Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (66)

Sign In or Sign Up now to post a comment!
  • Can't wait...I'm buying it tomorrow :) My musician buddy Balasz is going to love it

  • I accidentally putted amplitube on headphones only i dont know how to put it on speakers too

  • @The1dynasty1 Go under settings and you'll see the proper setting to change.

  • Where can I get one of these cables?

  • @mrbobbyjonny Check the "Dealers" section of our web site and you can find online or traditional retailers that serve where you are from. Or you can buy directly from us.

  • So this device will work with a mixer?

  • @sethutkc350 You can plug iRig into your phone and then output to a mixer with an 1/8" stereo to DUAL mono 1/4" into two mixer channels.

  • @ikmultimedia I'm not much of an expert here. Laymans terms?

  • @sethutkc350 That is the type of cable you need. It is also explained on a slip included with iRig and it also has visual diagrams. If you have further trouble you can contact Tech Support from our web site. Thanks!

  • My app can't change the sound anymore! I have the delay on and it sounds the same as if the delay is off!! Why?

  • @dwelitz Make sure the tuner isn't engaged and that the 1st track in the recorder is armed. Also, contact Tech Support if you still have issues. Thanks!

  • ... can this be used with the iMac?

  • @longislandboxinggym Certain modern models, yes. We have more information on our site. Device Compatibility

    MacBook Pro released 'Late 2008' and on… yes

    MacBook released 'Late 2008' and on… yes

    MacBook Air released 'Late 2010' and on… yes

    iMac released 'Early 2009' and on… yes

    Mac Mini released 'Mid 2010' and on… yes

  • will a 3.5 mm headphone plug fit in the headphone jack?

  • i am getting very frustrated i can't get the prompt for headphones or speakers to come up anymore now i can't use speakers with my irig.

  • @IkMultimedia I bought an Irig, but when I plug on Iphone, I can't use the effects and the soung gets wheezings. what it can be

  • @Batutafilmes There can be many things going on. Technical Support is available to contact via our web site, and they would be the best to take care of your issue to get you running.

  • can you use the iphone or ipod built in speakers?

  • Would a stereo 1/8" to mono 1/4 cable work, when plugging into an amplifier?

  • @dptsh89 No, it would feed back. There should have been a slip with recommended cabling (with pictures) included with your iRig. You need 1/8" stereo to 1/4" DUAL mono.

  • @IkMultimedia i bought the iRig today but i conected to the the guitar my iphone and speakers but no sound from guitar, but i can hear the demos songs play could it be my amplifier cable or im doing something wrong?

  • @kittennveyron Make sure the first track is armed in the Recorder section. If that is not the issue you can contact technical support and they will get you sorted

  • Hi , Ive already bought the application , very satisfied ,

    is that possible to connect my own Microphone to Irig ?

    I dont want to buy the Irig Mic as my own mic is a professional mic , could I plug it in in Irig socket ? or it is only for gitar or bass ,

  • @mrsina1 You'd need an adapter to do so but it is possible.

  • @ikmultimedia

    tnx for reply . I appreciate if you give me more detail. like what kind of adapter I need ?

    Do I need Mic preamp ?

  • with this work with the Griffin Cable?

  • @thegreatcerebral probably but not with as good results since iRig has circuitry to do things like impedance adapting where the Griffin looks like it is just a cable.

  • tell me why i cant just splice and solder cabling together and make my own irig

  • @winnabego Because it probably wouldn't sound good due to guitars and basses and such requiring circuitry to do things like impedance matching (the same reason audio interfaces for your computer have "HI-Z" or "Instrument" inputs that do this sort of thing).

  • i want to plug in mines into my surround sound receiver using regular red and white colored cables and the output stereo will i get feedback or something

  • I've got everything set up correctly, but the guitar while going through the amp is not getting effected by the iRig at all, changing presets proves it's not doing anything... any ideas?

  • @Kittysafe Sounds like the tuner is enabled, possibly. If that isn't the case, give support a shout and they'll figure it out. Thanks!

  • @ikmultimedia Thankyou so much.

  • would this work for ipod touch 4th gen?

  • @paramorerox2 Yes. That has the proper I/O jack to work.

  • Does iRig work on AmpKit?

  • Could you please tell me where i could get the lead that goes to the amp eg 1 stereo jack that splits into two mono jacks please?

  • @narnyslip You might want to try Radio Shack or similar or look online for A/V product sites

  • i doesnt hear anything when im playing with it

    what should i do?

    it doesnt pop up any warning message

    WHY????

  • @ulfjanson Arm the first track in the recorder. Make sure insert FX are enabled on that track. Barring that, if these suggestions don't work please open a support ticket as YouTube comments are not a good medium for it. Thanks!

  • I need to get one of those

  • Connecting guitar to iphone ? what does that mean ?

  • @realjuvelive just what it shows... plug your guitar into iRig, then iRig into your iPhone, fire up the AmpliTube app on your phone and play through the guitar gear. Sounds quite nice.

  • @ikmultimedia

    I have the ipod touch 4th Gen, I plugged my guitar using a mono guitar cable into the irig port, then plugged the irig into the ipod. I then plugged my headphones into the headphone port of the irig. I then strumed my guitar but there was no sound output from the headphones. Is it because I have a faulty irig cable? I bought all the equipment as new.

  • @kelinghan make sure the track is armed in the recorder and not muted. Try the iRig FAQ if that isn't it and also you can contact support and they will get you all sorted out.

  • @ikmultimedia i got the same problem nothing works i checked the FAQ but it never works

    it never pop ups any warning message

  • @ulfjanson Please contact support

  • you guys really need to create a bass pack.

  • @MetalMetalBass1975 Thank you, I will make sure the team knows there are requests for more bass gear.

  • @ikmultimedia Hi thank you ,

    I play my bass using iRig but, honest , it seems something is missing I really hope to have a bass pack for the iRig very soon.

    Best Regards

  • My irig isnt working

  • @HighVoltage7177 You need to contact support. They will get you sorted out. Also, please check the FAQ at our site, most problems have been solved that way as we have every unit tested (not just spot checking some like other manufacturers do) so we've had very low rate of actual defective units. You could be playing with it, satisfied SOON if you get with our support department. Thanks.

  • what would happen if i plug it into my computer would it let me record my guitar playing?

  • @link1123333 With newer MacBooks / MacBook Pros you can use the combination input/output jack and record like an interface. if you do this on other types of machines, results will vary as you'll still need to use the onboard audio from the computer as your audio interface (though this will do the impedance matching which is very helpful)

  • can you use a regular stomp box pedal with this? a boss ac-3 for example?

  • @PaisleyFan7 You could, results may vary but just like putting a pedal in front of an amp.

  • mine is on order...

    a no brainer for the price if you ask me...

  • @tubetwang Thanks! We're proud of this. Great reviews and people are loving it, makes us very happy. Enjoy yours when it arrives!

  • how well does the iRig handle the impendance difference between the guitar and iphone?

  • @garageink74 It is a good part of what it is made to do specifically. It handles is very well.

  • juuuust curious...is this any indication that the pre-orders are shipping out already? or are you guys just putting this video out really early?

  • @mongchacha Still set to ship very early July which is not that far off, so this is a nice way to see how to hook it all up in advance.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more