How to remove and install grips without an air compressor or tools!

[xLilxBamxBamx]

does anyone know how to remove metal end caps on a scooter

[Theninjadeathhawk]

scooter cunt

[abcpaulobrien]

I feel abused now.

[swescoots]

ur frekin stupid man

[JACF7427]

what the fuck did i just watch

[fuckyeahdoaflair]

slaping the bitch? lol.

[hellyeahracing1]

This is fkn stupid! Jst use a air compresser with an air gun !

[swo00p]

That did not look easy. If I had to do that to my motorbike, it would've been knocked over for sure. I think if you are to removing it to replace it with something much cooler than the original rubber grip, quickest tip I've seen is to cut it. How many people pay $100+ for a new hand grip and then decide to put the old one back on? Anyway, this video is worth the effort. Thanks for the post.

[LucasHansson]

The awkward moment when it doesen't work

[theonlywayisalfie]

why the hell are you useing a fish eye cam for a how to NOT COOL DUDE

[PwNtus1997]

1:22 ooh come on harder!

[xXxJ3ioxXx]

Fucken dumbass was a pain in the ass and you fast forward it

[Jack89944]

if u can roll it back u can just rol it back to the end like mgp squids

[TypicleScooterKid]

0:00 - 1:19 = gay handjob

[Logz1407]

haha CMU when he puts them on

[Jon95McC]

xD this is a joke right?

[black9th52]

HE COULD JUST ROLL THEM OFF THEN USE HAIRSPRAY TO PUT THEM BACK ON

[HOUSEYOURMOMS]

jack off much

[JEOJAKE1]

Why change the bars lucky pry bars are better

[BMXERJOEY100]

you have it in x2 speed it probably took you like 5mins

[Jojobeni1]

So , when i put it on i'm worried that my grips won't stick if theres water under them, what i mean is that like does water dry if it's between rubber and metal and very tight?

[AsEasyAsItCanBe]

@Jojobeni1 Dont use water use hairspray or some rubbing alcohol or that hand sanitizer stuff

[Jojobeni1]

@AsEasyAsItCanBe doesn't he put water?

[AsEasyAsItCanBe]

@Jojobeni1 Yeah but iv found if i use water they take ages to come of and when putting them on i get throttle for ages

[gukeandlarin]

or u ould get a knife slid it under the grips dont cut it lift the knife up put washing up liquid in the gap then they slide right off then wash out and you can use it again

[0radank]

goo-gone/ goof-off shit like that will slide em clean off and on and will dry and lock within 15 minutes or soo the longer you wait the better it cleans grips too and gives you more grip..

[scuby78]

how long did that actually take you

[byroneo5]

that didnt rlly help

[XxZiYoSxX]

Yeah, really easy.

[iI2apeZ]

hilarius

[xFRAGxMOVIESx]

1 word - use washing up liquid its a lube not fukin water

[TheHello1140]

lmfao i was rolling threw this whole thing

[JakeCherek]

u breath hard



[live4hardstyle1]

lmao FAIL!!!!

[hammers692]

yeah but what sucks about water is its not a lubricant.. so it takes forever to dry, even days if you don't use very little of it when you're putting grips on

[keeko2K]

HAHAHAHA!!!! this looks sooo fucking gay!!!

[jesse51496]

you know what also works for putting on grips? if you place your dick inside of them and blow one off, then they become easy to put on.

[IntenseiPodTUTS]

instead of wacking off your scooter you couldve said put water on it and pull ... this will take a few hours but they will be off.

[iscott720]

hold 4 5 8 9

[CrowdShaine]

Pfloommpp !

[martinbaderko97]

why use water, should use wd40 to take them off, and hair spray to put them on so u have no throttle grip

[samisrandom09]

Hold 3 for secret handjob 

[maddboy17]

hold 9 ..........stop jerkin off your bars!!!!

[MrLYNDON56]

screw driver and hairspray works best

[bishopaz]

hey!!! it worked. thanks.

[mexicancheezburger1]

You Make it look easy pal haha

[MrShawnald22]

WD-40 ya idiot. then just wipe the inside of the grips and the bars so that you dont have to wait for em to dry after u slip them back on. note: dont use anything to put them back on because the bars will still have a tiny bit of the grease on them.

[cooldude344100]

Do you have to leave them dry or no? :b

[TheMCbmxTeam]

i use fairy washing liquid lol

[XXchillioXX]

holy shit...just keep pressing the 9

[Propig2000]

how many days will this take me?

[DRsocksumph]

screwdriver under the grips you want to take off, spray windown cleaner in the gap made bythe driver, each side then grip like your accelerating a motorcycle. and done. do the same to put new grips on.

[BroDStepney]

...why didnt you just roll it off? like you did to put the water on

[glitchers4games]

WD40 u stupid retard

[xCunni]

hahaahh what a wanker

[skyeblade]

1:24 looks sooo wrong :DD

[ICompleatedTheMoon]

press 4

[pistach225]

So it's like giving your scooter a handjob?

[poemees]

@pistach225 hahaha so funny -.-

[mega1metalhead]

@pistach225 scooters like oh yeah thats right lol



[black9th52]

@pistach225 OMG YES

[HefftyTV]

@pistach225 pretty fucking sore one if you ask me hahaha

[reidairsofter]

just cut it off



[ThefEzZMonstEr]

nice to see how easy it is.

[AlienKingProductions]

Hehe haha he lubed up the handlebars!!XD

[sethoz22]

u could just cut off the old grips and just yank on the new ones..

[djskittleR9]

it looks like ur jerkin off ur scooter

[sircoggins]

gayboys



[MrFerraraFilms]

tap 9

[BmxModified]

Get a bike pussy.

[stonefly514]

weel that failed

[assjeff]

scooter are gay. (end of discussion)

[JordyClarky7]

it wouldnt surprise me if your voice was actually like that

[james80196]

fucking republican

[gcheek106]

put zipties in and pull its easier

[InfamousKiidz]

Notice how long it took you.

[alphaman1101]

some poor sap has got to be thinking bad about this video

[dancer2728]

just use WD40...



[duffman123bmx]

@dancer2728 wd40 messed up my grips

[sTReeTKr3w]

hahahah



[beaversqueser69]

woooooow that only took like what 20 min to take them off

[shakeydwarf]

HAHAHAHAHAHAHAAHHAA

[westeed1]

bet your mom thought you were spanking it in your room while you were doing that...

[kbawesome101]

0:41 Thats what she did

[akr4m]

u can also use anal lube :)

[razorscoot333]

To take off my grips I just rolled then off

[rowntreesmith]

Use wd40 or or another lube

[cj2000130]

keep on pressing 2 and he is fingering the bottle and 9

[ryankovacs100]

lock on grips !!

[OMGGage]

Wow, Your good at that.

[squwann]

He did that fast lmfao

[ODYSSEYhazard44]

this way is hard to do and not efficient

[lolROmania1]

LOL THATS SO FUNNY

[cwa345]

U sellin those rad cros?

[V8Dino]

use hair spray because it sticks really well and is really slippery to push on

[mikeurgreg]

Hi I have a razor pro so how do I do it because it has that black thing that's attached to it.. So pls send me msg back.  aSAP

[motomarkee1]

@mikeurgreg take you bars out of the little hole they go into cut the string if the black things fall off put your bars back in the t tube if not just put the grips on the other side of the bars and then put them back in the t tube

[mikeurgreg]

@motomarkee1 Thanks

[rideskisallday]

grips are removable without anything at all but your hands.

[hosfordbrandon]

for my hand grips, they came with these wierd black mushroom looking things with a big screw going through the middle and out the end about half a cm. What do i do with them??

[motomarkee1]

@hosfordbrandoni think y`our talkin about bar ends... the go in the hole of your bars so you dont cut yourself stick it in the hole and tighten the bolt

[hosfordbrandon]

@motomarkee1 Thank you soooo much! That helped alot

[motomarkee1]

@hosfordbrandon no prob

[farmer1ab]

Got tired just watching the video.

[smellyoj]

cool ill try dat

[sunnyGsss]

lol

[jason3634]

im interested on the crows

[xFRAGxMOVIESx]

Screw Driver + Washing Up Liquid + Slide under Grips = Slide Easy.

[KristianVas]

use some liquid with alkohol inside

[matto809]

I don't want to start an argument but...that's crap

[BrackScooters]

Or you can put a small screwdriver in between the bars and grips causing a small gap... then pore some water into the gap and wahlah! your grips are off!!!

[motomarkee1]

@BrackScooters yea hah idk i had alot of trouble with this grip the first one slid right off

[motomarkee1]

@BrackScooters and also i said without tools :)

[BrackScooters]

@motomarkee1 but it does take alot less time! only like 30 seconds per grip!!!!

[motomarkee1]

@WAXSD took me like 2 mins but i had troublw with that one for some reason the other one came off in like 5 seconds

[motomarkee1]

@ltenje1411 of my friend but im sellin them right now if your interested

[motomarkee1]

@TannerMrSmith hah what at the end?

[motomarkee1]

ahah homo

[mcnutty93]

dayum mark torque them thangs ;)