I have HIDs on my Lancer GTS too from DDMTuning also with the DRL bypass and everything works perfect but there is no cut-off line and there is some glare, but when I put the stock halogens in there is a cut-off line, anyone else have this issue?
@MitchDaSnitch Because the headlight reflector is designed for the Halogens, installing HID's will evidently produce more light intensity and scattered light. You can reduce the glare by lowering the alignment of your Low Beams.
@heymynameisjae Oh ok I got you, thanks for the info, the funny thing is when I installed the HIDs, I had to adjust the driver's headlight beam because it was too low and to the right compared to the passenger side headlight, it took forever but I finally aligned it evenly with the other one
@heymynameisjae Yup I did that as well, and I saw that the driver's HID bulb doesn't fasten all the way like the passenger one does, I thought that it might be a defect so I switched the bulbs but it's the same,so I just tightened it as much as it could so it doesn't become loose and just aligned it with the other one.
Where did the actual headlight housings come from? Any other nods on the RA I'm sitting just below 280 hp just curious, trying to hit 300 on stock turbo.
@jsgonzales1515 I had my headlights retrofitted with TSX Projectors. No power mods on the RA except cat-back exhaust. Plenty invested in suspension though. :)
Ok I need some of these!!! Got the same car as the second silver one and I installed LED lightning eyes wired into the parking lights. I dont want the drls on for the first setting on the light switch. Im also going to install an HID conversion kit and I dont want them to come on unless I turn the switch to the far position!!! Thanks man!!!
Ok I need some of these!!! Got the same car as the second silver one and I installed LED lightning eyes wired into the parking lights. I dont want the drls on for the first setting on the light switch. Im also going to install an HID conversion kit and I dont want them to come on unless I turn the switch to the far position!!! Thanks man!!!
is the second lancer (with halogen bulb) with HID installed? those yellow lights look like their OEM halogen lights. Also if i install your relay harness will it have those buzzing sound? i installed the regular relay harness and buzzing sound came out whiches no good..
@Reikobaby Yes, my DRL Bypass is also 100% compatible with Stock OEM (halogen) Bulbs. If you hear a buzzing sound from your HID's, then that is simply electronic noise. Mine do the same but they become almost inaudible after a few min. If you hear a constant clicking from the Relay, that is due to the DRL's. With my DRL Bypass installed, you will not hear any constant clicking coming from the relay.
@Reikobaby Unfortunately, that's a common misconception about my DRL Bypass. Allow me to explain: I build an electronic circuit specifically designed to eliminate the DRL signal. I then construct this circuit within a 9006 HID Relay Harness--Hence, why they look similar to a standard relay harness. In other words, I provide a "modded" relay harness that is designed to bypass the DRL's. A standard relay harness alone will NOT eliminate the DRL signal.
@Reikobaby I do provide the DRL Bypass w/ Relay Harness and jrox is my eBay ID. Yes, the DRL Bypass is guaranteed to bypass the DRL's. In the special case that it does not, I do offer a 30-day return/exchange policy. =)
I bought this product last week, and I just receved it this morning, and had it installed after lunch. AND THIS RELAY WORKS!!!! INSTANT RESULTS SUPER EASY TO INSTALL now I can drive my lancer without any flickering from my HIDS =D
@jkdbjjconnection Glad to hear others have spread the word! The installation is Plug & Play, so it's real simple. Nonetheless, I do provide a set of Installation Instructions.
@litof430 Yes, my DRL Bypass should work no problem. I construct an electronic circuit designed to eliminate the DRL signal. I then build this circuit within a Relay Harness. You can find me on eBay. =)
@heymynameisjae where/how can i find you? i really dont like driving with my h.i.d's on in the daytime n the flickering is starting 2 annoy me. will it void n e warranty from the dealer?
@litof430 Sent you a PM. One of the best perks of my DRL bypass is that it's 100% Plug & Play. Therefore, in the case you have to bring your X to the dealer, simply remove the DRL Bypass. EZ SQUEEZY :D
@Evosoul89 no.. i drive Outlander 2009 or Evo 2010 ;] it depends on weather and the road ;] ..and i have coupe cabrio but it dosen't count cuz it is not Mitsubischi.. :]
@Rosarionikko93 A standard 9006 Relay Harness alone will not disable the DRL's. I construct an electronic circuit designed to eliminate the DRL signal. I then build this circuit within a Relay Harness; Hence, DRL Bypass w/ Relay Harness.
how much were these and where did you get them?
skiersarefags 5 months ago
@skiersarefags Check out the link in the description.
heymynameisjae 5 months ago
I have HIDs on my Lancer GTS too from DDMTuning also with the DRL bypass and everything works perfect but there is no cut-off line and there is some glare, but when I put the stock halogens in there is a cut-off line, anyone else have this issue?
MitchDaSnitch 6 months ago
@MitchDaSnitch Because the headlight reflector is designed for the Halogens, installing HID's will evidently produce more light intensity and scattered light. You can reduce the glare by lowering the alignment of your Low Beams.
heymynameisjae 6 months ago
@heymynameisjae Oh ok I got you, thanks for the info, the funny thing is when I installed the HIDs, I had to adjust the driver's headlight beam because it was too low and to the right compared to the passenger side headlight, it took forever but I finally aligned it evenly with the other one
MitchDaSnitch 6 months ago
@MitchDaSnitch Hmm. I would also make sure that the HID Bulb is also seated properly & securely--Just as an extra check.
heymynameisjae 6 months ago
@heymynameisjae Yup I did that as well, and I saw that the driver's HID bulb doesn't fasten all the way like the passenger one does, I thought that it might be a defect so I switched the bulbs but it's the same,so I just tightened it as much as it could so it doesn't become loose and just aligned it with the other one.
MitchDaSnitch 6 months ago
Where did the actual headlight housings come from? Any other nods on the RA I'm sitting just below 280 hp just curious, trying to hit 300 on stock turbo.
jsgonzales1515 7 months ago
@jsgonzales1515 I had my headlights retrofitted with TSX Projectors. No power mods on the RA except cat-back exhaust. Plenty invested in suspension though. :)
heymynameisjae 7 months ago
This has been flagged as spam show
Ok I need some of these!!! Got the same car as the second silver one and I installed LED lightning eyes wired into the parking lights. I dont want the drls on for the first setting on the light switch. Im also going to install an HID conversion kit and I dont want them to come on unless I turn the switch to the far position!!! Thanks man!!!
lancernut 9 months ago
@lancernut Yes, my DRL Bypass will do just that! =D
heymynameisjae 9 months ago
Ok I need some of these!!! Got the same car as the second silver one and I installed LED lightning eyes wired into the parking lights. I dont want the drls on for the first setting on the light switch. Im also going to install an HID conversion kit and I dont want them to come on unless I turn the switch to the far position!!! Thanks man!!!
lancernut 9 months ago
Comment removed
Reikobaby 1 year ago
where can i buy jrox's drl bypass relay at?
Reikobaby 1 year ago
@Reikobaby You can find me on eBay by searching "DRL Bypass." Or you can find the link in the video description. =)
heymynameisjae 1 year ago
is the second lancer (with halogen bulb) with HID installed? those yellow lights look like their OEM halogen lights. Also if i install your relay harness will it have those buzzing sound? i installed the regular relay harness and buzzing sound came out whiches no good..
Reikobaby 1 year ago
@Reikobaby Yes, my DRL Bypass is also 100% compatible with Stock OEM (halogen) Bulbs. If you hear a buzzing sound from your HID's, then that is simply electronic noise. Mine do the same but they become almost inaudible after a few min. If you hear a constant clicking from the Relay, that is due to the DRL's. With my DRL Bypass installed, you will not hear any constant clicking coming from the relay.
heymynameisjae 1 year ago
How many lancer do u have dude?
columbuscrewfan20 1 year ago
@columbuscrewfan20 The white RA is mine and the GTS is my sister's. ;)
heymynameisjae 1 year ago
HI, I checked the "DRL Bypass w/ 9006 Relay Harness" picture on ebay, it looks exactly like the "hid relay harness", which i did buy and didnt work.
so if i buy jrox's "DRL Bypass w/ Relay Harness" it will work quranteed?
Reikobaby 1 year ago
Comment removed
Reikobaby 1 year ago
@Reikobaby Unfortunately, that's a common misconception about my DRL Bypass. Allow me to explain: I build an electronic circuit specifically designed to eliminate the DRL signal. I then construct this circuit within a 9006 HID Relay Harness--Hence, why they look similar to a standard relay harness. In other words, I provide a "modded" relay harness that is designed to bypass the DRL's. A standard relay harness alone will NOT eliminate the DRL signal.
heymynameisjae 1 year ago
@Reikobaby I do provide the DRL Bypass w/ Relay Harness and jrox is my eBay ID. Yes, the DRL Bypass is guaranteed to bypass the DRL's. In the special case that it does not, I do offer a 30-day return/exchange policy. =)
heymynameisjae 1 year ago
Comment removed
Reikobaby 1 year ago
this is evo yeah ??
Liberaltedjo 1 year ago
@Liberaltedjo Yes, my DRL Bypass is compatible with Evo X models (w/o OEM HID Projectors).
The video shown is of a 2009 Lancer Ralliart (white) and a 2009 Lancer GTS (Silver).
heymynameisjae 1 year ago
where can i buy this?
wisnia9pl 1 year ago
@wisnia9pl Sent you a PM. =]
heymynameisjae 1 year ago
I bought this product last week, and I just receved it this morning, and had it installed after lunch. AND THIS RELAY WORKS!!!! INSTANT RESULTS SUPER EASY TO INSTALL now I can drive my lancer without any flickering from my HIDS =D
jkdbjjconnection 1 year ago
@jkdbjjconnection Thanks for the positive feedback! Enjoy!
heymynameisjae 1 year ago
You should do an instructional video =D I'm buying your product soon, ive heard nothing but good reviews!!!
jkdbjjconnection 1 year ago
@jkdbjjconnection Glad to hear others have spread the word! The installation is Plug & Play, so it's real simple. Nonetheless, I do provide a set of Installation Instructions.
heymynameisjae 1 year ago
i have a 2010 evo none sss, will it work on mine? and how exactly did u do it?
litof430 1 year ago
@litof430 Yes, my DRL Bypass should work no problem. I construct an electronic circuit designed to eliminate the DRL signal. I then build this circuit within a Relay Harness. You can find me on eBay. =)
heymynameisjae 1 year ago
@heymynameisjae where/how can i find you? i really dont like driving with my h.i.d's on in the daytime n the flickering is starting 2 annoy me. will it void n e warranty from the dealer?
litof430 1 year ago
@litof430 Sent you a PM. One of the best perks of my DRL bypass is that it's 100% Plug & Play. Therefore, in the case you have to bring your X to the dealer, simply remove the DRL Bypass. EZ SQUEEZY :D
heymynameisjae 1 year ago
or u just install HIDs and take out your daytimes makes ore sennce
l7e1p9 1 year ago
get a live and go buy evo :]
stanek007 1 year ago
@stanek007 don't be a hater you're probably driving a kia. and learn to write proper english damm fool...
Evosoul89 1 year ago
@Evosoul89 no.. i drive Outlander 2009 or Evo 2010 ;] it depends on weather and the road ;] ..and i have coupe cabrio but it dosen't count cuz it is not Mitsubischi.. :]
stanek007 1 year ago
oh man, I wish I had your outtie... your wheels are SICK all I have is the 07 ...I just love the look of the new one's ..they look mean :):):):):)
olverafam 2 years ago
so if u connect a relay there is no need to disable the drl?
Rosarionikko93 2 years ago
@Rosarionikko93 A standard 9006 Relay Harness alone will not disable the DRL's. I construct an electronic circuit designed to eliminate the DRL signal. I then build this circuit within a Relay Harness; Hence, DRL Bypass w/ Relay Harness.
heymynameisjae 2 years ago
the point, ones able to us h.i.d and not have to keep the lights on at all time. the drls make the hids flicker.
chosen636 2 years ago 2
ur an idiot, stfu
hmoobher 2 years ago 2
whats the point of this?
bluefalcon1632 2 years ago
@bluefalcon1632 As it states in the info: to eliminate the DRL's. You should read it sometime.
heymynameisjae 2 years ago