this for my invert mini, wrecks people. I might upgrade to the rotor later tho

[Hanning11]

@Shallowz987 Hey, do I have to take the whole thing apart if I am supposed to change batteries in it? thinking of buying one

[neilgatpandan]

@xIPierceIx why dont you just use a gravity fed? only 3 bucks you dumbass

[Mrpaintballdude28]

does this work on any gun

[SuperCoolstuff101]

@Mrpaintballdude28 no its a bigger feedneck so it only works for those clamps that can get looser

[JoseAcqua]

ANUS GEAR

[kinkysnarf]

Do these break easily? Cuz i slid and now mine doesnt work?

[Y0UTUB3PRODVCER]

I got this and i finished testing on my 09 electra and it keeps up perfectly ^^.

[klpeekl2000]

best hopper ive ever gotten. I love it.

[ReaperBRAD]

@klpeekl2000 what is your hopper set on

[destroyDUCK]

could u put the v35 board in it?

[flightclubla]

the loader is not 60 nomore

[V2killah]

i got this yesterday when i was going paintballing i must say i love this hopper

[6iPWNi9]

I wish there was a small, tight 150 round motorized hopper.

[insaneempire93]

I AM SELLING A HARD CORPS OADMOUTH LOADER 440 W/ A 9 OUNCE CO2 TANK FOR $50 . IT ME UP IF UR INTERESTED

[Imonaboat657]

Hey, I'm deciding weather to get the Invert TOO or the Halo B with Rip Drive and the V35 "Victory" board. Which one should I get? Please include why. Thanks.

[tricec]

ANUS GEAR!!!!!!!

[nikpwned]

What is the best speed feed to get for this or should I just keep the lid? (I play a little bit of hyper ball mostly woods ball and only a very small amount of speedball/Xball)

[Tauruspt2]

@nikpwned well woodsball and hyper ball u really dont need to feed fast. speedball and xball is when u need a speedfeed

[metalcore4lieph]

how loud is this hopper?

[ModMongrels]

@metalcore4lieph The hopper is not loud at all. it only feeds balls when you shoot so you never hear it during play. when not in play you can slap the side to activate it and still its not very loud. i can make a video of how loud it is if you like you just have to ask.

[metalcore4lieph]

@ModMongrels that would be cool if you could make a video. I was thinking of getting either this or the view loader eye force. But this looks like a better hopper

[ModMongrels]

@metalcore4lieph Ok the video is up just go to my page to view it i guess.

[metalcore4lieph]

@ModMongrels nice dude, thanks, im gunna try and get that one.

[GTicecoldkilla77]

what is the difference between a Sound activated and an Eyes loader?

[ATLANTA287]

I got vids on my page, but this hopper's not too bad its reall quiet i get pissed off when im in the middle of a match because i never know if its on. & i dont know how to adjust the settings but it feeds my gun paint ive never broken a ball...............things still to damn quiet.

[TxCardinalFan]

Is this hopper good for an invert mini?

[CmErC94]

@TxCardinalFan get a rotor, if to much money get a empire prohency

[TxCardinalFan]

@CmErC94 but I won't ever shoot fast enough for a rotor or prohency because I play on semi

[DCsk8er90]

The difference is that it's heavier slower maybe less durable and no rip drive and completely differen internal design

[DCsk8er90]

This by far

[BlackDart94]

should i get this or a qloader for my tm7

[highrollizzo]

whats the difference between this and the prophecy cuz if this is cheaper and can still keep up with the prophecy and some higher end guns, im getting this

[wiilikepie]

These are retailing for $70 now, but as a little tip, your local Scheels still has them for $60, I saw it yesterday when I went to go get one and I was like, huh? Better not tell em what they're retailing for now.

[HeyYo101]

dye rotor..

[ChrisDokProductions]

First impression, WORST LOADER I HAD EVER USED. The first time i put paint through it it DEMOLISHED all of the paint, it was pouring into my gun in liquid form...

ever since its been working AMAZING :)

great loader, great price, bad first impression :(

[slipknotmaggot777]

THE FACTORIES SETTING ARE BULLSHIT. the same thing happened to me and then i turned down the speed and it worked great

[jd575]

So shouldnt the poster make a correction to the movie? Add one of those little magic red boxes that appear and state the price has changed? IDK, I just felt dooped when I went to the website and the price was different that what was BLASTED all over the movie.

[jd575]

This movie is BAIT AND SWITCH!!! I am trying to buy one of these and found the price on the VID to be the lowest out there by $10.... until you go to the website. On this website its $69. That is illegal!!! Please fix.....

Other than that... the review is good.

[htebreeder]

it used to be 60, the price went up

[jd575]

I understand the price went up. The person who made the video who is advertising this for sale should fix the price on the movie or in the comments section dont you think???

[CammanderKhan]

would this work on a bt4

[scnokered]

@tktfowl17 hey man thanks for giving me a good tip about the speedfeed for the halotoo ill look more into it thanks

[scnokered]

can someone help me out? i want to know can any speedfeed upgrade work on this loader because its a great price and im thinking of getting it but if i get it i want know if i can put a speedfeed on it? if you can answer me back this would help thanks

[tktfowl7]

@scnokered ...well I'm PRETTY SURE (but not 100% positive) that you can mount a Virtue Crown on it, as well as the cheaper Exalt speedfeed. I think I heard this somewhere in a TechPB video, but please check it out yourself before buying anything.

[TheBoredKorean]

Anything that fits the Halo B, or V35. If it fits them, should fit the Invert Too.

[hockeyeast56]

Invert Too or Empire Magna? Which one is better

[zackrosario]

Invert Halo Too is far more better than Halo B2.Halo B2 is a damn problematic loader.

[Lakesoccer13]

ansgear is a great store to buy from..

[LuLzezRoflcopter]

this for 60bucks or spend the extra 40 and go with prophecy?

[meejacob]

Spend the extra 40. you can do alot more to a prophecy with shells and what not and the prophecy also has a wider mouth and a rip drive.

[zackrosario]

@meejacob well,prophercy is most suitable for semi-pro&pro players...while halo too is most suitable for beginner&semi-pro players...you shud understand what kind of ppl are using tht.the prophercy will be "ashamed" of his master if the player who using it is a damn noob.

[EFFORTLESS7]

hell no

[GrabASpoonEatMyAss]

Can anybody tell me how long the batteries last on the Invert Too?

Obviously this depends on the type of batteries used, but in general how many cases will you get out them?

Thanks for your time.

[mrpballer11]

i have this hopper on my mini and it works great. i have put probly 2 or 3 cases through it and its still runing string. i also have a speed feed on it. i would recomend this to anybody.

[zackrosario]

@mrpballer11 halo too is the most suitable for mini...really really damn good. :)

[sbstrikers]

can you put a halo v board in this

[killertoast123]

is there a reason my invert halo too blinks red after u turn it on not continously green?

[AVA3272]

low battery i think

[scrow619]

@killertoast123 it could be a mode or it is most likely a low bat. but i see you made this comment about 1 month ago so you probably figured it out by now. ;}

[Pr3da1or666]

is this lighter then the halo ?

[mitchellgray5]

$59.95? damn that sucks i got mine for $89

[slyrez]

how much speed should i set it im gona be usining it on a 09 proto slg?

[wdikolnc111]

its ok on weight a bit heavier than other loaders but not too heavy

[fhjj22]

it says 59.95, but on the website it says 69.95 y is that

[PBstar0713]

Price rose since they made this video.

[macsgo2hell]

@fhjj22 the vid was made a pretty long time ago, but since it was selling good, invert decided to raise the price...better get yours before it raises to 80!

[GrantRules174]

its called a sale thts not going on anymore

[sammynac999]

whether you are a budget baller or a pro player the invert too makes sense you will never shoot more than 20 bps and you use less battery with the halo too.

[darkjester875]

would this run off a 9 volt

[AlexanderSimonelli]

i have a big question...please help... - k , would u still need a rip clip (electronic loader) if you bought this...cause this feeds at 20 bps....so...would i still need a rip clip for my bt tm 15

[sammynac999]

yes but you would hav you use the regular clamping feedneck that came with the gun and place this into it.

[rhc99]

would this be compatible with my Tippmann 98 Custom?

[sammynac999]

yes as long as you have a clamping feedneck or one that tightens well yuo can use this.

[rhc99]

ok, thanks

[sammynac999]

well, with your 98 cutom do u use a response trigger or an egrip?

[PBheadshot]

out of the 6 speed settings which 1 should i use when im shooting mygun at 14bps

[sammynac999]

i shoot at 15 with my halo too running at 4, all you need is 3 and it should be fine.

[gfgfpjgfgf]

lol how fast does it feed wit da rip drive

[Pr3da1or666]

rip drive is just for unjamming ..... not speed

[gfgfpjgfgf]

idc bou money but my gun goes up tp 30 bps so what should i get

[gfgfpjgfgf]

wht do u sugest invert too or dye rotor PLZ HELP!!?!?!?!?!

[TheXcalber88]

R u retarded u should get a dye rotor it is da fastest rotor out there at 50 bps. my friend has on and over all it is just cool

[sammynac999]

You will NEVER shoot 50 BPS. Dye Rotor is nice but not everyone has 160$ to spend on a loader so at 20 bps this loader is a steal at 60$

[Rs6rey6]

will this hopper work with smart parts vibe?

[Grimwolf101]

i have a vibe anf my friend just gave me an invert too.

i looks a bit bulky but i preforms like a pro :).

[lilwizz200]

great hopper 4 the price

[TwinsFan419]

i have one and i love it

[PBheadshot]

i know theres six speed settings what number out of the 6 should i use when im shooting my gun at 20 bps?

[sammynac999]

5 or 6 is sufficient but i wouldnt reccomend 6 if to have the monitoring off. it will become a blender with fragile paint.

[slyrez]

what speed should i use it....im using a semin aouto proto slg

[SMAT01S]

Should I get this hopper or the Viewloader Eye Force?

[MonkeyDog500]

this one

[abdulios]

this one!

[SMAT01S]

No worries guys, I found a Dye Rotor for £60.

[Matster2213]

this!

[SuperCrackerPB]

i am ordering this tommorow!!

[ant9teen]

could u put a halo speed feed on it?

[PBheadshot]

yeah

[fritchy90210]

could this fit a regular speedfeed?

[AceKilla2u]

yes

[purecanada]

Could you stick Halo B shells on this?

[mateojack100]

im pretty sure u can

[AceKilla2u]

most likely

it is the invert halo too

(since empire owns oddesy (halo) and they also own invert, it'd make sense that they'd all be compatible

[purecanada]

Thanks

[AceKilla2u]

no problem!

[SpyderPB4Life]

i just got this loader and i took it apart and i dont know how to put the lid on right. i dont know where to put the little spring to make it spring loaded. please help

[zimbawe2552]

get a speedfeed and throw away the lid }; {0

[BRADMAY24]

can you put a Crown Speed Feed on it?

[JerzeBoi973]

can you use the 9v converter kit on this??

[slyrez]

is this a good loader overal is it confusing is it good baterry life?

[AceKilla2u]

is halo from invert? and i knbo invert is from empire, so does that mean halo is also from empire?

[malaysniac]

Halo is from Odyssey.

[AceKilla2u]

ok i was wondering why they kept calling it the halo invert too

[G0DSEND]

Empire owns Oddessy who makes the halo, they also own Invert. Thus they own and control both.

[AceKilla2u]

ok thx for clearing things up

i knew about the whole, invert empire thing

but didnt kno that it also owned oddessy

[zonio555]

and Kee owns them all

[manalo4]

would u be able to use halo/empire shells? since it does have the same screws..

[Flipnoy808]

hmmm im thinking of this loader but it should come in a smoke color so you can see how much paintballs you got in there

[THMDproductions]

ummmm yea

[09Invert]

Would this thing keep up with a mini?

[protestthehero200]

ya i think

chek out the paitnballthechpb video he shoots it with the new alien independence :p

[R1sinGSun]

can you put a virtue speedfeed on it?

[crysis116]

yeah i have one on mine

[CBARRED0]

i you get a 9V conversion kit wil it work on da invert halo too

[princessLisy]

DYE ROTOR Kick Halo B rip drives @ss even with the v35 chip .Dye Rotors will beat anything out there . see for your self type in on youtube DYE ROTOR VS HALO B RIP DRIVE V35 and see for yourself . Dye makes the halo look like its stock compared to the Dye Rotor.. =)

[Crypticboss1]

i would rather get a reloader b too bad they dont make those anymore they were good i got one

[DeptulaRacing]

now because this is a sound activated loader does that mean if you yell in the field it will try to feed a new ball, and would this do anything bad?