@greyknight7 Sharp edges can easily be smoothed over with a fine rasp, you can get one at the hardware store for ten dollars or so. And then you can file all sorts of things down.
I am a new youtuber that is going to be launching my new series later on, it is going to be MAGIC, please could you give me chance and go on my channel and check my teaser out and leave it a like and subscribe if you like.
This is really cool because I have always wanted to cut a bottle in half with a string! These days throwing it away is just no fun also I work at a string company and get to take home 5.6 miles of string a day after work.
@therambo211 you can put water (might have to be warm water, i havnt done it in years) into the bottom of a bottle and drop a good old knife that use for eating into it (sometimes shake it a couple of times) to cut the bottom off perfectly for a gravity bong/bucket bottle!
Great video. For people who are gonna do this wear a dust mask and eye protection when sanding. Those little glass particles can cut up the inside of your lungs.
Do this in firefox to ascess the secret firefox! its not fake its just the secret firefox unlocks every thing on a game or whatever! Press Ctrl and w and the same time to ascess the secret firefox!! :D
you would of gotten a cleaner cut using a diamond cutting wheel, i cut the tops of and turn them into candles for the game room to kinda kill the smell from the ashtrays
Super sweet!!! Although, i tried this about 20 some times, and it didn't work! I did it exactly as the video showed. But once I tried cracking the bottle, nothing happened? Is there secret super strength in the man behind the bottle cracking? or am I doing something wrong!?
@lilrp2 i don't think what you use matters, as long as it can absorb the flammable liquid like a wick would and the string is tight enough on the bottle so it doesn't move around you should get the same results
This is brilliant - I've been looking for a way to scavenge cheap things for the glass for a custom vacuum tube, if this will work for 2 cuts per bottle it will be great (the neck is a bit long to use a stem for one itself, but a cut about how is done on the video + halfway down the neck will save me a LOT of glass blowing work)
This is brilliant - I've been looking for a way to scavenge cheap things for the glass for a custom vacuum tube, if this will work for 2 cuts per bottle it will be great (the neck is a bit long to use a stem for one itself, but a cut about how is done on the video + halfway down the neck will save me a LOT of glass blowing work).
This is brilliant - I've been looking for a way to scavenge cheap things for the glass for a custom vacuum tube, if this will work for 2 cuts per bottle it will be great (the neck is a bit long to use a stem for one itself, but a cut about how is done on the video + halfway down the neck will save me a LOT of glass blowing work).
@slipknot1566 e clearly shows acetone, which if you read the label of nail poilish remover, makes up 60 percent at least. Or go to the hardware store as they sell it 99% pure cheap cheap
actone is really bad for you i used to run a paint booth and know that acetone may not imediately harm your sking the chemicals can soak in through you skin into you nervous system and can also destroy your liver and kidneys.
It's Acetone, he's using it because it burns itself and not what it's in (ie the string), so he set it on fire and revolved the lfame around the bottle, heating the line all the way around, so that when the bottle was suddenly cooled in water it broke on the line.
Thats so cool!
MonsterMisunderstood 1 week ago
Hot or cold water?
MrsReed042509 2 weeks ago
@MrsReed042509 They set it on fire so it would have to be cold.
MonsterMisunderstood 1 week ago
the song reminds me of crash bandicoot wtf
demonsparkx 3 weeks ago
Lol why woul you do that person?
TheCrankcross 3 weeks ago
well you are all sheeple. So I reach for my toothbrush or pencil and instead cut myself? Why would you do that person? This Awesomedude50.
Sparcamusprime 1 month ago
nobody is gonna spend this much time just to break a bottle. I do it the quick way with a fucking BOTTLE OPENER.
generationdumbass 2 months ago
@generationdumbass You break a bottle with a bottle opener?
xannmax 1 month ago
You spelled thanks wrong...
MrCodeTroll 2 months ago
i brought myself here
MrCrazyNun 3 months ago 9
FUCK YOU I MESSED UP MY BOTTLE GO FUCK UR SELF NO HELP PIECE OF SHIT. thanks (:
Sabi0627 3 months ago
@Sabi0627 lol I love people who rage it makes my day I wish there were more angry people like you.
Ezaziel 2 months ago
Вам учебник по физике подарили?
Лет 30 назад, школьником, такие эксперименты ставил...
jekalop 3 months ago
Херня, ничего нового не увидел.
SuperDevais 3 months ago
my mind is full of fuck
XxShadow13542xX 3 months ago
Exericize
0611930024838 3 months ago
"Thansk for Watching!" You are welocme!
underpathunderpath 3 months ago
without aceton?
OswaldoBonfa 3 months ago
Exericize
thecheeseboy 3 months ago
...or you could just get a regular cup and glue the beer label on it
wiggo987654321 3 months ago
@wiggo987654321 then you would need to spend twice as much money. Money for the cup and money for the beer...your logic is expensive.
hixjustin21 3 months ago
Mmm I love Kozel.. aka Goat Beer!
icyhotonmynuts 3 months ago
won't you risk cutting the shit out of your hands going for a pen or brushing your teeth?
greyknight7 3 months ago
@greyknight7 Sharp edges can easily be smoothed over with a fine rasp, you can get one at the hardware store for ten dollars or so. And then you can file all sorts of things down.
Sofar2 3 months ago
@Sofar2 sweet. Giving it a shot tomorrow!
greyknight7 3 months ago
tried, didn't work, used all of mums acetone. in trouble, thanks youtube
:(
LunaVanilla 3 months ago
Thansk for the tip!
DeathToCarl 3 months ago
ahh, the old thermal shock trick eh
TheSuperFungus 3 months ago
Pinterest
SarahMcKissick 3 months ago
This has been flagged as spam show
I am a new youtuber that is going to be launching my new series later on, it is going to be MAGIC, please could you give me chance and go on my channel and check my teaser out and leave it a like and subscribe if you like.
lets make our dreams come true TOGETHER.
thanks and like so people see :)
MrFantast1co77 4 months ago
"This'll look classy! Let's put our crap in a PBR bottle!
IMightStalkYou 4 months ago 2
Well hey, that's pretty nifty.
evanescencefreak2009 4 months ago
did this give anyone a bonner ....... im juss saying
eduardo112200 4 months ago
I tried this and turned my sink into a glass holder :)
EliteCrysis 4 months ago
Hax.
EDEDDEDDY9 4 months ago
No1s perfect?
400OO4 5 months ago
can i do this with a shoe lace?
jakemk1029 5 months ago
I attempted this it landed me in the hospital with a bunch of boo boos :(
hockeyholic55 5 months ago
stop your god damn bitching about password11116's comment its just a fucking joke grow up you cretins
TheRayBanRebel 5 months ago
@fullygrowntuna No idea why, but i just laughed SO hard at that joke. Nice comeback, man.
tylerboy565 5 months ago
@aquaagu2 I don't know what makes you so stupid, but it really works!
password11116 5 months ago
not workin...
holdscene 5 months ago in playlist bottle cutting project
This is really cool because I have always wanted to cut a bottle in half with a string! These days throwing it away is just no fun also I work at a string company and get to take home 5.6 miles of string a day after work.
azfryguy 5 months ago
wow...thanks for taking out your potatoe and recording this vid with it -.-
gutterfroggy 6 months ago 2
What does this have to do with dubstep mimes?
sirbean123 6 months ago 5
You would waste your time doing all of that, just to use a beer bottle as a tooth brush holder ?
AMAZING IDEA.
TheSnoopDoqq 6 months ago
technically, you didn't CUT in, you thermaly shock snapped it... >.> Either way though it was a great experiment.
ipwnuall2 6 months ago
@ipwnuall2 SMAAART ASSSS
lol jk
iEatMaPoo 6 months ago
"here son I made you a pencil holder...ah"
mattmanyou 6 months ago
Thumbs up if you found this after watching dubstep mime..
DJSupraKidd 6 months ago 5
i cut my figers doing that, but i dint need to cut my nails now
jokeramalho 6 months ago
Did you record this with your toaster?
NurdChaos 6 months ago
Coolness
poop4732 6 months ago
why the gloves?
prking97 6 months ago
Actually that was really cool!
ncreb86 7 months ago
the title of the video should be : How to cut a beer bottle with a string AND ACETONE ( wtf ! )
Oroshimisu 7 months ago
a dusbtep song sent me here....
hctcboy15 7 months ago 26
@hctcboy15 me 2 aha
mrtasi69 7 months ago
@hctcboy15 never heard of dusbtep,only listen to dubstep.
Ninjabanana19 7 months ago
0:26 NO SHIT!!!!
Vaiktorg 7 months ago
Billy Mays here with another fantastic product.
bigalkim11 7 months ago
So, who else got here from the Dubstep kid?
GirlswithGunsxoxo 7 months ago 16
Dont try this it blow up and broke my mirror
JTN1Productions 7 months ago
Like if you clicked on this after watching Dubstep Mime - Doctor P
IIDrAGoNx 7 months ago 256
lol Id make a bong out of that
therambo211 7 months ago 7
@therambo211 you can put water (might have to be warm water, i havnt done it in years) into the bottom of a bottle and drop a good old knife that use for eating into it (sometimes shake it a couple of times) to cut the bottom off perfectly for a gravity bong/bucket bottle!
CT2kX 7 months ago
Thansk
forcefedfists 7 months ago
cool trick but who carries acetone around with them?
teambrucewillis 7 months ago
KOZEL nice beer
britiw 7 months ago
That is pretty cool.
Sp3llCrack3r 7 months ago
whats the song name
BlueCrashteam 7 months ago
cool
pebs016 7 months ago in playlist Cool things to do
its a miracle.
ProducShuns 7 months ago
Anyone else remember that movie this was in? Yeah, I forgot it...
Phoaenix 7 months ago
@Phoaenix
How to be MacGyver: Alcoholics Edition
khaos4ng31 7 months ago
@Phoaenix there was a movie called 'Traitor' where he's making bombs and does this to a wine bottle.
JordanSeriously 7 months ago
you said string, not acetone, a lighter, a sink, water, and string!
RennyConti 7 months ago
I like this video because the music is awesome.
Mestaajaz 7 months ago
hey retards.. he sanded out the edges, its not sharp anymore.
thorizzle117 8 months ago 7
Its not sharp at all
Awesomedude50 8 months ago 34
I would LOVE to have a razor sharp broken beer bottle as a toothbrush holder...could you make me 1?!?
And 1 for my Mom too? (her Birthday is coming up)
backpayne2007 8 months ago 2
"Thansk for watching!"
WrongPersonLmao 8 months ago
potential party trick right here
BrassTaco 8 months ago
If I had a dollar for every pixel in this video I would have 1 dollar.
password11116 8 months ago 167
@password11116 whats a pixel?
llamasarefuzzy7 7 months ago
@password11116
WOULD BE AWESOME but I've seen this same comment before on another video
EurasianNinjaMutt 7 months ago
@password11116 videos aren't measured by pixels dipshit
cod7strats 7 months ago
@password11116 That joke's so funny that the last time I heard it I fell off my dinosaur. HA.
fullgrowntuna 7 months ago 8
@password11116 if i grew a dick everytime these got top comment i would be chuck norris
infammotoben 6 months ago
@password11116 what are you on about? there are hundreds of pixels i this video.
GeorgeHurst08 5 months ago
@password11116 good job. haven't heard that one before, jackass.
aquaagu2 5 months ago
@password11116 more like 50 cents
jakemk1029 5 months ago
@password11116 i would have 360 cuz it plainly says 360p...
slinky211 5 months ago
@slinky211 240p :/
xXfreakbotXx 5 months ago
@password11116 haha havent heard that one before.....
francky101 4 months ago
@password11116 no you wouldnt... you would have several hundred dollars. maybe even thousands.
00soundwave00 4 months ago
@password11116 no. no. that dollar would be mine.
Awesomedude50 4 months ago
Great video. For people who are gonna do this wear a dust mask and eye protection when sanding. Those little glass particles can cut up the inside of your lungs.
Joedog300 8 months ago
That was cool
jplumber100 9 months ago
its fake he scored it with a glass cutter first, the heat of the a nail pollish remover when he lit it up stresses the glass so it breaks easier
dogyslut07 9 months ago
step 1 to cutting a beer bottle or any other glass liquid container
Wait why am i doing this?
noobgotgame 10 months ago
Do this in firefox to ascess the secret firefox! its not fake its just the secret firefox unlocks every thing on a game or whatever! Press Ctrl and w and the same time to ascess the secret firefox!! :D
SuperSraw 11 months ago
@SuperSraw thats funny, cause ctrl and w just closes the current open window on the internet. douchebag
Metalhead12828 11 months ago
@Metalhead12828 haha unfortunately - you found out AFTER :L
shame... wouldd'a made a nice comeback ;]
TeamFortressNoobspy 9 months ago
@TeamFortressNoobspy nah, ive known that for a long time lol.
Metalhead12828 9 months ago
Thornoe112 wht he dose his sink has cold water in it so when he heats it up the cold and hot make it Easyer to crack open so yeah
exotic664 11 months ago
you would of gotten a cleaner cut using a diamond cutting wheel, i cut the tops of and turn them into candles for the game room to kinda kill the smell from the ashtrays
Corey497 1 year ago
Super sweet!!! Although, i tried this about 20 some times, and it didn't work! I did it exactly as the video showed. But once I tried cracking the bottle, nothing happened? Is there secret super strength in the man behind the bottle cracking? or am I doing something wrong!?
thornoe112 1 year ago
@thornoe112 me too lol
iplayrunescapealot 1 year ago
В бутылку до уровня нитки нужно налить воды, тогда трещина ровнее проходит. В СССР это каждый пионер знал. Какие же вы бестолковые...
Ruffitsme 1 year ago
How to cut a beer bottle with a string, aka how to waste time and resources because im unemployed and still live with my mom.
kellby123456789 1 year ago
that's bad ass but would shoe lace work?
lilrp2 1 year ago
@lilrp2 i don't think what you use matters, as long as it can absorb the flammable liquid like a wick would and the string is tight enough on the bottle so it doesn't move around you should get the same results
TokuinB 1 year ago
@TokuinB alrite mayne thanks for tha reply imma try it later and merry late Christmas to yu
lilrp2 1 year ago
This has been flagged as spam show
This is brilliant - I've been looking for a way to scavenge cheap things for the glass for a custom vacuum tube, if this will work for 2 cuts per bottle it will be great (the neck is a bit long to use a stem for one itself, but a cut about how is done on the video + halfway down the neck will save me a LOT of glass blowing work)
tuusnullorum 1 year ago
This has been flagged as spam show
This is brilliant - I've been looking for a way to scavenge cheap things for the glass for a custom vacuum tube, if this will work for 2 cuts per bottle it will be great (the neck is a bit long to use a stem for one itself, but a cut about how is done on the video + halfway down the neck will save me a LOT of glass blowing work).
tuusnullorum 1 year ago
This is brilliant - I've been looking for a way to scavenge cheap things for the glass for a custom vacuum tube, if this will work for 2 cuts per bottle it will be great (the neck is a bit long to use a stem for one itself, but a cut about how is done on the video + halfway down the neck will save me a LOT of glass blowing work).
tuusnullorum 1 year ago
what are the gloves supposed to protect you from fire ignites plastic
PureLegitness 1 year ago
i tryed doing this to my arm. i failed.
infintiyward 1 year ago
I used it to make a homemade vaporizer, just sand the edge to smooth it out.
sn3akypeeky 1 year ago
sandpaper the rim you asses
zomboy67 1 year ago
kozel ftw!
AlexandrusMegus 1 year ago
I tried it it works. But glass ended up in my foot.
feefe1551 1 year ago
That is so cool!
feefe1551 1 year ago
zippo lighter fluid IS BETTER THAN ACETONE!!!
nepobedivititanik 1 year ago
What the hell you would cut yourself whenever you reached to get you toothbrush or pen! That is really retarded especially if u have kids!
donutgirl5 1 year ago
@donutgirl5 Ermmmm i think you could put a strip of electric tape over the sharp edge of the bottle?
WipUrWinky 1 year ago
@rukiahentai313
I just want to know WHAT FUCKING SIZE OF CAM SHOULD I PUT IN MY BIG BLOCK POWERED MONKEY NAVIGATED LAND SPEED RECORD BREAKER?
757Fixer 1 year ago
uhm, that was a plastic beer bottle.
stinkytacolover 1 year ago
Are you supposed to bang it against the sink when you dip it in the water?
G3R50N27 1 year ago
ha! science rules :)
Numbah1Namek 1 year ago
I tried itand it does not work
fagewa 1 year ago
This is actually pretty cool imo. Stupid idea to use it for a toothbrush holder, but cool nevertheless.
unusualcatperson 1 year ago
utter writ-ing drop the e.
plutoplatters 2 years ago
Try using surgical spirits.
Ashburnerr 2 years ago
yeah there you go use it as a pen holder cut yourself when you reach to get a pen
monstermiataman 2 years ago 73
you moron you can't cut your hand if it's not sharp it's fat and whit a fat ending you can't cut your hand unless you are a moron then you will
SuperPhoenix5 1 year ago
@monstermiataman thats why you sand it down with wet sandpaper dummy : )
buddy4now20044 1 year ago
@monstermiataman lol grind the edge and you cut yourself, dont be lazy :P
TokuinB 1 year ago
@TokuinB yeah grind it and it shatters
monstermiataman 1 year ago
@monstermiataman no you dumb ass, u use a grinding tool and softly sand the edges lol
TokuinB 1 year ago
@monstermiataman No danger from sharp edges. Just rub the edge with very fine sandpaper and all the sharp edges will be gone.
oomblikkies 8 months ago
@monstermiataman Yeah, or you could just cover the top with tape or burn it blunt with a simple lighter,Without any severe danger or threat.
DieFradde 8 months ago
@monstermiataman Or be smart and sand it down.
TomaNistor 8 months ago
@monstermiataman its called SANDING IT DOWN
oThatkido 7 months ago 2
@monstermiataman No, it's not sharp silly. Lol
Lix198606 7 months ago
does this work with rubbing alcohaul sorry if i spell bad lol
punkrockrgg7 2 years ago
I tried it three times, couldn't get it to work.
Anonymitism 2 years ago
thank you so much no one else would tell me
slipknot1566 2 years ago
what fluid would make a really clean cut on the bottle rubbing alchohol, nail polish remover or lighter fluid
please respond i need to know :)
slipknot1566 2 years ago 16
nail polish remover
Awesomedude50 2 years ago 12
@Awesomedude50 better than nail polish remover; you can go to home depot and buy pure acetone as a paint thinner
zombiepancakes1 1 year ago
@slipknot1566 GASOLINE!!
Immaculite 1 year ago
@slipknot1566 yeah slipknot
funymaggot12 1 year ago
@slipknot1566 I think he set fire to it too?
Lix198606 7 months ago
@slipknot1566 e clearly shows acetone, which if you read the label of nail poilish remover, makes up 60 percent at least. Or go to the hardware store as they sell it 99% pure cheap cheap
lynel1985 7 months ago
awesome!
ImportanceOfWhatever 2 years ago
Dont need to wear glove, acetone isent toxic for skin, i used it to remove plaint ( But warning to open wound. )
hyrael2 2 years ago
actone is really bad for you i used to run a paint booth and know that acetone may not imediately harm your sking the chemicals can soak in through you skin into you nervous system and can also destroy your liver and kidneys.
just F.Y.I
lucasmorter 2 years ago
oh. fine i alerady have acetone in my system i should care about that.
hyrael2 2 years ago
sweet now i can make a bong
superbungabunga 2 years ago
me too
D3vilsMinion 2 years ago
does it work with other bottles?i tried a wine bottle and it didnt work, might be too thick
Ommy1282 3 years ago
is that nailpolish remover??
12kooko12 3 years ago
It's Acetone, he's using it because it burns itself and not what it's in (ie the string), so he set it on fire and revolved the lfame around the bottle, heating the line all the way around, so that when the bottle was suddenly cooled in water it broke on the line.
WoWJakfrost 3 years ago
would this work to cut a hole in a bottle or would it not heat properly? say a thumb sized hole or smaller on any side?
st4nd4u 2 years ago
It would probably just send cracks outward from the circle, but you can try it.
WoWJakfrost 2 years ago
thanks im just gonna get a diamond coated drill bit. kinda pricey but it should work perfectly.
st4nd4u 2 years ago
it works perfectly!
fulgeruldincarpati 3 years ago 2
doesn't work
jeanniecolleen 3 years ago
nice
Odood19 3 years ago
this video is soo cool
eccProductionz 3 years ago
kool
ZC1414 3 years ago