How to Assemble a Complete Skateboard

[ChevyChafes]

This guy is awesome

[Avark99]

Does the deckcome with the holes for the screws for the trucks or do i have to put them in myself?

[f0615388]

Whenever I lean on my board with risers, I hear and feel a click, it's not the bushings.

Any help>?

[kingofawesome21]

thats wat she said

[kingofawesome21]

thats wat she said

[BloodyHoneyBunny]

i don't like using a drill... i don't want pressure cracks on my board... =\

[skaterdude134100]

thats what she said :P

[FunnyKidSayWhatNow]

do i have to put the nuts on if its a girl skateboard?

[TheLilbenjamin]

Cool i guess helped me.

[6Plus9is69]

And you got the train coming in.. Lol.

[arthure33]

I love how he just disappears under the desk

[nonamre]

My foot just fell asleep...

[KBBomber2468]

i try to go to your website but it always comes up to skate soup .com

[MrEtniesrocks]

i put on my wheels on by doing just a wheel not washer is seemes beter to me!

[nakhsa18]

i think it runs better but fucks up your bearings and they get dirty faster too :P  @MrEtniesrocks

[johnqpublic912]

the trains a coming is the only way to be a man

[Sonictrick]

hahahahahahaha 0:50

[theweirdone1995]

haha dropped to the floor lol

[sheps801]

how is that even funny?

[TwiceVicodin]

dude no worries

they're high

[skateboardingmad]

0:38 lolol

[Goodfingerz099]

LOL u rock ur funny NUTS

[marcoheras187]

lol he said take the nuts at 0:39 hahjahahhahahha god i cant stop laughin

[aalvarado194636]

@marcoheras187 wow dude grow some nuts because only ppl who laugh at stupid things like this dont have nuts

[EBlueLancer]

what are risers for?

[marcoheras187]

to provent wheel bite

[superswimster]

if the wheels are anybigger thne 54mm

[pooopful]

lol he sanked in to the floor ^_^

[NikeSBJack]

do you really need a washer???

[itinkgirlzhot12]

nahh its optional

[derek123109]

no, not really the washer just helps space out the bearing and the screw i dont ride with washers its fine

[dano5478]

thats how you know youre a man... LOL

[rumblefightersteam44]

lol the entire time i was watchnig this i was thinknig of NUTS!

[gamerz78]

Hey why do we need risers and do you recommend them?

[lemonadepants]

nah

[horiblevideo]

you need them if you have loose trucks, and you turn to hard, yu will get wheel bite and stop inplace, so use them if you have low trucks and high wheels

[jacquelyndeschamp]

LOL NUTS

[YeOleLeprichaun098]

what do the washers do?

[carluvur]

it helps the bearings go faster

[blink182fan911]

no it does not!

[footymaster789]

it creates a space between the wheel and truck

[payableondeath2008]

your washers wont get lose

[blink182fan911]

they help brotect the bearing from the nut you put on so if you mess up while tightening they wont get smushed

[readingvixen16]

Wtf "train goin buy thats how you know your a man"

[dantech93]

lo if theres any frip residue on your nuts just wipe em off with your finger

[boydlewisboyd]

this like everything in fast mostion

[turdude]

i hav a skateboard, and I dont no if i should get new trucks, or new wheels. i cant get both cuz too expensive=(

they are both the same price, aboout 20 and 25

whats more important? plz reply

[masterofsomething025]

just change trucks and wheels every 3-4 months maybe 5 and that'll be good

[mdabomb693]

get new trucks. and u dont need to replace trucks every 3-4 months!!!!! ive had mine for 3 years. u need to replace ur trucks wen it pulls to one side or wen its broken

[turdude]

yea same ive had mine for like 3 years

theyre world industries

but the axle threads are kind of smashed on the end so i cant screw on one nut

[choco33333333]

how long does wheels last? :/

[mdabomb693]

till u get flat spots. that happened to me after like 4 months

[choco33333333]

wat are flat spots?

im new with skateboarding.

cause im getting a used board,and i dunno wat to replace

[mdabomb693]

its actually what it said sounds like. ur wheels some how wont be round in some places. u can tell cuz wen u spin the wheel and pit ur fingers on it lightly ull feel it

[burl0721]

flat spots are just flat spots on your wheels

[thejjjisthejjj]

a flat spot is a section of the wheel that is flat instead of round

[TwiceVicodin]

i got a flat spot once cuz a taxi ran over my board. And it survived! But the flat spot ran 1/4th into my wheel.

stupid taxis

[r2rodrums]

get the wheels cuz trucks las very long, wheels so need to be replaced.

[foofoognarnar]

wheels

[foofoognarnar]

wheels chances are you dont really need new trucks

[Mugstain]

lol, liked the exit.

[ruck1990]

how can u tell how tight to do ur weels

[Hosannask8boardTeam]

lol..."you can get those nuts on real eazy..."

[nobodie4life]

i saw a purple zero asylum in the back round

[m0ney4me]

the train and nuts help u know ur a man

[SupraNirvana]

not funny

[LemonDragoon]

LOL

[jamicanfish7]

do u actually need the washers cos i lost mine

[stefdopekid]

do ALL deck come with holes for your trucks.+ how do i know what size wheels i have if i wanna buy new trucks

[TheCrazySK8r]

All decks do all wheels fit on all trucks

[stefdopekid]

soz didnt mean to ask the second one. i meant to ask how do i know the size of my trucks and if they will be the right size for my deck

[AlFredandBogey]

thanks for the tips.  your videos are great

[element17771]

i cant get my bolts flush and smooth with my griptape...HELP ME!

[altoids18ROX]

dont use bolts to hold your trucks on, use good old american duct tape!!

[onlinedude757]

lol

[granto425]

nice that really helped me put it together. i tried 2 go 2 ur site but it wouldnt work

[bunzigga]

yea......blank has been closed for about 2 years now......:(  i live near the town where they had the shop. that was the greatest place in the world

[Xtreme01013]

hey im getting a real skateboard for the first time and my dad say that we can do it without all those tools is that true and if it is or isnt send me a message immidiately if its not tell were i can get some tools XTREME01013

[barkinparkin]

its sorta difficult because u need to use some muscle and the only tools u really need is a screwdriver, a wrench, and that is it actually

[b0redavid]

i dont like using power tools when i assemble my skate. i like to feel the nuts (that came out weird)

[madmattt1996]

LOL!

[failmuch]

CHOOOO CHOOO! LOL I HEAR A TRAIN

[UnicornandPie]

Hi, please help me. I don't skate what's so ever and I'm got a skateboard for a girl for Christmas. I got the deck, but it didn't came with the trucks, nor wheels or bearings. Does size matter on the trucks, wheels, bearings, or whatever? Please help me out guys, and thanks. I really don't want to just get her a plain board, because that would be lame and pathetic.

[altoids18ROX]

most girls will tell you that size matters...lol

[H4rry14]

@altoids18ROX thats what she said

[choco33333333]

corse it didnt come with trucks and wheels you dumbass

size matters XD

[Ppguin18]

this helped a lot thank u

[clarkyboy56]

ha nuts

[xALFADOGx]

wats a good complete skateboard for ramp and street? and wats a good wheel sizze for ramp and street. respond and tell me the trucks wheels and board.thank you

[choco33333333]

deck=8"

wheels=55mm

[zach99mhc]

how much do you sell just the decks for

[novaone11]

thats cool thanks im thinking about buying a pack from west 49 do you no if they make it there or do you ahve to make it

[Darkstar181Skate]

You can request that they put it together, im not sure if it adds to the price, if it does its a very small amount.

[skjk66]

it is prety good but it stops a lot

[FibViTa]

i would like to work on a skateshop seriously :)

[skateerrocker335]

me 2 it looks like fun

[FibViTa]

it would be awesome

[skateerrocker335]

too bad im to young to work in a shop

[Setback001]

wow it takes me like 15 minto put a skateboard together it took him a few min damn

[HGClark]

he already had one truck on and griptape thought so it took less time

[89allthetime]

dude its a total pain in the ass to do this without the unitool

[skaterlife3]

you can get those uts on there real easy

[Despotes518]

LOL!

[barneymilk2k5]

are shock pads same as risers? i got 52mm wheels and i want a shock pad to reduce vib.

[deathsk8erwithballs]

awesome

[calum174]

does it matter which way the trucks go round

[koolman529]

how much does a complete skateboard costs that already setup?

[Airman32292]

if u want one thatll last theyll go for about $90-$110

[srfdood]

Dude I want this guy to assemble my skateboard if im too lazy

[michael667890]

he got same tool as me

[hustleking28]

he is fucking pro at doing that yo

[briwanna33]

Hey if I get an 8.12 deck what size wheels should i get.

[jeepneyproduction]

60mm

[briwanna33]

Thanks so would i need risers on the 60mm

[jeepneyproduction]

in my opiniondont use risers

it makes tricks harder

but it helps prevent cracks

SO idk ur choice

[MISSxMURDER17]

what? that wasnt really helpful, not good for beginners, too fast for my little brain and he could have at least turned the board around so we could see what he was doing. what the hell are washers?

[cowieScoTLAND]

thats what the pause buttons for :)

[ShavosBlackJacket]

that was extremely helpful, you're just stupid.

[MISSxMURDER17]

hey buddy was i talking to you? butt out douch bag...geez..sad youtubers

[ShavosBlackJacket]

Learn how to spell douche.

[MISSxMURDER17]

geez...um thanks buddy????? o_O

[SilentEarthxx826]

Cause thats a total accomplishment

[rushm19]

their spacers for the bearings

[MISSxMURDER17]

yea i realised that now xD thanks man!

[Magiciantimmy]

there like metal hula-hoops

[SilentEarthxx826]

Thats was really helpful actually.

[elementskater510]

risers pads are for keeping dust out of your trucks and for softer landing

[espinoramiro]

wat are risers for?

[nairbzaid]

i got some big wheels 56mm should i use risers?

[RaidenX]

yeah. or else you'll end up having wheelbites and its irritating because it will stop you.

[nairbzaid]

yea i got alot of marks but it dosent touch that much because i have tight trucks

[RaidenX]

but still risers wont hurt :P i got 53's and im waiting for them to turn into 50's then i can go full out loose haha.

[zombiepatrol]

can u please do a video oon how to remove a stripped srew on a skateboard

[DarkHawk28]

My trucks are perfect for steering, no problems at all, and my Element deck has so much pop its unbelievable!

[buttajones1]

what size wheels should i get for 8" size board

[kriegundfrieden]

wheele size has nothign to do with deck size if you like vert go for bigger wheels i liek 52mm they're average i guess

[petepete157]

what are risers for

and are they good if ur wheels are 50.5mm?

[miguelrockstar13]

ya, they reduce the damage your trucks do to the deck, but get longer hardware

[birdhouseskateboards]

if u only have 2 washers on each truck, do u put the washer behind or in front of the wheel?

[htime9119]

u should get more washers and put them on each side of every wheel

[justinjohnston]

ha the board wasnt assembled but when he flipped it the other truck and all the wheels were on... trippy

[blankskate]

Actually, I didnt want to edit any of these videos so we took them in one take. I pre-assembled the back truck and hung it off the edge of the counter so you couldnt see it.

[wishicouldsk8]

i got a new board 2 days ago and when i ride it , it just turns to the right really bad ..

how can i fix the problem??? plz can someone help me

[DWIReaper]

youre trucks are way too tight

[Killionar3]

actually they should be tight not loose unless you wanna turn like dat

[wakodako2007]

yeah but there realy tight and they did that on mine, i losened them a tiny bit and there okay

[Girlskater1440]

when u first get trucks the easiest ways to break em in is loosen em an turn A LOT

[munk1mag1c]

dude ure wiked lol

[pspslimsilver]

dont you work at goodtimes

[blankskate]

Yeah....I stole all this stuff and started my own shop

[CavemanFBS]

why the fuck did u close the shop?

[blankskate]

Sorry :(  wasnt our first choice....TRUST ME!

[RawrGreenRawr]

Lol, you just pass out at the end?

Looks like your fucking dying.

[SkaterPwnage]

lol are you like the only guy on the internet team of blank?

[blankskate]

Wait a second. Blank Skate has an internet team? NO WAY! I should try to get on it. I am going to start my come back TODAY! WHOOO HOOO.

Actually, I just made these videos before I went into surgery in January. I figured they would be really creepy sounding if I died on the operating table.

I may have died & just not know it. Kind of like that naked guy in Bruce Willis' bedroom in the blockbuster smash hit movie the 6th Sense. Although, that guy wasnt actually dead until he shot himself

[SkaterPwnage]

blank lol im not talking to you im talknig to some retard named him666

[SkaterPwnage]

hey could you do it the other way use the drill for the phillips head/allen key with the skate tool or no?

[blankskate]

You can.....but it isnt advisable. You should always turn the nut NOT the phillips head. Or else you will be that kid who comes into the shop with stipped out heads.

[sk8Geek53]

haha u can see my old deck in the background.

its the one in the third row from the left. and the fourth one down.

...it was a piece of crap.

[dredwings40]

wow this really helps

THANK U SO MUCH

[scooterkid01]

I usually put spacers in the wheels but, they still work fine with out!

[blankskate]

When do I refer to the washers as rubber? You're crazy

[SkaterPwnage]

HIM666 your really dumb washers are metal not rubber dumbfuck

[punkgrl325]

Wow u got those bearings in in no time. I usually have trouble getting them in

[504BOIROB]

"put those nuts on those bolts ya digg"

[JeffOz112]

were is this skate shop???

[Fester241192]

my truck keeps coming loose even though ive tigtened it like 100 tyms already wtf shud i do?????

[HIM666dark6light]

tightening your trucks dont really matter that much.having loose trucks is much better for me.

[Fester241192]

yeh i guess but i can actually hear my bolts shaking on my trucks but i think the threads are broken

[tazerme]

get some different 1s

[Fester241192]

yeh i will do when i get some freeeken money :p

[scooterkid01]

New ones...??? lol