hey, nice idea, but it think u usedmagnets like bullet trains but i have to point out one problem if u are using magnets and are going to make this a product of tamiya, if it's using magnets, then what will happen on tamiya tracks, i mean, they're not metal.
@TeCkDaNiUs sc mi rivolgo a te visto ke 6 l'uniko italiano qua su ..=), credi che abbia usato dei magneti in modo da creare 2 poli ke contrpponendosi generino un kampo elettromagnetiko in modo ke la renda sospesa ????
great idea's man!!!...i hav a suggestion..i think for the propulsion of the hover drive is...use the basic concept of jet engine...more like the vacuum system.."suck all the air in and blow it!!"...'blowin up u storm'(dyna storm)...^^
are the tracks magnetized too? i think if its magnetized, the whole track would be a magnet, so mini4wd with motors will be decelrated because of the magnet.
hey for propulsion you could make the magnets sit inside horizontally mounted wheels... the set up for racing will be dependent on aero and wheel angle, lots of possibilities!
Era solo una prova cosi' per divertimento...sarebbe bello fare tutta una pista cosi' ed una mini che funge per bene, ma la manutenzione sarebbe 10 volte quella delle mini4wd normali. Chissa' se un giorno avro' piu' tempo e materiale per completare almeno un circuito e 3 macchine :)
In reality, (if they are planing to make a real car)...One slight little error in Degrees could lead to a devastation destrustion....(the car looses it's megnatic balances, n gets attracted to another car, then after that it continues to another car and so on...one huge ball of cars)...tho it's kool to make a toy tho
who said it wont work? it WILL works just put your mind to it and IT WILL WORKS... Germany already proven it with maglev train why not this fella, dont be so sceptical...
its just a prototype...the real deal will have an actual chassis made for it and yes, 4 reals. Also its going to be able to use AAA batteries as well as AA, to lighten the load. I haven't worked on the project in a year, but eventually i'll get back on it.
hi (i'm the owner of that car). Yeah, a friend of my dad recently told me about maglev (like the japanese trains). I plan to look on to it, but it'll be a while before i get as far as complete a full 3 lane track. Anyways, no worries...i'm not abbandoning this project.
2 Powerful 1230PA Motor w/ Ducted Fans Control system off a Remote Control Corporate Jet for $42 USD will supply 2 Mini Hover Crafts at $21 each.
Each jet engine is 40mm diameter, so would fit nicely on a 92mm wide Mini 4WD chassis.
HoloMotors 4 months ago in playlist mini4wd
We will build an entire track for leviation races and post videos on youtube. Great idea. Peace.
HoloMotors 4 months ago in playlist More videos from Sirio50
thats what i was thinking.
rthao008 11 months ago
dude, you used the magnets same polarity (ex. south to south) that's why it levitates.. good 1, but can't be used on race maybe for display..
alronmendoza 1 year ago
@alronmendoza put elisi and motor with battery it will run like a speed boat
jayr122001 5 months ago
Wipeout 2097 is fkin dope ! Bet i got the year wrong in the title
aotearoastyle 1 year ago
cool..is this use magnetic levitation??
MabuchiBoy95 1 year ago
Wonder how much would it cost to make the "Track", not to mention the car...
Rayz093 1 year ago
come hai fatto? che spettacolo!
Finester92 1 year ago
hey, nice idea, but it think u usedmagnets like bullet trains but i have to point out one problem if u are using magnets and are going to make this a product of tamiya, if it's using magnets, then what will happen on tamiya tracks, i mean, they're not metal.
DMdrcd 1 year ago
fantastica invenzione ma se trovi un modo di farla camminare cn un elica o robba simile potresti inventare qualcosa di nuovo!! =D
TeCkDaNiUs 1 year ago
@TeCkDaNiUs sc mi rivolgo a te visto ke 6 l'uniko italiano qua su ..=), credi che abbia usato dei magneti in modo da creare 2 poli ke contrpponendosi generino un kampo elettromagnetiko in modo ke la renda sospesa ????
clanredair 11 months ago
@clanredair anche io sn italiano
MsMRyugioh 3 months ago
nice thinking :)
drlazy88 1 year ago
i like the concept make real model car!! it can catch more fun!!!
djmhykl 2 years ago
wow. like to see it in action :]
Kanashto 2 years ago
use electricity as your propulsion...this is a design from present day rail systems in Japan and Europe. Good job! I like the propeller idea.
billman2112 3 years ago
Whoa!
Thats awesome!
You should get a video of it running up.
cedartowndawg 3 years ago
bellissima trovata,
ma quell'elica che hai montato,girando potrebbe urtare per terra.
Ci vuole una di diametro più piccolo.
cmq sei sempre il migliore, Ciao.
sozoro93 3 years ago
great idea's man!!!...i hav a suggestion..i think for the propulsion of the hover drive is...use the basic concept of jet engine...more like the vacuum system.."suck all the air in and blow it!!"...'blowin up u storm'(dyna storm)...^^
kasetman 3 years ago
This has been flagged as spam show
MA COME FA?
46VAVAVAMATTO 3 years ago
u did ur best men!!
letlet1348 3 years ago
are the tracks magnetized too? i think if its magnetized, the whole track would be a magnet, so mini4wd with motors will be decelrated because of the magnet.
hotrodz13 3 years ago
hey for propulsion you could make the magnets sit inside horizontally mounted wheels... the set up for racing will be dependent on aero and wheel angle, lots of possibilities!
edm418 3 years ago
oh I see... bestamerica gets credit for that one!
edm418 3 years ago
whataaa???
marfrielliano 3 years ago
Interessante questa idea XD
Un misto tra una mini4wd e una navetta di Wipeout o,o
Se ne potrebbe ricavare una nuova categoria di mini4wd :D
cliptheracer 3 years ago
DAMN!!!!
HOW ITS WORK ?
yudimartinus 3 years ago
man thats cool!!!!! your best!!!!
Michaelzoom89 3 years ago
magnets?
TheNewBarrina 4 years ago
prova a fare una riproducendo le navi star wars, sarebbe spettacolo xò....
skacore22 4 years ago
vorrei conoscere il pazzo che inventa ste cose, immagino hai usato dei magneti x fare cio...
skacore22 4 years ago
ciao :)
Si magneti a forma di disco.
Era solo una prova cosi' per divertimento...sarebbe bello fare tutta una pista cosi' ed una mini che funge per bene, ma la manutenzione sarebbe 10 volte quella delle mini4wd normali. Chissa' se un giorno avro' piu' tempo e materiale per completare almeno un circuito e 3 macchine :)
ho33es 4 years ago
I built a dirrerent model of that, and didn't waste so much time and money on it.
2003Yamaha125 4 years ago
interesting...i spent 2$ on about 30-40 disk magnets and about 5 minutes taping it together...
ho33es 4 years ago
thats almost what i did, i'll try to make a video of it
2003Yamaha125 4 years ago
what song is this
luffysasukeichigo 4 years ago
"Firestarter" by The Prodigy
edm418 4 years ago
i don't understand...
meisainsani 4 years ago
another problem might be that if a track warped it could affect how smoothly the car runs buttime may tell sweet idea though
attic998 4 years ago
nice crap you got there
silvergun28 4 years ago
In reality, (if they are planing to make a real car)...One slight little error in Degrees could lead to a devastation destrustion....(the car looses it's megnatic balances, n gets attracted to another car, then after that it continues to another car and so on...one huge ball of cars)...tho it's kool to make a toy tho
AgeOfFear 4 years ago
macam hape lah,pakai medan megnet ajer iyek...kena advant lagi ni lah
HANTUKUBUQ2010 4 years ago
who said it wont work? it WILL works just put your mind to it and IT WILL WORKS... Germany already proven it with maglev train why not this fella, dont be so sceptical...
zulkifleerasip 4 years ago
How many magnet you need to get it cover the whole track?
NeoAtlantis 5 years ago
never heard of electric magnets??? hahahahha...regards...
liadon666 4 years ago
That will never work. There's not enough room for the propeller to spin and if you find one small enough, theres not enough thrust.
5370H55V 5 years ago
are they going to be prop powered?
321834 5 years ago
no need to insert Batteries COOL!
MegumiFF7 5 years ago
its just a prototype...the real deal will have an actual chassis made for it and yes, 4 reals. Also its going to be able to use AAA batteries as well as AA, to lighten the load. I haven't worked on the project in a year, but eventually i'll get back on it.
ho33es 5 years ago
best to put 4 small wheels on both sides anti the wall
bestamerica 5 years ago
awesome!!!
123clown123 5 years ago
nice idea!
capryu90 5 years ago
COOL!
328gio 5 years ago
you know you could make alot of money if you manufacture actual toys and tracks of your car design
FlakeyWaffle 5 years ago
nice magnet trick maybe you can learn more from maglev
r12ky 5 years ago
hi (i'm the owner of that car). Yeah, a friend of my dad recently told me about maglev (like the japanese trains). I plan to look on to it, but it'll be a while before i get as far as complete a full 3 lane track. Anyways, no worries...i'm not abbandoning this project.
ho33es 5 years ago
Your Car Is cool.How did you do it?
solinng 5 years ago