How were you able to do the swap? I've been looking for the mounts and other things for the swap but haven't had any luck. I have a '78 Datsun 280z, and I am trying to do the 2jz engine and transmission conversation. Any tips on how you did it?
Does anyone know where i can get a 180Hp straight 6 or v6 engine that will fit the car, the one that i own is in the middle of being restored, the original engine was missing when i bought it.
(v6 preferable) i also need to know if there are any in Australia.
@baii3r that is just oil. It isn't uncommon on startup due to the rings not being seated, residue oil from assembly etc. As for holding the turbine on first startup, shouldn't use your hand, proper thing is to prime the oil system prior to even starting the engine. Not working with a jz block however, not sure how the pump is driven.
Bridgeliver, the reason he`s holding the turbine wheel in place is to let the turbo get oil pressure before spooling up for the first time. But from your general language i will assume that you are an idiot. And theres no problem running it without coolant for a little while. Its most likely the first startup, to check if the thing will actually run. Probably some shitty basemap too, but good enough to start it with, wich i think was the general point. Jesus christfuck people.
and run a 2jz with a 100% vacuum leak thats really good...
can you say lean as fuck?
** and just idling or wide open, theres still about 2000* temps in the combustion chamber... theres no cooling fins or liquid to dissipate the heat so, yeah, theres a threat with the heat...
@dwnrety1 Have you even ever owned a vehicle with a 2JZ? I haven't, but I would think that like 99.999999999999999999999999999999999999999% of other engines, it's safe to run it without coolant for a few minutes when it's cold, just to see if it will run. Which is EXACTLY what these guys are doing. So fuck off, idiot.
@brapboys503 do you know what 2000* can do to a cast iron block, or an aluminum head when there's nowhere for that heat to go?
I'd rather wait and hook shit up properly than run the risk of warping the head or blowing the headgasket. douchebag.. unless you have something useful to say dont even bother talking to me...
@kingman87se you don't need boost to compress air because its called displacement, otherwise most of the cars on the road won't even run according to your statement.
I don't know who posted that comment under my name. I don't type that way and it's a stupid statement... I've never seen this video before lol. I'm sure I left my account open on a friend's computer somewhere.
70 cars deserve anything the owners give it moron! what the hell?? theres always a guy who talk shit about someone else on here just cuz they aint doin better. or is it because theyre black??? WOW! NICE CAR GUYS! KEEP IT UP!
he isn't holding anything, his fist is in front of the turbo to see if it is working and sucking in air, notice how there is no intercooler piping yet?
idk but probably for a good reason. do you own a shop?
im guessin cuz they didnt know what was going to happen so they waited until it started then checked the oil pressure or some shit. make sure the turbo was gettin oil so they didnt fuck up a turbo
im interested in how the engine lined up and which tranny you used because this is my dream engine in my dream car this is a setup i amgoing to make in my lifetime
i dont think they were not trying to break it in. if they were, there would be no such thing as 2nd attempt, although cranking so oil wil flw through line to oil inlet is proper. 2nd, ther is no reason to stick your hand in the turbo inlet. besides that, its a nice clean swap with the correct engine offset 3/4 to passenger side like factory would position.
can someone please explain why T Pain has his hands in the inlet of the turbo? i'm doing the same swap in my 74 260z also, the engine is a sr40gtte type R for racing!
Hybrid motorsports has done it again with a new true hybrid, A supra powered 260z these guys do not play around. They are the best place to go for engine swaps because they do right the first time!!
This has been flagged as spam show
They stole the car
longboardingjews 4 days ago
How did you tighten the belt? I have a feeling you did it the way I did it on my 1j, but just curious =) btw WICKED setup. Very nice Z 1car!
corollafrenzy 2 months ago
damn that engine bay is clean ass fuck
touyang55 3 months ago
sick beat what song is it from and dope car
LloydsMusicLab 3 months ago
il manque juste le radia !!!!!
235x16 3 months ago
How were you able to do the swap? I've been looking for the mounts and other things for the swap but haven't had any luck. I have a '78 Datsun 280z, and I am trying to do the 2jz engine and transmission conversation. Any tips on how you did it?
Samuel280zman 4 months ago
Nice swap man, what song is that playing in the background, I like it.
MrBrational 6 months ago
if you go for displacement you need more room though in some cases that arguement is just stupid since they get the same power >.>
saga212 6 months ago
Did you guys make the crossmember for the swap ? If so how much? I need 1 for a 1jzgte into my 74 260
dafrankfuter 7 months ago
point should be a fucking 2jz motor in a nissan just ruined the car
96infinitii30 8 months ago
why did u film this? that was so boring it's ridiculous
Soundgarden8497 10 months ago
Does anyone know where i can get a 180Hp straight 6 or v6 engine that will fit the car, the one that i own is in the middle of being restored, the original engine was missing when i bought it.
(v6 preferable) i also need to know if there are any in Australia.
12Deathcon 1 year ago
what was the smoke from when start up?
baii3r 1 year ago
@baii3r that is just oil. It isn't uncommon on startup due to the rings not being seated, residue oil from assembly etc. As for holding the turbine on first startup, shouldn't use your hand, proper thing is to prime the oil system prior to even starting the engine. Not working with a jz block however, not sure how the pump is driven.
kwkiller 1 year ago
Bridgeliver, the reason he`s holding the turbine wheel in place is to let the turbo get oil pressure before spooling up for the first time. But from your general language i will assume that you are an idiot. And theres no problem running it without coolant for a little while. Its most likely the first startup, to check if the thing will actually run. Probably some shitty basemap too, but good enough to start it with, wich i think was the general point. Jesus christfuck people.
MadMaxx570 1 year ago 43
@MadMaxx570 exactly lol some ppl just like to fight even if they dont know
justinguttormsen 1 year ago
@MadMaxx570 I couldnt have said it better my self, i actually give these guys props for having something in that level.
228whpEG6 8 months ago
wow thats really smart...
run an engine with no coolant..
and run a 2jz with a 100% vacuum leak thats really good...
can you say lean as fuck?
** and just idling or wide open, theres still about 2000* temps in the combustion chamber... theres no cooling fins or liquid to dissipate the heat so, yeah, theres a threat with the heat...
dwnrety1 1 year ago
@dwnrety1 Have you even ever owned a vehicle with a 2JZ? I haven't, but I would think that like 99.999999999999999999999999999999999999999% of other engines, it's safe to run it without coolant for a few minutes when it's cold, just to see if it will run. Which is EXACTLY what these guys are doing. So fuck off, idiot.
brapboys503 1 year ago
@brapboys503 do you know what 2000* can do to a cast iron block, or an aluminum head when there's nowhere for that heat to go?
I'd rather wait and hook shit up properly than run the risk of warping the head or blowing the headgasket. douchebag.. unless you have something useful to say dont even bother talking to me...
dwnrety1 1 year ago
wow no radiator huh?
Sonicku 1 year ago
@Sonicku Engine was only idling, no real threat with heat and whatever
produKtNZ 1 year ago
sick ride
no intake exhaust yet? lol
pdhami01 1 year ago
Is it just me or does that motor sound like its lost compression on 1 cylinder, listen to it while cranking...
redruM0381 1 year ago 9
@redruM0381 cause there is no boost going through the motor to build compression
kingman87se 10 months ago
@kingman87se
That doesn't explain loss of compression on 1 cylinder.
redruM0381 10 months ago
@kingman87se you don't need boost to compress air because its called displacement, otherwise most of the cars on the road won't even run according to your statement.
z06camaro 7 months ago
@z06camaro
I don't know who posted that comment under my name. I don't type that way and it's a stupid statement... I've never seen this video before lol. I'm sure I left my account open on a friend's computer somewhere.
kingman87se 7 months ago
It's probably a ring that had not been seated yet. once it runs for a bit it'll get better im sure
Dragon150043 9 months ago
@redruM0381 yur tripping bro , but wee all cant know forsure . i thought so too , but come on the motor is old , fuk the rebuilds !
idontmessup 9 months ago
@redruM0381 It;'s most likely a newly rebuilt engine, so will not have good compression on any cylinder at first.
caniwitech 2 weeks ago
This has been flagged as spam show
fucking nigger. ya keep your hands in the turbo go ahead. maybe some boneless chicken fingers will strew about
bridgeliver 1 year ago 2
@bridgeliver wow.....racist? lol
elijahinky 1 year ago
@elijahinky u loled do not lie to me
bridgeliver 1 year ago
@bridgeliver I did, but then I was like, "damn, did he really say that??" lmao
elijahinky 1 year ago
@bridgeliver learn something about cars you cracker before you call go all racist on people.
coldfuzionzxx 1 year ago
@bridgeliver asshole
DjayJohn 1 year ago
70 cars deserve anything the owners give it moron! what the hell?? theres always a guy who talk shit about someone else on here just cuz they aint doin better. or is it because theyre black??? WOW! NICE CAR GUYS! KEEP IT UP!
watchthisrobotmove 1 year ago
70s cars deserve 70s music
notrut 1 year ago
must he have is paws in the inlet.....what the fuck t pain
sqweekyknee 1 year ago
not good to run it without any type of cooling system that long...very nice swap though :)
jdoggydog567 1 year ago
@jdoggydog567 sure for all that time and $ that they have a temp Gauge
IRONSEAN7 1 year ago
@IRONSEAN7 Yea I guess lol...bad ass swap though
jdoggydog567 1 year ago
nice man i want ma 2jz to look like that
MrElias713 1 year ago
love that set up invisible ic piping and radiators hoses
4g63tgsx 1 year ago
thats fucking clean
heus199 1 year ago
Looks very neat...how did you achieve that...wheres all the wires?
mosbah100 1 year ago
Actually he probably is holding the turbo from spinning until the oiling system pushes through everything. It's very easy to do on a big turbo.
mdmyers7206 1 year ago
@mdmyers7206 finally someone who knows what hes talking about! hell yea man these fags dont know shit on these posts.
watchthisrobotmove 1 year ago
wow that sits in there perfectly
1minitoy 1 year ago
y end the fuck was he holdin the turbin wheel what a dumg ass
0spaceboy 2 years ago
@0spaceboy Learn to spell before taking the piss!
pimpdaddydarren 2 years ago 2
@pimpdaddydarren eat a dick fagg i didn't spell shit wrong
0spaceboy 2 years ago
he isn't holding anything, his fist is in front of the turbo to see if it is working and sucking in air, notice how there is no intercooler piping yet?
stuntrider15 1 year ago
@0spaceboy
idk but probably for a good reason. do you own a shop?
im guessin cuz they didnt know what was going to happen so they waited until it started then checked the oil pressure or some shit. make sure the turbo was gettin oil so they didnt fuck up a turbo
is300ss 1 year ago
@0spaceboy Its just anouther way of priming the turbo of oil....
meet07 1 year ago
@meet07 oh ok i see
0spaceboy 1 year ago
their selling this car right now in florida. ima buy it
DKSLIDER86 2 years ago
o shit nvrmnd u got it all on the forums fucking nice!
stuwk1 2 years ago
im interested in how the engine lined up and which tranny you used because this is my dream engine in my dream car this is a setup i amgoing to make in my lifetime
stuwk1 2 years ago
so much room in the bay. haha but that will be one sick datsun
86LiftedK10 2 years ago
ill post the vid here so u can c it
randypapiloco 2 years ago
i dont think they were not trying to break it in. if they were, there would be no such thing as 2nd attempt, although cranking so oil wil flw through line to oil inlet is proper. 2nd, ther is no reason to stick your hand in the turbo inlet. besides that, its a nice clean swap with the correct engine offset 3/4 to passenger side like factory would position.
lt1snail 2 years ago
why do you dry start it??
oldschoollude 2 years ago
can someone please explain why T Pain has his hands in the inlet of the turbo? i'm doing the same swap in my 74 260z also, the engine is a sr40gtte type R for racing!
lt1snail 2 years ago
you do this with a new turbo to allow good oil flow before it starts to spin. part of a proper break in
uN33DaR0L3model 2 years ago
Comment removed
Deph11s 2 years ago
so i heard T Pain had his hands in the inlet....T Pain vs compressor vanes...t pizzle it is.
nice engine soul brotha
sqweekyknee 2 years ago
thats not even a 2jz its a 4 cylinder twin cam
jknight4eva 2 years ago
i count 6 coilpacks, might wanna get your eyes checked there jknight4eveR
turbo240ka24det 2 years ago
that is a 2jz if ever I've seen one
TraxxasKing 2 years ago
If thats not a 6 cyl they have 2 extra intake and exhaust runners.
Str8pipedRanger 2 years ago
lol you fail
jimbean99 2 years ago
is it stock bottom end?
CodyCollinsSkater1 2 years ago
Mad props to nick & justin very cool dudes,
ya there running it without a radiator if you knew anything about swaping a car you always dry start it.
nurve15 2 years ago
nice man i am doing the same thing but in an 89 pick up with t67 wht tranny u got
you449 2 years ago
is it just me or are they running that engine without any coolant or other cooling system
carmsbody2000 2 years ago
doesnt matter till it hits the thermostats opening temp. doubt they let it get that warm. i can idle my car for 8 min before its "warmed up"...
twistymcslide 2 years ago
....are they running it without a radiator....
TXmatrix2nr 2 years ago
Hybrid motorsports has done it again with a new true hybrid, A supra powered 260z these guys do not play around. They are the best place to go for engine swaps because they do right the first time!!
bbhpmotorsports 2 years ago
where are they located?
jimbean99 2 years ago