Awful. Crappy mix on the video, shit quality. I hope you roll it, that is if it even runs long enough to get to a unsafe speed. You are among many that give Honda a bad name.
i have A 1998 integra LS, and want to swap a JDM H22A, what engine mounts do i need, what kind of axles..shorter? and can i use my stock LS wiring harness but there is no VTEC wire off my LS wire harness how do i wire one or should i just get a hole new wire harness out of a prelude or accord VTEC? what type of ECU P13? what kind of shift linkage accord? and the VTEC wires were would i rewire them. you have done this swap and looks good. im so confused!! plz help
@jdheelfan The internet is riddelled with info on this swap and this swap has been done for like 15 years why not do it yourself you'll feel so much better driving it around knowing you built it yourself,Thats what building a cars all about.
wow bunhc of fuk tard comments i got a real question what size piping dide you go with im thinkin 2 1/2 i have a h22a in a 97 acoord just finished swap and am wondering what size pipe to go with
Wow, everthing was going great until that annoying cu**'s voice chimed in. Fuckin awesome build though thumbs up for that, but for shit's sakes with that song . . .
and more thing,,,my original fucking engine is soch 1.6 only,,:-( thats why i wanna change my engine,,to take more HP to my car,,and what you think is better to my car,,change engine or rebulid the engine and put a lot of after market racing parts??
do you think the h22 its going to fit in my 1998 honda civic si????without cutting or something to do,,,(just put it in the hood),,cause i wanna do it too,,,can you let me know???
@bbblopez it should fit in but you can't run your axles.. you have to run some diff. axles to fit. for example if you swap a h22 into any egs, you have to run da axles to fit.
@bbblopez if you have a b16..mind as well just rebuilt your engine and then mod it up with some head work..becuz doing the swap is going to take time and you have to go through all the state ref and stuff..but if you're going turbo then you have to tune your car after you're done installing the turbo kit and cuz you have to kinda built your engine to hold the stock psi for the turbo..i'm not trying to convince you go NA and that turbo is bad.. its up to you..its your project...
I'm thinking about doing the same swap on my ej
MrBlanco909 2 days ago
Awful. Crappy mix on the video, shit quality. I hope you roll it, that is if it even runs long enough to get to a unsafe speed. You are among many that give Honda a bad name.
frankmoocivic 3 weeks ago
shitty music
scratched vintag
fat guy no shirt
you beat a new gen honda civic. congrats.
JustBeastin91 1 month ago
Nice
geogon808 1 month ago
automatic?
hmoobfob 2 months ago
Hey I plan to put a h22a into a 93 civic eg what new parts did u need. Mounts wiring exhaust? Letme know
xxMiliyVinilyxx 2 months ago
Good Shit
JayyoUICEdOutkidd 3 months ago
I heard the h22 had a height problem in the integra. i have a 2000 ls. and was thinking off h22 aswell . true? false?
Stealthkiller503 3 months ago
false
jackie1186 1 month ago
yikers.. I dont like that coolant hose....
CopaSeticBeats 4 months ago
what the power gain from swap? Base to Tuned.
BigDirtyBasterd 4 months ago in playlist Accord mods
wtf thats no wire tuck tahaha
ilovehonda909 4 months ago
Hey what mounts u use I have a 92 integra and I want to do the same swap
DJTHUNDERJC1 5 months ago
Why would u want a b18 in a prelude lol it would be pointless for the amount of money you'll spend doing it
sctflasher379 5 months ago
Were the songs cover?
Ge0vone 6 months ago
nice i got a jdm h22 92 eg hatch pushing 217 hp with 167 fpt putting a turbo on it this weekend its fast but i want faster!
mustangtrever 6 months ago
Just wondering but can u put a b18 in a 92 prelude? Lol
imaninjasoipwn 6 months ago
Comment removed
nug4life 7 months ago
FUCKING VTEC YO!
skater4circa940 8 months ago
i have A 1998 integra LS, and want to swap a JDM H22A, what engine mounts do i need, what kind of axles..shorter? and can i use my stock LS wiring harness but there is no VTEC wire off my LS wire harness how do i wire one or should i just get a hole new wire harness out of a prelude or accord VTEC? what type of ECU P13? what kind of shift linkage accord? and the VTEC wires were would i rewire them. you have done this swap and looks good. im so confused!! plz help
thanks...
heyhomez 8 months ago
a lil to much to the right on the motor but it looks good
909fml 8 months ago
would a h22 fit in an accord 2000 ?/
Travieso209925 9 months ago
@Travieso209925 your a fucking legit retard
Hugehead30 8 months ago 6
@Travieso209925 yes it will i have a accord 2000 ex with a h23 vtec blue top 2.3liter and i got to say worth every penny
cashkidd19 8 months ago
nice i am puting one in my crx
17sti 10 months ago
that h22 sits a little too far on the drivers side what mounts are those?
MrWestphoenix 11 months ago
Dude i like the car and tell me the car run faster now
23anormal 11 months ago
Nice but were is the air inake lol
robh23a1 11 months ago
great video man
shokaae86 1 year ago
hey bro sweet teg was this your first swap on any honda before?
WeHaveSteeze 1 year ago
What kind of side mirrors are thoes?
dustin06969 1 year ago
I have a 96 Integra and a H22. Can you swap mine?
jdheelfan 1 year ago
@jdheelfan The internet is riddelled with info on this swap and this swap has been done for like 15 years why not do it yourself you'll feel so much better driving it around knowing you built it yourself,Thats what building a cars all about.
bloodieduckies 1 year ago
@bloodieduckies i would mind doing an engine swap myself but i also lack the knowledge 4 it, is their any sites u gonna shoot my way or forums even?
WestsideJuggaloFam 1 year ago
dump the back some more
KhmerKid309 1 year ago
Yet, The H-Series is still very potential.
nusdogg 1 year ago
h22 is some old ass technology. k-series FTW
SystemXpander 1 year ago
what is a wire tuck putting a new wire harness in??
cartoonboi 1 year ago
@cartoonboi its where you hide all the wires in the engine bay so no one can see wires
soloone87 1 year ago
wow bunhc of fuk tard comments i got a real question what size piping dide you go with im thinkin 2 1/2 i have a h22a in a 97 acoord just finished swap and am wondering what size pipe to go with
need01stfk 1 year ago
Is it alot of work to swap a h22 into a teg? Cause iv heard its alot of work for a civic
duhabcdef 1 year ago
honda integra?
fightclub550 1 year ago
@fightclub550 same shit dumbass...
fluf3ch1ch3n 1 year ago 2
nice integra man congrats and you did the swap really nice thats what im gona do to my integra .... honda ...
seductor0413 1 year ago
could u have picked a gayer song
john38127 1 year ago
Wow, everthing was going great until that annoying cu**'s voice chimed in. Fuckin awesome build though thumbs up for that, but for shit's sakes with that song . . .
BidibodiBidubu 1 year ago
kool.....this is my future project....nice video......
meatballthao 1 year ago
@meatballthao same here im savin for my motor now
STAR4159 1 year ago
and more thing,,,my original fucking engine is soch 1.6 only,,:-( thats why i wanna change my engine,,to take more HP to my car,,and what you think is better to my car,,change engine or rebulid the engine and put a lot of after market racing parts??
bbblopez 1 year ago
do you think the h22 its going to fit in my 1998 honda civic si????without cutting or something to do,,,(just put it in the hood),,cause i wanna do it too,,,can you let me know???
bbblopez 1 year ago
@bbblopez it should fit in but you can't run your axles.. you have to run some diff. axles to fit. for example if you swap a h22 into any egs, you have to run da axles to fit.
hmglorboi1 1 year ago
@hmglorboi1 so its better to rebuild my engine and expend some money and put some turbo???which one do you think is better???and cheaper???
bbblopez 1 year ago
@bbblopez if you have a b16..mind as well just rebuilt your engine and then mod it up with some head work..becuz doing the swap is going to take time and you have to go through all the state ref and stuff..but if you're going turbo then you have to tune your car after you're done installing the turbo kit and cuz you have to kinda built your engine to hold the stock psi for the turbo..i'm not trying to convince you go NA and that turbo is bad.. its up to you..its your project...
hmglorboi1 1 year ago
@hmglorboi1 sorry for late reply man,,,i only have D16,hehehe
bbblopez 1 year ago
Sick color, sick car, sick motor, sick rims...shall I continue.... Very nice
afninjax 2 years ago
this is my fucking video is this legal?
matomiguel 2 years ago
4real?
TaLoCc 1 year ago
yea this is my video i dont know how this happend but it did
matomiguel 1 year ago
lol at least ur car n video is bein known by people around the world..nice swap do you still have your integra?
TaLoCc 1 year ago
@TaLoCc yea i still have it now its with a new paint job and sir front end clean as hell
matomiguel 1 year ago
Thats siick. Nice build. Thats how my H22 looked like hanging on the cherry picker. :)
nusdogg 2 years ago