LINK amazon.de/exec/obidos/ASIN/B0063CKGNA/electronic-de-cat-21
Camcorder
PANASONIC GARANTIE
Mit der Lumix DMC-TZ20 von Panasonic ist einfach alles drin. Diese Kompaktkamera verfügt über einen 14,1 Megapixel starken CMOS-Sensor, ein 24-mm-Weitwinkelobjektiv und sogar einen 3D-Fotomodus! Hierfür speichert die TZ20 zwanzig Fotos in Folge, wählt davon die besten zwei aus und setzt ...
Fur weitere Informationen, kopieren Sie bitte den Amazon Link oben in Ihrem Browser
LINK amazon.de/exec/obidos/ASIN/B0076H0ZNW/electronic-de-cat-21
Camcorder
PANASONIC GARANTIE
Panasonic hat die kompakte und robuste Lumix DMC-FT3 herausgebracht,eine 3D-Digitalkamera, wasserfest bis 12 Meter und Weitwinkelobjektiv von 28 mm. Eigenschaften der FT3Sensor CDD von 12 MegapixelnSturzsicher bis zu 2 MeterLEICA Objektiv4,6 fach optischer ZoomFarbfilter, Szenemodi und Video ...
Fur weitere Informationen, kopieren Sie bitte den Amazon Link oben in Ihrem Browser
Two problems: one of the screws on my camera would not come out. I finally stripped it & was ready to smash the camera. Then I took an old etching needle, very sharp & very strong, & managed to excavate around the screw and then push it around from the tiny edges, like doing surgery on a gnat. Second: my screen replacement did NOT have adhesive film on either side as shown. In trying to get the non-existent film off I chipped the glass corners a bit. Otherwise I did as shown and my camera works!
Thank you. and I also got the screen that needs the metal casing on the screen transferred, thank you SeeMoreKelly. Patience and this video saved me money and my great little camera.
Very useful. Many Thanks. Work fine. Bought on ebay at $22.00. Call Panasonic repair shop in Canada, would charge me $147.00 for part + labor !!!!. Took me 1 hour to repair myself. You must take your time, don't rush anything. Use a large table and strong light. Must have the proper tool. Not suitable for someone with very big finger as part are very small.
Buy this guy's screen, I just got one from elsewhere and had to pull a very thin metal casing off the screen to put on the new one(incredibly easy to bend this and make unusable). The screen he shows in this video has its own included, SAVE YOURSELF THE HASSLE.
great video... you are truely quick with those fingers!
FYI my replacement screen did not come with the metal bracket over the glass panel so I just removed the one from the broken panel, worked like a charm.
Dude..Almost see ur face from the mirror part of ur LCD replacement :) I dun care if u uploaded this vid to show off...It seemed more to help people coz it helped me saved $170-200++ SGD from sending my Lumix to camera hospital or Panasonics! Ordered the part from HongKong over Ebay at $33..it came within 7 days instead of the said 14-21 days..Then this evening I got it fixed! :D I'm jus a girl who NEVER attempted nitty gritty electronic stuff b4. Vielen Dank! Add me on fb? mswendytan@gmail.com
I will not make repair by so nervous and awkward: the tools are constantly likely to skid and stripe the screen; a large number of gestures does not compensate for their approximation. It can repair wheelbarrows, plow, but never fine technologies, its success rate must be 70% only…
Je ne ferai pas réparer par un si nerveux et maladroit : les outils risquent à tout moment de déraper et de rayer l'écran; le grand nombre de gestes ne compense pas leur approximation. Il peut réparer des brouettes, des charrues, mais jamais des technologies fines, son taux de réussite doit être de 70% seulement...
By the way, about the tools, in my screen did not come with it as in some others, but just buy a PRECISSION SCREWDROWER in any shop, i took the one used by the clock men and really did well. Go for a good one, the cheaper do nothing, you con't be able to take even one screw!! forget to buy it at a "all 1€ shop" they are really bad and you'll have to spend money again. One good and you'll have it forever :) with about 10 € you have a buch of sizes and types.
Great video, the LCD came in 2 days and i got to fix it thanks to the video!! Now I'm ready for the next trip and do not need to buy a new camera + submarine housing which would have been a big spent!!
Carefull with all, but it si easy, i'm not the one to usually do this things and could do it with no pains... In less than half an hour brand new screen! (Needed to pause the video as he goes sooo fast, but no problem at all)
Thanks dude, this makes Internet a great thing for all of us!!
Does anyone know where to get a new mounting rack (in which the LCD fits)? The small connector broke, so now I've got a fixed LCD, but the connector is broken.
BE EXTREMELY CAREFUL WHEN CONNECTING THE SMALL CONNECTOR!!!
Freaking excellent! I destroyed the screen to my husband's Lumix and he was really pissed. Thanks to this vid I fixed it and it works great now! Thanks so much for posting this for us!
Worked a charm. Bit of a problem with the screws as I managed to strip one. Realised later that only the back screws needed taking off. Had a bit of trouble with the wire tape until i figured out that it went under the white piece. Picked up the screen through the states.
Thanks a million for posting this very well put together video.
Same here . Excellent video . I only had a couple of snags , the first being the new LCD screen supplied did not have a protective film ( I spent a little while figuring this out ) . The other was the fiddly small cable , it needs a bit of a push to make the correct connection . Really helped though. Thank you
Thank you SOOOOOOOOO much, zweige9 :) Just got my camera going again watching this - YOU ARE A GENIUS! Now having a beer and feelin PRETTY pleased with myself! Danke!
IT took me a lot more time than this guy, he is a pro!. About an hour of being very careful. My LCD did not come with the protective film . I had a few screws that just would not come out. I had to drill the heads off. The LCD that I purchased for $35.00 Worked great! I could not have replaced the part with out this video ( Lumix DMC-ZS3. ) I saved $120.00 Thank you!
Was gonna chuck my beloved camera until I saw this video, £20 for a new screen and just installed it myself..nerve wracking but it worked, so delighted. Thanks!
frage: kann ich einen beliebigen sensor in meine kamera einbaun?
ich hab nämlich ne ältere bridge kamera mit 2 mp, hab aber noch ne digi kompakt cam mit 6 mp, beide hersteller olympus.
wäre es theoretisch möglich den sensor der 6 mp camera deren display leider kaputt ist, in die 2 mp bridge cam einzubauen, oder muss jeder sensor mit dem rest der kamera iwie kompatibel sein? die bridge-cam is echt top, war auch mal richtig teuer, nur ich dachte mit 2 mp isses weng mau..bitte um antwort! thx
Thanks zweige9 camera all fixed, cheap cheap! My camera was dead for 1 year, was going to cost more to get it looked at than to buy a new one. Now its perfect. Cheers!
The only thing to be carefull of is if you get a screen from ebay thats not original it probably wont have the protective films over screen so just skip the part where you peel them off.
Wonderful stuff. I had to remove the fine aluminium frame from the old screen as my new one did not have one. Howver managed and it works , though there are a few fingermarks. I am so pleased. Thanks amillion dude. Tweezer work is a bit suspect
Got the new screen, installed it but it was very difficult to put the various screen layers together and once I'd finished it was a new broken screen :-(( Bummer - now to buy another one and try again more carefully.
OK, I get it - the screen is opaque till it gets power, then the light shines through.
Clearly, then, I have a problem with my light. I did the job carefully, according to the video, but I may have damaged the cable somehow - though it looks OK.
I just did mine, but there's no light. I presume the small cable powers the light, but the screen is opaque, so the light can't shine through it - so how does it work? Is there an electrical contact between the part that is powered by the small cable and the screen, or is the small cable for something else, and the screen replacement has a light inside of it?
I replaced the screen, but now it's only got power but shows no image. Might that be due to a bad signal of the smaller connection? If so, is there a way to fix or replace this?
Hi this is great! Just a quick query, I just bought the latest model -ZS7 and less than 2 wks of usage, my husband accidently cracked the LCD screen. I want to replace the screen by myself but couldn't find the exact LCD screen so can anyone please advise whether does ZS3 LCD compatible with ZS7? Thanks!
Thank you very much for the video, it was very usefull. I only needed to change the thin frame around the spare part as it didn't have it on. so I removed form the old and attached it easily but carefully on the spare. around the 3:00' minute that is...
Thank you so much for posting this video! bought my screen for £36 from ebay. literally takes 10 minutes to replace! well worth it, especially when panasonic wanted £150 to replace it! cheers again.
smashed my screen few weeks ago and have just received my new screen from ebay ( £40 inc. postage) was quoted £170 to fix my camera - will be replacing it tomorrow - thank you
My TZ7 lcd screen cracked just like the one the this video, so happy that its easy to replace, going to buy a replacement today. Thanks zweige9 for this video :-)
Thanks! I used your vid to change my screen!
jasrho00 1 day ago
LINK amazon.de/exec/obidos/ASIN/B0063CKGNA/electronic-de-cat-21
Camcorder
PANASONIC GARANTIE
Mit der Lumix DMC-TZ20 von Panasonic ist einfach alles drin. Diese Kompaktkamera verfügt über einen 14,1 Megapixel starken CMOS-Sensor, ein 24-mm-Weitwinkelobjektiv und sogar einen 3D-Fotomodus! Hierfür speichert die TZ20 zwanzig Fotos in Folge, wählt davon die besten zwei aus und setzt ...
Fur weitere Informationen, kopieren Sie bitte den Amazon Link oben in Ihrem Browser
HerkelmannVikt8380 2 days ago
LINK amazon.de/exec/obidos/ASIN/B0076H0ZNW/electronic-de-cat-21
Camcorder
PANASONIC GARANTIE
Panasonic hat die kompakte und robuste Lumix DMC-FT3 herausgebracht,eine 3D-Digitalkamera, wasserfest bis 12 Meter und Weitwinkelobjektiv von 28 mm. Eigenschaften der FT3Sensor CDD von 12 MegapixelnSturzsicher bis zu 2 MeterLEICA Objektiv4,6 fach optischer ZoomFarbfilter, Szenemodi und Video ...
Fur weitere Informationen, kopieren Sie bitte den Amazon Link oben in Ihrem Browser
KoetherWilh8279 2 days ago
Two problems: one of the screws on my camera would not come out. I finally stripped it & was ready to smash the camera. Then I took an old etching needle, very sharp & very strong, & managed to excavate around the screw and then push it around from the tiny edges, like doing surgery on a gnat. Second: my screen replacement did NOT have adhesive film on either side as shown. In trying to get the non-existent film off I chipped the glass corners a bit. Otherwise I did as shown and my camera works!
kipperedsnack 4 weeks ago in playlist Liked videos
THANK YOU SO MUCH! WE FOLLOWED YOUR INSTRUCTIONS AND FIXED OUR CAMERA! PHEW FINALLY THE NIGHTMARE IS OVER! THANK YOU SOOOOOO MUCH!
flowersnb 1 month ago in playlist Favorite videos
Thank you. and I also got the screen that needs the metal casing on the screen transferred, thank you SeeMoreKelly. Patience and this video saved me money and my great little camera.
careymitsu57 2 months ago
Thank you ;)
silverfox690 4 months ago
Very useful. Many Thanks. Work fine. Bought on ebay at $22.00. Call Panasonic repair shop in Canada, would charge me $147.00 for part + labor !!!!. Took me 1 hour to repair myself. You must take your time, don't rush anything. Use a large table and strong light. Must have the proper tool. Not suitable for someone with very big finger as part are very small.
skiprocanada 4 months ago
hi from greece!!!thank u for the help.u just save me more than 100 euros.thank u very much!
byrontzis 4 months ago
Buy this guy's screen, I just got one from elsewhere and had to pull a very thin metal casing off the screen to put on the new one(incredibly easy to bend this and make unusable). The screen he shows in this video has its own included, SAVE YOURSELF THE HASSLE.
SeeMoreKelly 5 months ago
Excellent! I tried a cheap ebay screen, which failed. Then tried yours. Though a bit more expensive, works like a charm :-)
Ongelofelijk15000 5 months ago
great video... you are truely quick with those fingers!
FYI my replacement screen did not come with the metal bracket over the glass panel so I just removed the one from the broken panel, worked like a charm.
tweebs1 6 months ago
Thanks, just replaced my screen!
XmnwildX12 6 months ago
Dude..Almost see ur face from the mirror part of ur LCD replacement :) I dun care if u uploaded this vid to show off...It seemed more to help people coz it helped me saved $170-200++ SGD from sending my Lumix to camera hospital or Panasonics! Ordered the part from HongKong over Ebay at $33..it came within 7 days instead of the said 14-21 days..Then this evening I got it fixed! :D I'm jus a girl who NEVER attempted nitty gritty electronic stuff b4. Vielen Dank! Add me on fb? mswendytan@gmail.com
mswendytan 7 months ago
I will not make repair by so nervous and awkward: the tools are constantly likely to skid and stripe the screen; a large number of gestures does not compensate for their approximation. It can repair wheelbarrows, plow, but never fine technologies, its success rate must be 70% only…
lauriou2 8 months ago
Je ne ferai pas réparer par un si nerveux et maladroit : les outils risquent à tout moment de déraper et de rayer l'écran; le grand nombre de gestes ne compense pas leur approximation. Il peut réparer des brouettes, des charrues, mais jamais des technologies fines, son taux de réussite doit être de 70% seulement...
lauriou2 8 months ago
By the way, about the tools, in my screen did not come with it as in some others, but just buy a PRECISSION SCREWDROWER in any shop, i took the one used by the clock men and really did well. Go for a good one, the cheaper do nothing, you con't be able to take even one screw!! forget to buy it at a "all 1€ shop" they are really bad and you'll have to spend money again. One good and you'll have it forever :) with about 10 € you have a buch of sizes and types.
viajarsolo 8 months ago
Great video, the LCD came in 2 days and i got to fix it thanks to the video!! Now I'm ready for the next trip and do not need to buy a new camera + submarine housing which would have been a big spent!!
Carefull with all, but it si easy, i'm not the one to usually do this things and could do it with no pains... In less than half an hour brand new screen! (Needed to pause the video as he goes sooo fast, but no problem at all)
Thanks dude, this makes Internet a great thing for all of us!!
viajarsolo 8 months ago
Does anyone know where to get a new mounting rack (in which the LCD fits)? The small connector broke, so now I've got a fixed LCD, but the connector is broken.
BE EXTREMELY CAREFUL WHEN CONNECTING THE SMALL CONNECTOR!!!
thanks
MrHensene 8 months ago
Ihr seid genial!
Ich habe Euch nur zu spät entdeckt. Nach dem nächsten "Unglück" bestelle ich bei Euch!
Vielen Dank für die Anleitung!
UmbertoKo 8 months ago
Great!! I was wondering if i should by a new one but they are no more on the market, and now I'll order and replace the LCD million thanks!!!!
just a quiestion... anyone knows the exact size/tipe of screws used??
viajarsolo 8 months ago
Freaking excellent! I destroyed the screen to my husband's Lumix and he was really pissed. Thanks to this vid I fixed it and it works great now! Thanks so much for posting this for us!
Terabithia 8 months ago
Thank you very much!!
BluesMan2 8 months ago
Thanks a lot for this great video which avoided me to spend money for yet-another-numeric-camera !
I bought the screen on ebay and it took me something like 20 minutes to replace the screen.
Problems I had:
- one screw really difficult to remove
- one screw lost on the floor (but found using a magnet !)
- small connector not easy to plug in
I would advise people to operate on a white cloth (this avoids the second problem).
Encore merci
-- Olivier
obernard75 9 months ago
@obernard75 can you send me the link for ebay i need it to buy it too!
btw you got the original, cause i know there lots of fakes on ebay. thanks in advance
ynon1 8 months ago
Thank you so much for this video!!
buenos84 9 months ago
Worked a charm. Bit of a problem with the screws as I managed to strip one. Realised later that only the back screws needed taking off. Had a bit of trouble with the wire tape until i figured out that it went under the white piece. Picked up the screen through the states.
Thanks a million for posting this very well put together video.
vashby1 9 months ago
Same here . Excellent video . I only had a couple of snags , the first being the new LCD screen supplied did not have a protective film ( I spent a little while figuring this out ) . The other was the fiddly small cable , it needs a bit of a push to make the correct connection . Really helped though. Thank you
Tiltmaster2011 9 months ago
Thank you SOOOOOOOOO much, zweige9 :) Just got my camera going again watching this - YOU ARE A GENIUS! Now having a beer and feelin PRETTY pleased with myself! Danke!
Presumin0Ed 9 months ago
hello
is the Panasonic Lumix TZ7 the thame display as Panasonic Lumix TZ8?
please help me
thanks
204domi 9 months ago
IT took me a lot more time than this guy, he is a pro!. About an hour of being very careful. My LCD did not come with the protective film . I had a few screws that just would not come out. I had to drill the heads off. The LCD that I purchased for $35.00 Worked great! I could not have replaced the part with out this video ( Lumix DMC-ZS3. ) I saved $120.00 Thank you!
pcrhkr 9 months ago
Thank You So much £25.00 and I've got our TZ7 back.
evianstreet 10 months ago
Was gonna chuck my beloved camera until I saw this video, £20 for a new screen and just installed it myself..nerve wracking but it worked, so delighted. Thanks!
nerp23 11 months ago
This has been flagged as spam show
frage: kann ich einen beliebigen sensor in meine kamera einbaun?
ich hab nämlich ne ältere bridge kamera mit 2 mp, hab aber noch ne digi kompakt cam mit 6 mp, beide hersteller olympus.
wäre es theoretisch möglich den sensor der 6 mp camera deren display leider kaputt ist, in die 2 mp bridge cam einzubauen, oder muss jeder sensor mit dem rest der kamera iwie kompatibel sein? die bridge-cam is echt top, war auch mal richtig teuer, nur ich dachte mit 2 mp isses weng mau..bitte um antwort! thx
iwannabeyourdog90 11 months ago
hey this is a great vid cheers for posting what size screw driver are the Phillips screws i seem to have some trouble finding the right ones
cheers x
irishjoe1987 11 months ago
Comment removed
irishjoe1987 11 months ago
Thanks zweige9 camera all fixed, cheap cheap! My camera was dead for 1 year, was going to cost more to get it looked at than to buy a new one. Now its perfect. Cheers!
The only thing to be carefull of is if you get a screen from ebay thats not original it probably wont have the protective films over screen so just skip the part where you peel them off.
laconic26 1 year ago
Nice Job, Thanks.
I see the ebay link to acquire new screen.
Is this an OEM part or ? wvvw.chip-tip.d e
I have various surgery tools to make it easy.
Reviews at dpreview of non OEM show rough quality.
Philscbx 1 year ago
A million thanks.. fixed up my display watching this.
mefranzi 1 year ago
Wonderful stuff. I had to remove the fine aluminium frame from the old screen as my new one did not have one. Howver managed and it works , though there are a few fingermarks. I am so pleased. Thanks amillion dude. Tweezer work is a bit suspect
forresttravis 1 year ago
Got the new screen, installed it but it was very difficult to put the various screen layers together and once I'd finished it was a new broken screen :-(( Bummer - now to buy another one and try again more carefully.
fasteddiegr 1 year ago
Thanks for this video. I ordered the replacement lcd and replaced it with no problems. Thanks again.
xchequer 1 year ago
OK, I get it - the screen is opaque till it gets power, then the light shines through.
Clearly, then, I have a problem with my light. I did the job carefully, according to the video, but I may have damaged the cable somehow - though it looks OK.
DownhillAllTheWay 1 year ago
I just did mine, but there's no light. I presume the small cable powers the light, but the screen is opaque, so the light can't shine through it - so how does it work? Is there an electrical contact between the part that is powered by the small cable and the screen, or is the small cable for something else, and the screen replacement has a light inside of it?
DownhillAllTheWay 1 year ago
Danke! With this video I replaced the screen without any dificulties. However it was quite exciting... and sweat a lot! ;-)
Heyjijdaar81 1 year ago
@Heyjijdaar81
me too!!!! juuust like you lol! he took 7 mins and I took 30 :D Greetings from Argentina!!!
mshatski 1 year ago
I replaced the screen, but now it's only got power but shows no image. Might that be due to a bad signal of the smaller connection? If so, is there a way to fix or replace this?
kirihitiana 1 year ago
Thanks! My camera now lives to see another day.
fysh3 1 year ago
Works great !!! Thanks so much...
I bought a TZ10 thinking it was at least as good as my broken TZ7 but it ain't
(horrible sound on the videos)
My TZ7 is now back and in good shape, thanks to you !
:)
Nafoute 1 year ago
Great video... I dropped my TZ7... and the screen is broken. The shop said repair will cost 200 euro. But looks like i can do it myself!
Heyjijdaar81 1 year ago
Super !! absolument essentiel pour faire le changement d'écran. Merci
setiaum 1 year ago
Vielen Dank für dieses interessante Video :)
Daisy0245 1 year ago
i find it so difficult to unscrew the camera..=(
tuyenp 1 year ago
Thanks so much brilliant video i fixed it in 30 minutes and the shop told me to buy a new camera, dankeschoen mein herr and now its time for a beer
markson1ine 1 year ago
Very Helpful. Thank you very much! Sehr hilfreich. Vielen Dank!
bookmarkm 1 year ago
Thanks man, that was very helpfull.
tomaszchrulski 1 year ago
This has been flagged as spam show
@tomaszchrulski
Try to find the accessories parts and then repair it yourself with cheaper price.
Has a look on g-plushk. com
gplushk 1 year ago
Super Anleitung, Funktioniert tadellos, Display innerhalb von 3 tagen nach Österrech geschickt bekommen! ca. 200€ für eine neue Kamera gespart!!!
Einzig benötigtes Werkzeug: PH000 oder PH00 Schraubendreher!
Arpa134 1 year ago
This has been flagged as spam show
Try to find the accessories parts and then repair it yourself with cheaper price.
Has a look on g-plushk. com
johnnyhs321 1 year ago
Comment removed
Arpa134 1 year ago
You have to buy the micro-tools too.
xp6driver 1 year ago
Really helpful video. Thanks so much!
l31007 1 year ago
Thanks a million. You saved me £110 for repair. I got the part and followed your instructions. It works great. many many many thanks. Keep it up.
bamlani 1 year ago
thanks from italy, i'll think of you when i'll spend 110 € in beers instead of camera shop
0goldrake0 1 year ago
Awesome, woke up this morning and I guess my wife founf my camera on the floor. Needless to say I have lines across my LCD now.
Tintamar5678 1 year ago
MILLE GRAZIE DA ITALIA
30€ (4 the new screen) and the camera is again brand new
THANK YOU SO MUCH
:-))))
AxDCjr 1 year ago
Hi this is great! Just a quick query, I just bought the latest model -ZS7 and less than 2 wks of usage, my husband accidently cracked the LCD screen. I want to replace the screen by myself but couldn't find the exact LCD screen so can anyone please advise whether does ZS3 LCD compatible with ZS7? Thanks!
sexxymummy 1 year ago
Fantastic. Thanks! My screen just cracked today and was afraid I'd have to buy a new camera.
aspri 1 year ago
Thank you very much for the video, it was very usefull. I only needed to change the thin frame around the spare part as it didn't have it on. so I removed form the old and attached it easily but carefully on the spare. around the 3:00' minute that is...
stasyn 1 year ago
that's for the demonstration....really appreciate it!! and my camera is now very happy...hehe
lkboon 2 years ago
Please could you tell me the make/model/size of the screwdriver that you used to remove the outer screws.
happysparks1 2 years ago
thanks!!!!just saved 100 euro!!!!
karalrs 2 years ago
Cheers man, girlfriend dropped hers on new years eve, she'd only had it a month.
Got the screen from ebay, fixed it with your help!
IrishPhill 2 years ago
Thank you so much for posting this video! bought my screen for £36 from ebay. literally takes 10 minutes to replace! well worth it, especially when panasonic wanted £150 to replace it! cheers again.
aarondruce 2 years ago
Awesome video
a screen for 40 quid off ebay and it was sorted in no time :)
IotasAdvent 2 years ago
i got mine off ebay uk it came from japan but worked perfectly
kyotta1 2 years ago
can some 1 tell me where i can buy one of theses screens cheaply
johnjohnklguy1232 2 years ago
wonderful video...very useful! I love it!
robcaput 2 years ago
smashed my screen few weeks ago and have just received my new screen from ebay ( £40 inc. postage) was quoted £170 to fix my camera - will be replacing it tomorrow - thank you
kyotta1 2 years ago
Comment removed
johnjohnklguy1232 2 years ago
So did i...you are my hero. ;o)
sheriffen123456 2 years ago
Just replaced the LCD screen to my TZ7, thanks for the vid zweige9.
sibthorpe 2 years ago
This video is very helpful. Thanks a lot. I was able to install the LCD by my self.
peruflower 2 years ago
My TZ7 lcd screen cracked just like the one the this video, so happy that its easy to replace, going to buy a replacement today. Thanks zweige9 for this video :-)
sibthorpe 2 years ago
Comment removed
sechs59 2 years ago
This is a great help, I switched on my camera today to find the LCD cracked and beyond repair.
I will order a new screen confident in the knowledge that I can replace it with the help of this tutorial.
Thank you Zweige9
;)
KenfromDublin 2 years ago