Hi speed 1200w Electric Scooter

[mw37251]

now stick ur finger in it lol

[fivefingerbp98]

now stick ur finger in the chain. lmfao

[XxDrewciferxX]

Shits weak....

[Bestundesun]

How much is the motor. What was the motor primarily used for ??

[fitnesus]

Nice Video That You Share , So Very Nice Thanks You Electric Scooter

[lupabuatchannel]

I Really Like The Video From Your All electric parts bought from an RC Store.

[cenedywong]

Your Video Is Very Useful Sharing Hi speed 1200w Electric Scooter

[1borisole]

looks like someone used his knex-box

[teomeimf]

So lets see you ride it

[iulian207]

@teomeimf watch my other video with title " 1200W Electric scooter 20Km/h" and you will see the outside test with me on it.

[BMXSCOOTERKID1441]

[son] WHERE THE HELL IS MY SCOOTER

[dad] ive got it son

[son] WHAT THE HELL you bastard lol

[cpu64]

That chain be all Dubstep'n. It goes Wub wub wub, whawhawhawha wuuuu wub wub wub!!

[kyleimmadinosawr]

BEAST!



[woshigepro]

anyone knows where can i get such chain and sprocket?

[rorymurphy27]

ebay



[Jmaboxxi21]

forget the top comments... tighten it all!!!!!! );)

[s28400]

put some load on it now lol

[sallymaggiespotty]

Another DEATH TRAP for children and idiots.

[speedview725]

Where did you find that gear fitted with motor ?

[MrHector0309]

How did you get that sprocket in the tire

[wolfpack1953]

I would put a little tension on that chain with some kind of roller! otherwise I love what you did, keep up the good work!!! :)

[speedview725]

Where can I find those gears you attached to your wheel ? or can anyone tell me where can I get that ?

[Studi0usKidd0]

Which motor are you using??

Can you please tell me the specifications of the motor you're using??



[ahkao86]

0.1200w

[fairyheli2]

@ahkao86 no, 1200w, im guessing your don't know much about RC motors

[iulian207]

@fairyheli2 I made my self a brushless controller with optical sensors and a don`t know much about RC motors??? :)) maby you are in that position. Search for "Optical Driven Brusheless Motor" it`s my other video with this motor driven with optical sensor or hall sensor.

[fairyheli2]

@iulian207 I was responding to ahkao86, I know you know a lot about bldc motors, I don't. brush motors yes, but not bldcs, I am not saying you don't know about bldc's since you posted the video. i was only responding to some idiot spammer saying "0.1200w" in your comments

[madcowz2020]

with those small batteries i bet it doesnt last 5 minutes

[TeoFirefox15]

you bought from an RC Store the motor too?

[robbbilo]

BURNOUT!!!!

[kosti1122]

Now show it on allegro! ^^

[PoWlication]

you better let us see u driving with it :D

[BomBforLvL]

tighten that chain.

[wildenboy]

You better tighten that bolt ;)

[faultyservice]

What about doing a friction wheel drive with an acceleration switch linked to downward pressure being applied to a back pedal?

[DjInfiniteHD]

Thats like what turns in my girlfriends head when she wants to kill me

[pmgodfrey]

Packing tape and Erector Set parts?

Get a welder.

[annoyingorangepower]

nice bike???

[knaxon]

top speed?

[LeoKyoku1]

Hi, I am new in this youtube thing, I keep on reading that there is a part list down but I can't find it, can someone help please???

[sylar1989]

would it be posable to make a petrol one or would the frame and wheels not hold out? ive got one of these razor skooters and was thinking of putting a brush cutter motor on it.

[Infernostar18]

@sylar1989 hey, listen real good. cuz by the sounds of it, you dont have very much ambition. would it be possible you say?? well, find out for yourself, idiot. build it, use your imagination. i got a razor scooter too, and i bolted a 10 horsepower briggs and stratton to it. frame held fine. till i sat on it, it bowed and touched the ground. but thats called trial and error. you know what i did? i reinforced the middle by bolting a solid bar right to it. stiffened er right up good.

[sylar1989]

@Infernostar18 wow i asked a simple question and you leave a douche comment like that, im asking is it possible to put a petrol one on there because the frame may not hold, there only a kids scooter, iv'e never done anything like this i thought i might just make an old scooter sitting in my room into something cool, you don't know me so its stupid to say i don't have much ambition, so next time think before you leave a smart ass comment, heres a tip for you don't give anyone advice again.

[Infernostar18]

@sylar1989 listen, i dont mean to be a douche, but sometimes you have to be straight foward with a response to get the point across, which obviously you didnt. TRY IT, FAIL, TRY AGAIN, WIN. its the formula to every success story man. just chill. look at the universe. its limitless, ANYTHING IS POSSIBLE. see the trash can on the end of your drive way? nobody says you cant make a rocket out of it. see the piece of metal in your garage? nobody says you cant make a car out of it.

[sylar1989]

@Infernostar18 w/e not going to bother.

[Przemol69]

This is a scooter dick head.

[tehpanda64100]

seems like the break is in an awkward place. OH i see, it is on the back side. thought you still had to step on it.

[Pneumaticcannon]

@IRULE98 Let's see you're ELECTRIC BIKE must be amazing.

[eenergie]

well done

[argarlargar1]

im pretty sure this isnt a bike-please correct me if im mistaken

[Citywok455]

@robstartube thats not right... A electric motor has the same torque at 1rpm as it dose at 12000 rpms. A gar has a gear box because most gas engines dont make good torque until 3000-6000 rpms

[CCWSig]

@Citywok455 Correct!

[Citywok455]

@robstartube.

[TheAdde318]

the blue thing holding the engine, isnt that like Mecano or what the name now is... like Lego, but in metal?... x'd

[CCWSig]

@TheAdde318 I was thinking old Erector Set parts lol

[MyKubotaAUS]

awsome dude :)

[pathosbedlam]

Needs a chain tensioner and a chain guard, then it'll be a bit safer for those pesky loose shoelaces. LOL

[rodstartube]

I'm sure that thing won't start with a person on it. That is a noob design, those motors get torque only at high speeds, that needs at least a 100 to 1 gearbox. Why do you think cars have gearboxes?? 1... to start, 2nd, and so on, and 5th for high speed.

[tunermaster87]

hi! where can I buy the rear pinion ? I got the same vehicle ;)

[SvenskFilm2]

is it a blue mechano plate? and the chain looks like from lego when its spins :P

[budabob07]

Its a scooter not a bike...

[Neodymio]

A lot of velocity but torque?

[MrFreddyFeatures]

Look at the hex head, axle @ 0:44 wouldn't want to be on it hen the wheel comes off, haha

[LKmusicChannel]

Wont this only run for like, 3 minutes on WOT? 2.2 ah is very little for a battery i would go deep cycle 12v 50ah types.

[Grimdopple]

@LKmusicChannel On a razor scooter?

[LKmusicChannel]

@Grimdopple haha well yes maybe at least like 20ah and find a clever way to fit it in. Really cool setup otherwise. Where did u get the smaller sprocket?

[jimmehjimm]

i though the blue part was a lego piece in the thumbnail thumbs up if u thought so to

[Lukiola]

@jimmehjimm Shut up dude, I put your stupid thumb in your ass.

[jimmehjimm]

@Lukiola u would want to do that with ur thumb

[mptrax]

COOL IDEA !

[ahohman]

You should make a chain tensioner

[minibikerider1]

you have a semi bad link or two in the chain

[vettefan87]

Switch to a belt drive or somebody's going to get hurt.

[stickfig01]

i find this funny how its basically been made using metal mecano

[plazzax]

the chain will break and fly in the speed of light to your crotch

[andreisima1977]

bravo domnule :)

[TheMichaelhpd]

dude that looks awsome how much did it cost

[TheMichaelhpd]

dude that looks awsome

[ADY18K]

cool :D5* man

[fishyer777]

THAT SLACK WOULD SCARE THE SHIT OUT OF ME O.O

[solargamer1]

the battery is verry little

[ConnorXV]

is that just a high Amp potentiometer controller?

[Snickerbockers]

queer ass bike..

[vitakraft16niko]

how is this done, this is a cordless drill motor

[x19710]

@vitakraft16niko no it's a brushless motor as used on rc planes and helicopters

[crashbrandon10]

an erector set? how old are you? like 3?

[liviooo18]

the screw is unbolting itself,careful riding it :)

[CCSinventions]

where can i get that motor

[mahmahmonkey]

I wouldn't want to get bitch slapped with that chain if it came off!

[Hitlerschaukeltsic]

You need to tighten that chain

[coilsinamotor]

i dont think u can ride that

[sLiChEs13]

looks real safe Clear Tape Lol 

[austen205]

How did you make that! can you tell me! austen205 :)

[ICEKamiKaze]

piesa aia albastra cu gauri e dintrun set de "MECCANO".. unde mai gasesc si eu setul ala?

[xato909]

where i can bought one?

[monstermiataman]

chai n is a tad loose

[neptronix]

holy sh&&&&&&&&&&&&&

[TehShadower]

just so you know that isnt a bike, im not sure if you've noticed.

[logitechmartin]

haha you can see the insex screww spin

[beastmasterlove]

wtg man !

[theswedenmovie]

Nice going to build something like this:D

[pascalalainbergeron]

lol.. no brakes

[nick14kn]

get a 40/41# chain, and shorten it

[dolphire]

looks the chain could come off any minute,  and take your foot with it to hell...

[Grimmjowking]

can you show me how to make the home made servo tester

[wow1022]

better watch out on that rpm that chain looks like it's taking a beating from it.... don't want it to fly apart in your face....

[mibars]

that's nice, your chain is bit too loose.. BTW... This blue part... Is it from some kind of kids constructor set? :) I think I have some parts like this from two russian "build what you want" sets :)

[Numberonebikeslover]

can you send me the schematic of the circuit with the variable resistor which control the speed of the motor. I'm new to electronics. Thanks

[TecktonicTc]

Ohaaa 

[pieznice29]

Well for a start its not an electric bike, it looks highspeed but thats because there is no load and i doubt its actually 1200w. Still looks like a great electric scooter though, nice work :)

[Linky005]

Nice, but ur rear axle is loose.

[pochul]

i would not feel the tire ! it's must be uncomfortable for a long trip, just for fun

[hhhh1997]

ITS CALLED AN ELECTRIC SCOOTER NOT BIKE

[williambmx619]

How did you connect the sprocket to da wheel?

[ScaniaFung]

where you buy these kit?

[MagnetmanEXE]

Where did you get the sprockets and what size chain are you using?

Also, How did you attach the sprocket to the motor shaft?

Thanks :)

[miquelmahhhh]

great project......5*

[npwb3000]

hey can u tell me how to make the home made servo tester..

[iulian207]

@npwb3000 search the schematic on internet with LM555

[everybodyelsedoes]

chain is to big

[matthewmarrs123]

i like how the chain moves it's freaky.

[kdc43]

1200 watts from that tin-can-of-a-motor????????

HA! I'll believe it when I see it!!!!

[nick14kn]

@kdc43

lol i was the same until i looked uped the motor. the motor gets 1400watts+

Starting price is $89

controller going to cost you 40+

and batteries 40+

[SuperStefano1995]

brushles motor need good cooling !!!

[iulian207]

If u are using them at 50%(600w) there is no need of cooling and idem to controller

[davison1021]

@iulian207 what motor is that

[206robert206]

looks dangerous and loud!

[warlockboyburns]

nifty

[snowboardr147852]

how is that possible? a motor that small putting out 1200 watts? what kind of motor is it? have a website i can check out?

thanks.

[emilen2]

@snowboardr147852

Check out: Turnigy 80-100-B 130Kv Brushless Outrunner (eq: 70-55)

6,500 kWatt continous.. 9 HP from 1,5 kg.

hobbycity(.)com, search for idProduct=5142#

(Just happened to have page open in background :D )

[VerystrangeMaster]

that chain is loose...

[Blaze0820]

yeah" that'd be bumpy as hell! bigger tire's pleeez

[TheBikehacker]

how is that a bike ?

[mustekman]

holy shit 6c lipo?

[iulian207]

yes

[lookm8]

Hey Julian, can you provide a list of parts and names?

[iulian207]

YOU CAN FIND A LIST DOWN

[manfromregina]

When did a scooter become a Bike? title fail

[SourCreamPowder]

I have made kthat looking thing too!

[domandybiking]

where do you get them motors from

[iulian207]

From RC store

[domandybiking]

how much are they

[GeeksRus95]

the chain is too loose!

[hboyce4]

LOL tahts more than 1.5 hp. the minute youll jump on it and try to go you'll rip the motor stand right off. if you fik that its going to be really nice though

[Jule553648]

You never put up videos about how you drive theese things!! Great design, but i think 1200W is going to break the blue motor stand. Too weak.

You should put on at LEAST 25 Ah battery pack. That one is for powering calculators :D I bet it doesn't run for 5 minutes.(stressed)

[iulian207]

I do not have the movie because,nobody was to record.whit me on bike.i will try next time.

[bratonabike]

how will you ride that?

[swbluto]

My scooter's motor puts out 1800 watts, even though it could theoretically go upto 3000 watts. Anyways, just to let people know, that's equivalent to 35 mph up a decent hill and 45-50 mph on flat land.

[AussieJester69]

thuzjak3 its a RC motor it would indeed be 1200watt they come in upto ~7000watt in similar size. The use of RC motors is becoming very popular in the e-bike world small size HUGE power, one fella i have seen online has 10kw RC motor setup on a bmx bike.

[thuzjak3]

1200W on what voltage?

[iulian207]

24v

[thuzjak3]

so motor draws 50A ?i dont think so....how do you supply it ?with what source?what can give 50 A at 24V and be so compact?it is maybe 120W but 1200W not....

[iulian207]

It`s a Lithyum-Polymer battery and it can suply up to 50A and 24V.search on one rc model strore.

[VEC7ORlt]

Nice, but you probably should have some chain pretensioner.

[OghamTheBold]

No gearbox?

[iulian207]

it`s a very powerfull motor hi torq.

[kissmyhho]

what is the rpm for that motor and what top speed can you do. i am thinking it will be faster than those small diameter wheels will be able to keep stable unless on very smooth surface. be very careful.!