FREE ENERGY FROM AIR CIRCUIT PART 17/24

[MrTpengineer]

It's probebly grabbing energy from the gound and the air so when you move it your taking away or adding voltage between the air and the ground? just a thought... Kind of half way between a earth battery and an air circuit.

[INVENTOR3]

@MrTpengineer I feel confident it is getting its energy from frequencies in the air. And im sure the ground and antenna have everything to do with getting the circuit to resonate with the incoming frequencies on the antenna. Yes, Interesting thoughts, thanks for commenting :-)

[MrTpengineer]

@INVENTOR3 Yup :)

[jbkibs]

is the copper pipe on the North, South, East or West? maybe that matters...

[INVENTOR3]

@jbkibs N. must have been tuning things just right.

[rosserver]

Voltage is nothing! Load it down get some watts. Rubbing a balloon on yer head can get you over 10 thousand volts. If it won't do work (light a light bulb) then it is nothing. Free voltage is NOT free energy.

[repawnd]

This is very interesting, thanks for posting!

[liljosh512]

This is amazing. You are my idol.

[INVENTOR3]

@liljosh512 Thank you very much

[TheNeokorben]

DO YOU HAVE A DIAGRAM OF THE CIRCUIT OF THIS YOU HAVE CONSTRUCT?

[INVENTOR3]

@TheNeokorben check the first few videos i have on this series, also check out the HOW TO vids part 1 & 2

here is part 1..... watch?v=_Fuw2V0COEY also some drawing at bottom of page here... paulslab dot blogspot dot com :-)

[Ajohns0n1]

A thought - Positioning of the ground rod with respect to the coils. Which way is North, South- Flux lines of the earth?????

[tonymarie1984]

can u put water inside the tube to conduct more?

[nnixon6]

Your meter's out of focus.

How did you eliminate the induction effect from the overhead/underground power lines? Or did you.

If I hold a volt meter's + lead in the air and ground the - lead I get ~100mVAC and I get ~250mVAC just from my skin.

The only thing you're getting from the air is the ability to verbalize this crack-pot theory.

[INVENTOR3]

@nnixon6 RCA and Nokia are using this method now to charge cell phones on the go, without batteries or an outlet plug. search yahho for "charge cell phone using ambient energy".

[electrofly23]

did I miss the total schematic? where does the coil attach to the circuit? ground?

[imatelly]

makes me think your not taking into account lenz law,and north and south,lenz law will casel out alot of power if the bar is set wrong,thats my best guess

[bett101]

to make your antenea longer make a coil antenea ,electric dont know whether it is long and straight or a coil.

[INVENTOR3]

@bett101 I tried this,,with no luck,,i think everything is in resonance now...

[bett101]

have you tried non conductive pipe? instead of pvc? hace you tried putting one coil inside the other? pvc could be generating a Magnetic field thats changing the voltage. with one coil inside the other keeping the coils spaced from each other at about 1/8 of an inch. just my 2 cents worth.

[petehall347]

have you tried connecting headphones ? this is much like radios i used to build when i was 10 years old

[INVENTOR3]

@petehall347 Yea, unfortunetly did not work, even with weakest, made in china, single earphone. Im back on this project now,,,so i hope to have good results soon.

[saracomm]

Your experiment is actually getting energy waves from Cell phones, power lines, radios and TV stations and even satellites.

Have you tried to install or move your "antenna" to the roof? or as high as you can on some utility pole or street light???

If you do, I think You'll be surprised - But watch out for the high voltage spikes.

[INVENTOR3]

@saracomm where this particualar devise is collecting its energy from, has yet to be proven. I will try to get higher in the near future,,,i know he potential goes up greatly at 50 to 80 feet, and im at 41 :-(

[cris23dumi]

i'd try to connect my coper wire to a train for example or a car or ground wire in my house or something like that pls tell me ur results after doing that :) if it wouldnt burn ur capacitors or diodes than its a lost cause from my part

[cris23dumi]

84 volts k but whats the amperage ? for 10 ma ud have 0.84 watts so its anough for something as small :) ive been looking myself for some germanium diodes but didnt find any :(

[INVENTOR3]

@cris23dumi lots of voltage , but little amps and power. Im doing more experiments with it now.

I get germanium diodes from mouser dot com

It is important to find diode that has smallest current rating.

[saheishshan]

you are so dedicated!.... with respect!

[INVENTOR3]

@saheishshan Thank you so much,,it means a lot to me. I have done literaly hundreds of experiments with this devise alone.

[azkeyz]

Looks to me like you need to increase the diameter of your copper ground core rod.

You don't have to listen to me just because I'm an IEEE engineer born in the same month as tesla.

[INVENTOR3]

@azkeyz Im listening good :-)

Yes, i agree, bigger core diameter,,,,,thanks, i will try this. Im back on this project now,,,new videos coming soon i hope(depends on experiment results). I did try a copper tube with the winding directly on it,,,but no good,,,it needs the PVC insulation.

[dwoods271]

SHOW ME IT LIGHT A LIGHT BULB!! ???

[INVENTOR3]

@dwoods271 Hehehehe, i feel the frustration,,,,im working on it....i hope soon to light a bulb..

[obiwan177]

@INVENTOR3 How much amperage are you getting?

[TheDaikashido]

when you say it works best with the ground pipe at the front of the coil...I'm wondering where north is relative to that?

[INVENTOR3]

@TheDaikashido well, i meant it works best with ground pipe, straight up against the inside wall of the coil, does not matter what side,,hmmm, or does it,,,i did not check other sides.  we are looking south in the video , facing the fence,,looking away from the fence is north. I have ground pipe to the north side of the coil.

[trapingman]

solder all of your connections it will conduct better

[INVENTOR3]

@trapingman Thanks,,,i did wind up soldering all connections :-)

[hydrogenisagas]

What happens when you hook up a load...like a light bulb.

[immytown]

@hydrogenisagas or a trickle charge controller to a battery

[jams2175]

Hi inventor3,Firts let me give you my contratulations by your effort and initiative regarding this matter, I was looking for the blue print circuit and I can not find it,I will try to replicate your experiment here in Dominican Republic and using some idea that I have to increase the voltage and current ,can you show the blue print of the circuit used?

JAMS2175 

[INVENTOR3]

@jams2175 make sure to watch the "free energy circuit HOW TO" part 21 to 24 i think.

some drawing here, bottom of page.... paulslab dot blogspot dot com

Thanks for the compliments!

[Griffith181]

Im sure you have been asked this many times.

But what gauge Copper wire are you using?

[INVENTOR3]

@Griffith181 No problem. .034 dia, i forget what gauge this is, i want to say 20g or 21g, ,i am sure of the dia.

plus it is double dipped varnish/laqure type coating so it actualy measures .0344 dia. single coating should work fine though.

[INVENTOR3]

Hmmm, interesting.

i will check this out.

if you get a chance...send me some links, thanks.

3 more videos out now :-)

[FiniteTuning]

Just a couple of quick questions: What is your "AC" voltage reading (without circuit) between aerial and ground? Then, what is the reading between aerial and coils with no ground attachment? Meaning the coils inductively become ground.

Thank you.

[INVENTOR3]

No problem....

i will look back at my notes and let you know what AC is with no circuit.

reading between arial and coils with no ground i will have to test.

i did notice that ground has less of effect with coils added.

i will get back to you ASAP with this info.

[INVENTOR3]

it may have to wait untill this next weekend. I will have to check these readings. I will let you know for sure,,,i will not forget.

[INVENTOR3]

im trying to remember the newman motor.

was it the one that runs on low current....i will look it up again.

Hmmm, SEC sounds familiar also....what does that stand for....i will look this up also. I see many videos out there on this circuit....i will check it out...looks interesting.

Thanks.

[marthale7]

Looks like a good candidate for a Newman motor with that high voltage. could be your are duplicating a SEC. If you look at DR stifflers work you will see that tuning is a bear with it,.

Cheers!

[crimberland]

Thats really weird... i remembered watching your vid when it went over 100 volts. Its a shame you cant get funded then you could check humidity,temperature, ozone, ions and all that other good stuff. I did an experiment like this a while ago but it was with pyramids, i noticed my voltage would go haywire after a lightning storm or when one was approaching. Just out of curiosity are you going to try this with a load and a joule thief. Always interested in what your doing... good work as always.

[INVENTOR3]

yes, would love to have a sponcer.

i will get voltage back up there.

i been checking temp and humidity all the time, but im always making so many changes that it is to hard to tell if weather conditions are effecting it yet, untill i keep same set up for a while. Yes, stormy weather...more static in the air...but i dont think im picking up static elec.

i will be checking power with load soon.

Yes,,i will definetly look into the joule thief circuit yet. Thanks for comments.

[INVENTOR3]

***ATTENTION***

All coments welcome on his one please.

Strange what is going on here.......

Why would it make a differance as to exactly where the copper pipe is located inside of the coils????

Hmm, wood at bottom??? position of wires coming in & out of coils??? Ground pipe being towards antenna???

(hard to believe that dad is 73 years old)

[FiniteTuning]

My guess is, you have a basic air variable inductor. If the coils touch anything it will cause a mechanical dampening affect, but changing the position of the coils will change it's magnetic affect. All of which relates to resonance, both mechanically and electrically.

The problem is, how to tune this system to gain power on demand. Bifilar coils would be my thought.

By the way, nice work!

[INVENTOR3]

Hmmm, yes, interesting.

Yes, my big thoughts....how to fine tune it now.

Yes, i keep thinking about the bifilar, rodin, and joule thief.

I think that the bifilar would definetly help in tuning.

Thanks. More experimenting today!!!

i look forward to this all week :-)

[FiniteTuning]

If you can build a Rodin coil, your a better man then me :). But I mentioned the bifilar coils for their additive affect, more then tuning. You already have the ultimate joule thief! At this point, I would think you could tune somewhat with just a variable capacitor, or maybe a series of them. Also, if you can store this energy in much larger capacitors and then tap the cap with short pulses, you'll have the amperage you need to run most anything.

[INVENTOR3]

Hmmm, sound good.

Bifilar..more than tuning...you think maybe they will increase voltage and current or...?

I like idea of variable caps...i will try variations of caps next.

I HAVE BEEN GETTING SOME GOOD SPARKS FROM THE CIRCUIT, ABOUT EVERY 20 TO 30 SEC TO BUILD UP.

Yes, tap the large cap with small pulses....i like idea very much.

appreciate the comments, thanks.

3 more videos out now :-)

[FiniteTuning]

The bifilar coil can increase both voltage and amperage depending upon how it's wired into a circuit. Just think of a transformer. Once the magnetic field is established, you can tap that field all day long and never deplete it's source. In this sense, it's pure magnetic induction, not electrical induction. I think you will find this system is currently working on magnetic principles, it's the difference between two potentials that cause an electron flow.

[FiniteTuning]

If you wire a bifilar coil like a Tesla "pancake" coil, you will see a voltage increase. The field of one conductor strengthens the field of the other. Again, depending on how it's wired. You can also gain twice the added capacitance within the coil, therefore another additive effect will be noticed. Pancake coils are a pain in the ass to build, but they seem to work better with magnetic fields verses tubular tower coils. That's what I have seen, but your results may differ.

[INVENTOR3]

Thanks.

yes, working on magnetic pricipals, i agree.

[TheKaos90]

@INVENTOR3 No , actually it sems that the Earth behaves like a spheric capacitor. The ionosphere is charged by the moon and sun and cosmos with negative charge , and the ground we sit on is positively charged. apparently this antenna is more efficien whene it is longer than 6 feet ; you get more and more power

[INVENTOR3]

@TheKaos90 Longer and higher the antenna , the better.