Tripage LED Fender Eliminator Installation

[DreamAirlines]

How sturdy is this? Looks kinda fragile, does it stay in position if you drive over a bump?

[viewdo600rr]

@DreamAirlines Doesnt move unless you want it to.

[vasturbator]

PARTICLE RULES!

[mike213yo]

No before and after? WTF

[brocknchrist]

hey do you have any problems running without your heatshield with that two brothers exhuast... don't like the way it looks with the old heat shield and the new exhaust... was thinking about trimming but i see that you just ran it with out...

[TGives]

@brocknchrist I run my two bros carbon with no heat shield and haven't had any problems whatsoever after about 5k miles.

[barnabasdb]

Hey, which tail light did you use? I thought for the 2007 the tail light hanges below the exhaust.

[zm5431]

nice, i can fold my plate up when im running from the cops

[sunnyjason]

what music did you use?

[sireartem]

too bad you can bearly see the tail light. That's the whole point. Make a better more visible tail light.

[tadding38]

Thats a slick fender eliminator kit.

Does anyone know who the soundtrack is?

[livin4tommorow]

what is the reason for a fender eliminator

[ncsnathan]

Im just guessing on this one, but it moves the plate up closer to the bike itself, rather than having it hanging. When it hangs, it catches air resistance. Plus, it gives the overall look of the bike, a much more slick look.

[xXxoSNOWoxXx]

Looks.

[Testingpointer1]

isnt drilling the plate number against the law?

or its alright?

[mtprinting]

doesn't matter, a cop isn't going to check

[Testingpointer1]

@mtprinting lol!!!!

[sparda1123]

I saw that your in florida also i was wondering has a cop tried to give you the 1200 ticket for iproper display of tag? or has everything been ok?

[chaunceyiloveyou]

yo!

were did you get the lights for the lisecene plate bracket?

because i did not see it on tripage website.

holla back!

[k9gsxr600]

sick.

[elcora18]

good job ,

[esbowman]

did you solder those, or not?

[twowheelsnobrain]

everyone knows his plates know LOL

[esbowman]

and this is a problem because???

You drive around all the time, advertising your plate number during the day. I see no difference.

[buckhuck40]

imo i think it makes the bike look cleaner if it's tucked back about two more feet, kinda hidden, but your way i think will make the cops happier

[prillewitz]

Looks neat, how can you find out where somebody lives according to the licenseplatenumber ? There is no public database if you ask me.

[viewdo600rr]

you can find it, there are places.

[LittoxT]

really, really clean.. how much did u spend ?!?

[viewdo600rr]

This light runs around 130 dollars i believe. I bought it from another forum member for 80

[slimesbro]

now that we have you plate number we can find out where you live and steal your shit

[viewdo600rr]

I dont hide my plate when im driving out in public, i dont see any reason to hide it here. Go ahead and come steal it, you wont be the first one thats tried.

[ironmb86]

Lmao at this comment, I'm sure slimesbro steals candy bars from convenient stores because he is really that pathetic.

[TGives]

@slimesbro Haha nice try fag. viewdo600rr rocked yo shit.

[bigfuzzballs]

you can have two brake lights? so i can get this fe kit and get a iwin moto light?

[viewdo600rr]

umm if you wanted two brake lights you could have it. Not sure why you would want 2 of them?

You can use this fe kit with the iwin moto light.  Just make sure iwin is still shipping lights

[jdubb408]

where can i get this at?

[viewdo600rr]

check the video comment

I dont think i can post the link directly on the comments here.

[fjones1914]

Well done!!

[pmgoedde]

kits was easy to install took about 30min to put on

[pmgoedde]

just put this on my cbr 600 w/two bros exhaust along with a iwinmoto tail light and it looks great

[viewdo600rr]

good choice, both great products!

[u39kun]

Nice! This helped me a lot!

[viewdo600rr]

good to hear :)

[4jiggy1]

u have pride

[pkthehood]

nice

[cbrjimjim]

what hugger is that and does it come in the $200 kit?

[viewdo600rr]

that hugger is stock

[fr3akn0t]

awesome write up...

[tacticalcombat]

the bracket that holds the exhaust up. where did you get that?

[viewdo600rr]

that is part of the aftermarket twobros exhaust.

[SwaTTrigga301]

to get this FE do i need to buy a whole kit? or just parts from the website? also

[viewdo600rr]

the website doesnt currently have this kit available, you have to email them. You can just get the parts you want. There are 2 things

1. License bracket with light

2. Mounting hardware for your Exhaust

[SwaTTrigga301]

1 question on the back of your bike where are the turn signals? are they combined with the red break light?

[viewdo600rr]

yes, they are integrated.

[cbrjimjim]

did u buy the full kit and does it come with that tag bracket?

[viewdo600rr]

yes it does

[bcbudz]

Thats by far the best FE I've seen on an 07 600rr. I've got the same bike and want to do this myself. I can't believe how they made the '07 with such a terrible back end. Why didn't they keep it the same as the '06?, nobody knows.

Anyways, I'm interested in the two brothers exhaust too. You can't really get a good feel for the sound without hearing it in person, so I was wondering how loud you find it. Is it a lot louder than the Jardine or Yoshi? I want a more quiet exhaust personally.

[viewdo600rr]

It's one of the louder exhausts, I dont know what the Jardine or Yoshi sound like in person. People on the forums say that the 2bros is one of the loudest except for maybe the devil exhaust. I personally think it sounds great, maybe a little too loud. If you want a more quiet exhaust i believe yoshi is the way to go, great looks as well.

[mvspeed101]

I'm a member on the RR forum and you replied to my thread regarding the relocation of the plate underneath the exhaust. What do I need for this install? I currently have a CW eliminator and want to relocate the plate directly underneath the exhaust. Can I use the existing LED light from CW?

[viewdo600rr]

I'm not sure, I would give tripage a PM on the forums. But if you have your own plate light maybe you can order a cheap aluminum license frame from ebay and use tripages mounting hardware on it. Then just use your own plate light? Not really sure what the Competition Werks F/E you have looks like. I would give tripage a PM first, he knows more about this than I do.

[mvspeed101]

Cool, thanks. Where did you get that license plate frame from? That's all I need to complete the install. All the wires are already run on my current FE. I just need to relocate the plate and change the frame.

Also, where did you hide the wire running from the plate? Any heat shrinking wrap used? Did you just run it around the exhaust and through the seat? Thanks

[viewdo600rr]

I just ran it around the exhaust bracket into the bottom of the screw hole for the heat shield. Maybe hold it in there with a black zip tie. I got the license frame and everything from tripage. But the license frame and LED light are the same thing. I'm thinking you would need a different frame if you want to use your plate light.

[cquenault]

Is that street legal?

[viewdo600rr]

It is not street legal. The again anything you do to your bike is probably not street legal. Read up on the laws, any aftermarket exhaust is illegal. Blinkers must be 10" or so appart and you need reflectors. Most of the things we do to modify our bikes makes them illegal however you will find most cops don't have a problem with it. I have not been pulled over because of my plate location. I have not heard of anyone that has gotten themselves into trouble because of this tag holder. GLuck.

[jflaten629]

do you have any idea how this looks with a yoshimura RS5 slip on? tail light visible?

[viewdo600rr]

Yes, I will message you the link since we cannot post it here.

[danesL4]

saw ur other video and it looks really good, thx for sharing and keep up the good work, the bike looks awesome, tripage is one hell of a vendor, great products and service all around, and that new FE is effin awesome as well...

[danesL4]

great video, just one question how is the visibility of the tailight with a two bros slip on? is it good or does the pipe get in the way? I purchased the same tripage tailight but i was just wondering if visibility would be good with that pipe since i am going to purchase one. thx....

[viewdo600rr]

I think the visibility is great, no problems here. If you watch my other video it will show you what it looks like in a bright sunny florida day. It's actually even more visible than the video shows.

No problems here, but some people prefer the blinkers that stick out for visibility. You can also get passenger peg blinkers.

[julytocbr600rr]

Un trabajo muy bonito. Si señor.