This video is great if you have access to all the tools and you have a lift to do the work properly as you are doing it in this video, buy I mean if this is a TRD mod, why can toyota offer such a pckage as an option, like it does for a GPS, sun roof..I am sure many would take the option if it was done straight at the factory and not at a dealership!...I am sure it's been asked but i am just curious as to why not.
Dealerships have a set amount of hours for each task that's already calculated. If you read the comments from this video or part one, you'll find some comments on it.
HI quick question. With the NEW TRD supercharger installed how much Horse Power and TORQUE can u get right off the bat? meaning with out any further computer tuning. I hope you get this question with out confusion. Thanks, Great VIDEO by the way!
You HAVE to flash the computer with the factory tuning or it won't run properly and engine damage will most likely occur. Oh and that's 515hp and 550 torque. Thanks!
Question when it comes to the fuel system....you say it replaces the original pump, but all pressure remains the same. Why can't you use the pump that comes on the truck?
Is it the same process to install the system on the Tacoma?
How many PSI's does the TRD supercharger kit produce?
Question when it comes to the fuel system....you say it replaces the original pump, but all pressure remains the same. Why can't you use the pump that comes on the truck?
WOW! This Guy is Super Professional and kinda kool @ the same tyme. If I'm able to get this mod, he will be the one to install it. What dealship is he located at?
That's not correct. If you have a Tundra with an oil cooler, then the instructions are slightly different. But you will still use your oil cooler. Our Tundra didn't have an oil cooler, so we didn't need the oil cooler lines included with the kit. If you have an aftermarket oil cooler, you will have to rearrange the lines to fit around the air-to-water intercooler.
Not at this time. The engine placement in relation to the hood is not possible with the supercharger kit that works for the Tundra and Sequoia. Although there are some vehicle's overseas that have reportedly done it....
I really love this video. I really would love to install a supercharger on a '99 Ford Ranger 3.0 liter V6. I am a student in an automotive school, I hope that I can get to learn how to do these more exciting and more complicated procedures. Great vid. Do they sell superchargers for 3.0 '99 Ford Ranger's? Also would I need to rebuild the engine to prepare it for this procedure if I were to do it?
Apparently whipple made one for the '99 3.0, but stopped. So you will need to get one second hand. Rebuilding the engine is not necessary, but would definitely give you a more stable platform to start with. Why not put a v8 in that ranger?
@FloridaSPL That is a good idea, I have really been thinking a lot about putting like a 289 or a 302 in that truck but right now this truck is my daily driver but I will definatly consider doing that. If I need to do that I would need to change the ECU out and the harnesses right?
i have the 5.7L v8 tundra and i want to supercharge it but idk how much its gonna cost me, after all the parts that i need for it how much do you think its gonna cost me?
More horsepower in an engine is to increase the volume air and fuel it consumes. The supercharger forces more air into the engine to accomplish this goal. So now you need more fuel to balance the equation. The new fuel pump operates at the same pressure, but supplies more volume of fuel per second. The computer then compensates for a variety of factors by changing the timing and dwell of the injectors when necessary to supply the correct amount of fuel for efficient combustion
I love this video. Helped me and a friend install the TRD Supercharger on his new Tundra without a hitch. Definately going to subscribe to FloridaSPL! Your attention to detail was fantastic, we're both idiots at mechanical work, but with this we felt like professionals; which is kinda scary.
Buzz, dont get me wrong this vid was very helpful for my install. I know the manual says you need to remove the bumper cover and drain the fluid out of the block but for any DIYs out there I can assure you the draining the fluid out of the rad is all that is needed and the LTR, pump, hoses and wiring can EASILY be installed without removing the bumper cover, retainer & rad support bracket. This saved me a bunch of time on the install and didnt compromise install quality.
Hey FloridaSPL i have a V6 Toyota hilux (SR5) 2009 model. I am Australian and just curious if there is a supercharger available for this engine. Thanks mate
Nice "how to" and very nice attention to detail in the way you do maintenance. I would actually trust you to do work on my truck (and I trust very few people)
if you think that a factory kit where everything goes into place perfectly is too much work, don't attempt to piece a forced induction kit on your own. That's about five times as much work!
Danm I wonder how much more fuel is consumed by bolting on the SC. I know that fuel effficency and truck should never be used on the same sentence, but i can only imagine the dollars adding up by the fuel used.
Awesome video! I thought I was watching Power Block for a minute...
I still don't have the balls to do this in my garage, but seeing how well the kit is built makes me feel a little more comfortable about buying it. Are most toyota mechanics well qualified to do this type of work?
The beefier pump keeps the pressure where it needs to be, whereas the stock pump would possibly be overtaxed under hard acceleration; larger injectors = higher flow rate, stronger pump = prevents starving the engine
i have the skills/and tools to do my self thats why i asked about the tune. also are there any smaller pullys or any other stand alone tunner (handhelds) out there. thanks again.
The dealership usually charges 9hr's of labor and each has different rates. You can do the install at home, and then have the truck towed to the dealership for the computer flash. You'd have to call your local dealership for rates.
The pulley that comes on the S/C is pretty small. We're not sure what else it out there, the S/C seems to do just fine as it is.
well close enough..lol..man i missed seeing him i dont really watch that anymore. i didnt care for that other guy, i guess he was supposed to be the funny one.
To make more horsepower in an engine is to increase the volume air and fuel it consumes. The supercharger forces more air into the engine to accomplish this goal. So now you need more fuel to balance the equation. The new fuel pump operates at the same pressure, but supplies more volume of fuel per second. The computer then compensates for a variety of factors by changing the timing and dwell of the injectors when necessary to supply the correct amount of fuel for efficient combustion.
I want dude working on my truck!
jggm2011 3 months ago
This video is great if you have access to all the tools and you have a lift to do the work properly as you are doing it in this video, buy I mean if this is a TRD mod, why can toyota offer such a pckage as an option, like it does for a GPS, sun roof..I am sure many would take the option if it was done straight at the factory and not at a dealership!...I am sure it's been asked but i am just curious as to why not.
MTLBOBIRAS 4 months ago
is there anykind of timing you need to do with the charger?
pimprock23 5 months ago
@pimprock23
No. Just bolt in on and GO!
FloridaSPL 5 months ago
What does your dealership typically charge for installation? either by hours or by $?
Thank you
evilet1111 6 months ago
@evilet1111
Dealerships have a set amount of hours for each task that's already calculated. If you read the comments from this video or part one, you'll find some comments on it.
FloridaSPL 6 months ago
HI quick question. With the NEW TRD supercharger installed how much Horse Power and TORQUE can u get right off the bat? meaning with out any further computer tuning. I hope you get this question with out confusion. Thanks, Great VIDEO by the way!
jeffraymma2 6 months ago
@jeffraymma2
You HAVE to flash the computer with the factory tuning or it won't run properly and engine damage will most likely occur. Oh and that's 515hp and 550 torque. Thanks!
FloridaSPL 6 months ago
Man you Guys are Pros! Good Job, come work on my mazda LOL
chrisbmilton 8 months ago
Ok sweet. Are the stats and installation of the supercharger for the Tundra the same as the Tacoma?
ducati848e 9 months ago
@ducati848e
The concept is the same. The procedure is completely different.
FloridaSPL 9 months ago
Question when it comes to the fuel system....you say it replaces the original pump, but all pressure remains the same. Why can't you use the pump that comes on the truck?
Is it the same process to install the system on the Tacoma?
How many PSI's does the TRD supercharger kit produce?
ducati848e 9 months ago
Question when it comes to the fuel system....you say it replaces the original pump, but all pressure remains the same. Why can't you use the pump that comes on the truck?
ducati848e 9 months ago
@ducati848e
The original pump doesn't provide enough volume of fuel. The charger produces 8 lbs of boost
FloridaSPL 9 months ago
Dear Sir, how many hours/minutes did it take you to completely install it?
Thanks
DrAlShammari89 9 months ago
@DrAlShammari89
10 hours the first time.
FloridaSPL 9 months ago
WOW! This Guy is Super Professional and kinda kool @ the same tyme. If I'm able to get this mod, he will be the one to install it. What dealship is he located at?
xXSLYXxx 10 months ago
@xXSLYXxx
He's no longer at a dealership. He has his own garage however.
FloridaSPL 10 months ago
So I cant use my oil cooler anymore?
dragstar7039 1 year ago
@dragstar7039
That's not correct. If you have a Tundra with an oil cooler, then the instructions are slightly different. But you will still use your oil cooler. Our Tundra didn't have an oil cooler, so we didn't need the oil cooler lines included with the kit. If you have an aftermarket oil cooler, you will have to rearrange the lines to fit around the air-to-water intercooler.
FloridaSPL 1 year ago
DAM THIS GUYS IS SHORT
maldo72 1 year ago
will this fit a 5.7L land cruiser?
omarspence 1 year ago
@omarspence
Not at this time. The engine placement in relation to the hood is not possible with the supercharger kit that works for the Tundra and Sequoia. Although there are some vehicle's overseas that have reportedly done it....
FloridaSPL 1 year ago
how much do you think someone would charge to install a supercharger on a ford explorer sport trac 2001? OR can you make a video of the installation?
camargo2012 1 year ago
Apply oil to the injector O-ring so the rubber does not become damage and slip right into the injector hole.
SteveXnycperformance 1 year ago
Geez. It seems like over 90% of this job is taking shit apart lol
TonyMalone13 1 year ago
@TonyMalone13
But the other 10% is driving past Corvettes!
FloridaSPL 1 year ago 10
@FloridaSPL you wish
drdoom554 1 year ago
@drdoom554
Faster than a C5 and will spook a C6 :)
FloridaSPL 1 year ago 3
@FloridaSPL I am able to do all of this at home but how do I flash my ECU is there special software ?
Excellent video
TupacTheRealest1 5 months ago
@TupacTheRealest1
You'll have to have your truck towed to the dealership or you can send your ECU to a third party. It's not something you can do yourself.
FloridaSPL 5 months ago
Professional until that last bit in the end haha
skateozzy 1 year ago
I really love this video. I really would love to install a supercharger on a '99 Ford Ranger 3.0 liter V6. I am a student in an automotive school, I hope that I can get to learn how to do these more exciting and more complicated procedures. Great vid. Do they sell superchargers for 3.0 '99 Ford Ranger's? Also would I need to rebuild the engine to prepare it for this procedure if I were to do it?
earlybird38 1 year ago
@earlybird38
Apparently whipple made one for the '99 3.0, but stopped. So you will need to get one second hand. Rebuilding the engine is not necessary, but would definitely give you a more stable platform to start with. Why not put a v8 in that ranger?
FloridaSPL 1 year ago
@FloridaSPL That is a good idea, I have really been thinking a lot about putting like a 289 or a 302 in that truck but right now this truck is my daily driver but I will definatly consider doing that. If I need to do that I would need to change the ECU out and the harnesses right?
earlybird38 1 year ago
@earlybird38
Right. Google it. There's tons of info on how-to. Good luck!
FloridaSPL 1 year ago
@earlybird38 What school do you go to because im interested in automotive things also
malex102 1 year ago
@malex102 I go to northshore technical college in Louisiana
earlybird38 1 year ago
How do I get hired? I can do this no sweat.
SupaDupaStatus 1 year ago
i have the 5.7L v8 tundra and i want to supercharge it but idk how much its gonna cost me, after all the parts that i need for it how much do you think its gonna cost me?
FrankieDills91 1 year ago
@FrankieDills91
With 'retail' prices and labor you should spend around $8k. If you have more than one dealer near you, shop around.
FloridaSPL 1 year ago
you are really helpfull. is it posible for you to install a turbo or a supercharger on a 01 v6 mustang
DIENAMICProductions 1 year ago
@DIENAMICProductions
There are several kits available for V6 mustangs. If you bring the car to us in Florida and the kit we can install it for you.
FloridaSPL 1 year ago
thnxxxx maan
can u show us how to install turbo ?
i have ford mondeo 2008
and u r really gd teacher
u teach me new things about how to install the supercharger
thnx aloot again
sudan55 1 year ago
@sudan55
Sorry. I can't show you that. But thanks for the compliment.
FloridaSPL 1 year ago
is this the trd supercharger Dyno?
manning55 1 year ago
@manning55
What do you mean?
FloridaSPL 1 year ago
@manning55 idk in other videos it say something with Dyno so i ws wondering what that was. And would this work on tacoma?
manning55 1 year ago
@manning55
A Dyno is a test for the car that calculates the power a car is pushing to the wheel.
Any car and every car can do it. As long as you have the right dyno test.
A Dyno test is a stationary test meaning the cars wheels move wheels.
Extofy 1 year ago
man i haven't seen this guy sens truck u, on speed tv, i remember him ,he knows his stuff, about trucks!
rickslick730 1 year ago
i think ill just pay to have it installed lol
blindrawing 1 year ago
omg i love cars so much but i wish i knew as much from them as you!
Devilplayer55 1 year ago
I've been on pause for 3 months. I think i need help.
DAKMAIN 1 year ago
damn tats hella work... better off juss let the factory do it for u haha
shoreWaves4 1 year ago
If fuel pressure remains unchanged from the original spec, then what is the point of changing the pump ?
Maximusfool 1 year ago
@Maximusfool
More horsepower in an engine is to increase the volume air and fuel it consumes. The supercharger forces more air into the engine to accomplish this goal. So now you need more fuel to balance the equation. The new fuel pump operates at the same pressure, but supplies more volume of fuel per second. The computer then compensates for a variety of factors by changing the timing and dwell of the injectors when necessary to supply the correct amount of fuel for efficient combustion
FloridaSPL 1 year ago
nice burnout at the end
avpdud3 1 year ago
@avpdud3
Thanks!!
FloridaSPL 1 year ago
why would the fuel pump be swapped out if there is no pressure change?
soldier4God01 1 year ago
@soldier4God01
See response.
FloridaSPL 1 year ago
Good mechanic!
Humanslocation5for1 1 year ago
Excellent Video, very professional!!
saintgabe21 1 year ago
wow so complicated.. it seems easier to buy a car and put in a turbo lol
dwnrety1 1 year ago
One of the best instructional videos ive seen!
SweetPhantasee 1 year ago
I love this video. Helped me and a friend install the TRD Supercharger on his new Tundra without a hitch. Definately going to subscribe to FloridaSPL! Your attention to detail was fantastic, we're both idiots at mechanical work, but with this we felt like professionals; which is kinda scary.
spykeestel 1 year ago
Say I wanted you to do the install of my SC, what dealership do I bring my truck to?
MikeCheat04 1 year ago
why do u need to invert the radiator hose?
tiprodoc 1 year ago
Buzz, dont get me wrong this vid was very helpful for my install. I know the manual says you need to remove the bumper cover and drain the fluid out of the block but for any DIYs out there I can assure you the draining the fluid out of the rad is all that is needed and the LTR, pump, hoses and wiring can EASILY be installed without removing the bumper cover, retainer & rad support bracket. This saved me a bunch of time on the install and didnt compromise install quality.
Thanks again
~JH
JHotnuts 1 year ago
i want a trd supercharger on my 2000 4runner!!!!!
Demon1987 1 year ago
ooooooooh
what a complicated kit !!!!
I love Chevy, because your children can fix it in the garage
nescafe4all 1 year ago
Very good very instructional appreciated greatly
soulreaver019 1 year ago
excellent video sir! the person in the video is very illustrative and was helpful...hats off!
moody231 1 year ago
chuck liddell!!!
fuckiraq12 1 year ago
omg he speaks a lot !!!!!!!
pakkiaman2 1 year ago
Excellent instructional video, very professional and well explained
mossimopooky 1 year ago 22
Thanks!
FloridaSPL 1 year ago
Hey FloridaSPL i have a V6 Toyota hilux (SR5) 2009 model. I am Australian and just curious if there is a supercharger available for this engine. Thanks mate
ilove22222 2 years ago
look up trd or toyota racing developments website. they have all their products on their.
Theogrn 2 years ago
BAD ASS TRUCK
Best instruction video ever,
does this kit fits 5.7 Lexus LX570 it does have the same exact engine?
any suggestions
Cold11Fire 2 years ago
No. This particular kit is for the Tundra only. There is a kit for the Sequoia, but not for the Lexus at this time.
FloridaSPL 2 years ago
@Cold11Fire Never head of it. Lexus LX 470.
honda12345678 1 year ago
cool video! thanks for taking the time to make it.
Thermactor 2 years ago
Nice "how to" and very nice attention to detail in the way you do maintenance. I would actually trust you to do work on my truck (and I trust very few people)
crazy4honda 2 years ago
Thanks for the confidence!
FloridaSPL 2 years ago
How much does it cost to just have toyota do all this?
meandmyevo 2 years ago
Your local dealer will charge somewhere in the range of 9 hours labor. Their rates differ though. Give them a call.
FloridaSPL 2 years ago
wow this is way too much work...
fakenphoney 2 years ago 8
if you think that a factory kit where everything goes into place perfectly is too much work, don't attempt to piece a forced induction kit on your own. That's about five times as much work!
Thermactor 2 years ago
@fakenphoney There's no way too much work for mechanics lol
diegotutiven 1 year ago
what's the name of that tool @ 6:26?
BrokeImmunitysince88 2 years ago
Those are a set of slip-joint pliers.
FloridaSPL 2 years ago
Massive slip joint pliers
meandmyevo 2 years ago
its a very large pair of channel locks
chaosad09 2 years ago
very well explained
alan14789 2 years ago
Good Stuff, Buzz & Co. Thanks!
americasfirstfreedom 2 years ago
top vid
RAJSTA81 2 years ago
A very well explained process. You have a lot of mechanical knowledge. I wonder how that affects the gas mileage by adding SC.
AsphaltCowboy57 2 years ago
Danm I wonder how much more fuel is consumed by bolting on the SC. I know that fuel effficency and truck should never be used on the same sentence, but i can only imagine the dollars adding up by the fuel used.
rc0177593 2 years ago
Lov the Vid, If only you can make one on how to install one on my 79 Capri
Mijaycapri79 2 years ago
This has been flagged as spam show
This is a Great video! The speed in witch the information flows is awesome! I look forward to watching more of your videos! Best of luck!
Reverendwyotech 2 years ago
This is a Great video! The speed in witch the information flows is awesome! I look forward to watching more of your videos! Best of luck!
Reverendwyotech 2 years ago
Awesome video! I thought I was watching Power Block for a minute...
I still don't have the balls to do this in my garage, but seeing how well the kit is built makes me feel a little more comfortable about buying it. Are most toyota mechanics well qualified to do this type of work?
vtdeezl 2 years ago
Yes. Your dealership has a qualified technician.
FloridaSPL 2 years ago
i have two quistions is it basicly the same to installe the trd in a 72 chevelle, and how much more hp dose it give?
blue3378 2 years ago
This kit will not fit a stock 72 Chevelle. We recorded a 120 HP increase.
FloridaSPL 2 years ago
i know the trd will not go into a 72 chevelle i mean about a normal superchager, and how much would a good supercharger coast
blue3378 2 years ago
why does the fuel pump need changing if the fuel pressure remains unchanged?
james86d 2 years ago
The beefier pump keeps the pressure where it needs to be, whereas the stock pump would possibly be overtaxed under hard acceleration; larger injectors = higher flow rate, stronger pump = prevents starving the engine
robothitcher 2 years ago
lol, pressure and rate-of-flow are two totally different things
robothitcher 2 years ago
man i wanna learn about this...it looks comlicated tho
welterweight13 2 years ago
Can you make a video of this truck from 0-60 or 0-115
JOVANI7919 2 years ago
We've got something like that on the way. Stay tuned :)
FloridaSPL 2 years ago
wow you look damn small standing in front of that truck
777Guitarrist 2 years ago
Wow, what a great video. Is the installation of a Vortech supercharger similar?
mikeylee2001 2 years ago
Can this supercharger be put on a 5.7L Seqoiua?
mastero21 2 years ago
Yes. It requires a different install kit than the Tundra. Ask at your dealer.
FloridaSPL 2 years ago
wow...wat about installing a twin turbo from supra 2 5.7 tundra..is it a posible?
charlemagne1978 2 years ago
hey any chance they make these for the toyota hilux 4.0v6 and any prices {australia}
cheers thanks for your help
steven16402 3 years ago
does this supercharger kit work with the lexus LX570?
hmfy 3 years ago
No...
FloridaSPL 3 years ago
ok.. do u know if there is a supercharger kit for the LX570?
hmfy 3 years ago
Awesome explaination/presentation.
(Hope you took good notes Ford/GM.)
crazydineh 3 years ago
does it come with the tunner or can you install the tune your self via pc or what?
rangerbrown 3 years ago
As stated in the video, the dealership flashes the computer. There are no other methods of making adjustments outside of the dealership flash.
FloridaSPL 3 years ago
what does the full install run,
i just got a 08 with the tow setup.
i have the skills/and tools to do my self thats why i asked about the tune. also are there any smaller pullys or any other stand alone tunner (handhelds) out there. thanks again.
rangerbrown 3 years ago
The dealership usually charges 9hr's of labor and each has different rates. You can do the install at home, and then have the truck towed to the dealership for the computer flash. You'd have to call your local dealership for rates.
The pulley that comes on the S/C is pretty small. We're not sure what else it out there, the S/C seems to do just fine as it is.
FloridaSPL 3 years ago
toyota fuck every other brand ass...
mastgmc 3 years ago
Wow this guy is so competent and efficient it's almost too much!
d5800877351 3 years ago 3
well close enough..lol..man i missed seeing him i dont really watch that anymore. i didnt care for that other guy, i guess he was supposed to be the funny one.
V8POWER01 3 years ago
hey that guy used to be on the show on spike "TRUCK".
V8POWER01 3 years ago
Buzz was on the Speed Channel show "Truck Universe"
FloridaSPL 3 years ago
why do you change the fuel pump if preasure remains the same
bowzerdoo77 3 years ago
To make more horsepower in an engine is to increase the volume air and fuel it consumes. The supercharger forces more air into the engine to accomplish this goal. So now you need more fuel to balance the equation. The new fuel pump operates at the same pressure, but supplies more volume of fuel per second. The computer then compensates for a variety of factors by changing the timing and dwell of the injectors when necessary to supply the correct amount of fuel for efficient combustion.
FloridaSPL 3 years ago
nice vids but this doesnt help me i want to put a supercharger on a 95 ford escortwagon
thanks tho
gypsysyrbiake 3 years ago
wwaahhooo go buzz lol i like watching this guy work lol ah who neeeds spike tv anyway huh lol
DRthunder3000 3 years ago