Shipping depends on where you are located in Canada. You can use our live chat on LEDGlow . com or contact a Customer Service Specialist at 1.888.LED.Glow and they will be more than happy to give you a shipping quote. If you have any other questions just ask!
Sorry, what I meant was, Is the installation the same step or more different? If it is different, can you guys(ledglow staff) make a step by step video for it just like how you guys did it for this one?
The installation is virtually the same, if you have any questions while you installing or before you can call our Tech Specialists at 1.888.LED.Glow and they will be more than happy to help! Let me know if you have any other questions.
Due to the large size of the truck this kit would not illuminate the entire truck, but we do offer Truck underbody kits that will. you can find them at LEDGlow . com on the left hand column under Truck lighting. If you have any other questions or concerns just ask!
i bought a 7 color kit from u guys and now its been a year and one month and my red neon is out on driver side plus play box is crossing colors for inside set up. do i have to order new set or can i get exchange.
Send your contact information and the best time to get a hold of you to jason@LEDGlow.com, and I will have a Tech Specialist get in contact with you! Let me know if I can do anything else for you!
The cost varies and depends on the installer. You can take it to virtually anywhere that works on cars. I would just call around and get some quotes, it shouldn't be to expensive. If you need anything else just ask!
I have bought a wireless led neon kit for my car there is a red wire(power) a black wire(ground) and a yellow wire and i cannot figure out its purpose, could someone enlighten me?
We do offer wheel well kits that are designed to install to your vehicles fender well. We are in the process of filming new installation videos so please stay tuned.
what do u recomend to do if your engine is designed where u cant see anywhere to run the wire through the firewall or not enough space to make your own hole in the firewall? i have ran wire amp wire through my fender, through the door jam then down under the carpet and so on but would this void warranties? my amp wire is 8 guage and it doesn't get crushed or anything so would it be ok to do this? and the wire doesnt even get wet in the rain
As long as the wire isn't getting pinched or cut you should be absolutely fine. If you have more vehicle specific questions, give your tech dept a call at 1.877.LED.Glow and they will be more then happy to help you out.
i got a ford f-150 truck... is the wire long enough to reach to every spot and where everything has to be located at? if not then after i order it can i return it?
The wires should absolutely be long enough. Two 48 inch tubes and one 36 inch tube include 13 feet of power wire, and the rear tube includes 18 feet of power wire, so you should be absolutely fine. If you have any other questions just ask!
@ledglow so it comes with two 48" tubes and one 36" ??? or u mean two 36" tubes??? either way i had kinda got my friends tube and kinda hold it on the back and pulled it fowrd, seems like its long enough but just really wanted to make sure... but thanx for the info. bro.
im getting i think the slim series from you guys i think tmrw, does the slim series also come with all the mounting brackets aswel and the screws? and how many feet of wire run from the bulb to where they r connected? how water tight are they? should i put somethin around the caps to help prevent water from entering the tube? if i run it hard wired from the battery it will turn on n off from the controlle panel whenever i want n not just stay on constantly correct?
The slimline kit does include everything you need to install it, and the tubes are water resistant. If you want to be extra cautious you could put a bead of silicon around the end caps for a little extra security. The slimlines are a little easier to install as opposed to the wireless kits. All you need to do is power the on/off switch and the underbody tubes just daisy chain off of that. If you have any other questions just ask!
Absolutely. This kit inciudes two 48 inch tubes for the driver and passanger sides and two 36 inch tubes for the front and back. Check out our favorites on our channel and you will see mustangs illuminated with our kits. Any other questions just ask!
Ive watched your videos 3 or 4 times and i want to be sure of just one thing. Will i be able to turn these lights on AND OFF while driving, if so, is there a certain circuit i should connect the red wires too? I'm sorry if this is a stupid question.. im not very electronic friendly i just dont want to get tickets. I will be trying this on a 2008 charger i hope i have enough slack.
You can absolutely turn the kit on while you are driving. You can do this by using your wireless remote, or the power button that is located directly on the control box. You will have plenty of wire length when installing this, just make sure that when you are installing the rear tube, you are using the one with 18 feet of wire. Any other questions just ask or for specific install questions contact our tech support department at 1.877.LEDGlow
@ledglow im confused on the black wire .. i understand that I can either attatch the red wire to a circuit (although im not too sure why) or i can just hook the wire [red] strait to the positive side of the battery... but what do i do with the black wire? what does the black one connect to? You say ground but what is thatl.
The black wire attaches to any bare metal ground source, and completes the circuit. If you are having difficulties installing this or have never installed anything like this before I would recommend taking it to a professional installer. If any physical damage occurs to the kit due to improper installation it will void the warranty. If you have a specific install question, contact our technical support department at 1877.LED.Glow.
You could take it to any automotive shop for the install or a place that installs car alarm systems, sounds systems, etc. You can also contact our customer service department and they would be able to tell you if we have a wholesaler/installer in your area. Any other questions, just ask!
Yes they could drain the battery, but since this is an LED kit it draws very little power and it would take some time to completely drain your battery.
I've just bought the blue wireless led kit and wondered if i can, instead of making the red positive wire go to the horn can i just put it directly onto the positive terminal of the car battery instead?
I can not closet fuse box with the add-a-circuit because the horn fuse is to close to the exterior of the fuse box. Is there a different fuse you recommend using?
LEDGlow, I bought the 6pc Wireless Million Color LED Underbody Kit with the 4 underbody tubes along the the 2 interior tubes and i bought 2 more interior tubes. How do you install the interior tubes and the underbody together? Is the underbody the same as in this video and the interior just inside the car? Please get back to me! I'm very excited to get these lights. Thanks, Nate.
There is a junction cable for the interior tubes that plugs directly into the underbody control box. You can add up to 6 interior tubes to your underbody kit.
if you are not comfortable with the installation we recommend having a professional install your kit. Damage as a result of improper installation will void our warranty.
I got an add a circuit that says that it only goes up to 10 amps..ive tried using it with 10 amps fuses but when i do, the lights work, but eg the horn dosnt work..im trying to connect it to an empty fuse but im not sure if i can use it with an empty space the goes up to 20 amps...mien is like the one in the video where i can put two 10 amps..please advice
We can absolutely fix this, but i would like to troubleshoot the issue a little more. Could you please contact our technical support department so we can find out what exactly the issue is and how to fix it.
@JoshSetumTV No. The horn will still work because the circuit that he took out is just a "connector". A "bridge". When he put another circuit in, the horn will still work because you just put in another "bridge". =) Do you know what I mean? If not, I will answer any more questions.
@ledglow. What's the cost with shipping to bc Canada. I will order some just don't know where yet
MrTurbomouth 5 days ago
@MrTurbomouth
Shipping depends on where you are located in Canada. You can use our live chat on LEDGlow . com or contact a Customer Service Specialist at 1.888.LED.Glow and they will be more than happy to give you a shipping quote. If you have any other questions just ask!
ledglow 4 days ago
Sorry, what I meant was, Is the installation the same step or more different? If it is different, can you guys(ledglow staff) make a step by step video for it just like how you guys did it for this one?
chengkt09 1 month ago
@chengkt09
The installation is virtually the same, if you have any questions while you installing or before you can call our Tech Specialists at 1.888.LED.Glow and they will be more than happy to help! Let me know if you have any other questions.
ledglow 4 weeks ago
can you guys show a demonstration for the 4 pc wireless ledglow underbody kit?
chengkt09 1 month ago
@chengkt09
What do you specifically mean by demonstration? How the to fully operate the kit? Let me know!
ledglow 1 month ago
@chengkt09
If you have any other questions just ask!
ledglow 1 month ago
About how much would it cost to get a single color kit for a '95 suburban? Is it a special kit with longer tubes that I need?
BigManny94 1 month ago
@BigManny94
Due to the large size of the truck this kit would not illuminate the entire truck, but we do offer Truck underbody kits that will. you can find them at LEDGlow . com on the left hand column under Truck lighting. If you have any other questions or concerns just ask!
ledglow 1 month ago
i bought a 7 color kit from u guys and now its been a year and one month and my red neon is out on driver side plus play box is crossing colors for inside set up. do i have to order new set or can i get exchange.
triumph1226 1 month ago
@triumph1226
Send your contact information and the best time to get a hold of you to jason@LEDGlow.com, and I will have a Tech Specialist get in contact with you! Let me know if I can do anything else for you!
ledglow 1 month ago
How much would it cost to have this installed professionally? I live in california, also what places could install this?
tpolarbeart 2 months ago
@tpolarbeart
The cost varies and depends on the installer. You can take it to virtually anywhere that works on cars. I would just call around and get some quotes, it shouldn't be to expensive. If you need anything else just ask!
ledglow 2 months ago
I have bought a wireless led neon kit for my car there is a red wire(power) a black wire(ground) and a yellow wire and i cannot figure out its purpose, could someone enlighten me?
xHANSENxFTWx 2 months ago
@xHANSENxFTWx
Is this an LEDGlow kit?
ledglow 2 months ago
grate video just one cuestion how can i install a led on the whell?? if you know how please tell me or make a video please. thanks
TheDevil13Sicairos 2 months ago
@TheDevil13Sicairos
We do offer wheel well kits that are designed to install to your vehicles fender well. We are in the process of filming new installation videos so please stay tuned.
ledglow 2 months ago
@ledglow
ok thanks for the information
TheDevil13Sicairos 2 months ago
Does it need to be flashing and colour changing all the time? or can i just choose one colour?
coolmoney11 3 months ago
@coolmoney11
We offer solid and multicolor kits. If you purchase a multi-color kit you can absolutely keep it on one color.
ledglow 3 months ago
@ledglow Oke thanks for the information.
coolmoney11 3 months ago
@ledglow are the bright
tankw1216 3 months ago
@ledglow my caprice sits up pretty high will it b bright enough to shine
tankw1216 3 months ago
We use utilize wide angle LEDs in all of our kits, so you will not have a problem at all.
ledglow 3 months ago
hey can you give a demo on how to put led lights behind the rims( alloy wheels) thankx
amir0138 3 months ago
@amir0138
We are working on new videos, so please stay tuned!
ledglow 3 months ago
can i just connect the red and black wire to the battery with a fuse? how many amps should the in line fuse be?
supersanchez1991 4 months ago
@supersanchez1991
Yes you definitely can just hook it to your battery, and a 10 amp fuse will be more than enough for you. If you have any other questions just ask!
ledglow 4 months ago
what do u recomend to do if your engine is designed where u cant see anywhere to run the wire through the firewall or not enough space to make your own hole in the firewall? i have ran wire amp wire through my fender, through the door jam then down under the carpet and so on but would this void warranties? my amp wire is 8 guage and it doesn't get crushed or anything so would it be ok to do this? and the wire doesnt even get wet in the rain
WARDOG4491 5 months ago
@WARDOG4491
As long as the wire isn't getting pinched or cut you should be absolutely fine. If you have more vehicle specific questions, give your tech dept a call at 1.877.LED.Glow and they will be more then happy to help you out.
ledglow 5 months ago
@ledglow but would it void the warranty?
WARDOG4491 5 months ago
@WARDOG4491
It will only void the warranty if the wires are pinched or cut. If you have any other questions just ask!
ledglow 5 months ago
@ledglow thank you!!! cant wait to install it either sunday or next week
WARDOG4491 5 months ago
whats ata or data circuit
time1288 5 months ago
@time1288
The add-a-circuit allows you to power this kit, directly from your fuse box.
ledglow 5 months ago
i got a ford f-150 truck... is the wire long enough to reach to every spot and where everything has to be located at? if not then after i order it can i return it?
BIGSEXY21O 5 months ago
@BIGSEXY21O
The wires should absolutely be long enough. Two 48 inch tubes and one 36 inch tube include 13 feet of power wire, and the rear tube includes 18 feet of power wire, so you should be absolutely fine. If you have any other questions just ask!
ledglow 5 months ago
@ledglow so it comes with two 48" tubes and one 36" ??? or u mean two 36" tubes??? either way i had kinda got my friends tube and kinda hold it on the back and pulled it fowrd, seems like its long enough but just really wanted to make sure... but thanx for the info. bro.
BIGSEXY21O 5 months ago
@BIGSEXY21O
I do apologize, it does come with two 48 inch and two 36 inch tubes.
ledglow 5 months ago
@ledglow i kinda thought so... i know it might be bussy answering everyones comment... but thanx, around whats the cost for a set? L.E.D. all white.
BIGSEXY21O 5 months ago
@BIGSEXY21O
89.99 for a White Wireless Underbody Kit
ledglow 5 months ago
im getting i think the slim series from you guys i think tmrw, does the slim series also come with all the mounting brackets aswel and the screws? and how many feet of wire run from the bulb to where they r connected? how water tight are they? should i put somethin around the caps to help prevent water from entering the tube? if i run it hard wired from the battery it will turn on n off from the controlle panel whenever i want n not just stay on constantly correct?
bassline123456789 7 months ago
@bassline123456789
The slimline kit does include everything you need to install it, and the tubes are water resistant. If you want to be extra cautious you could put a bead of silicon around the end caps for a little extra security. The slimlines are a little easier to install as opposed to the wireless kits. All you need to do is power the on/off switch and the underbody tubes just daisy chain off of that. If you have any other questions just ask!
ledglow 7 months ago
@ledglow i think thats it, ty for your help
bassline123456789 7 months ago
@bassline123456789
My pleasure!
ledglow 7 months ago
'
if a cop see this LED on the vehicle and will give a ticket to driver
bestamerica 7 months ago
@bestamerica
Laws regarding LED underbody kits vary from state to state. I would contact your local police department for specific laws for your state.
ledglow 7 months ago
is just one set enough for a ford mustang...
BobbyJTV 7 months ago
@BobbyJTV
Absolutely. This kit inciudes two 48 inch tubes for the driver and passanger sides and two 36 inch tubes for the front and back. Check out our favorites on our channel and you will see mustangs illuminated with our kits. Any other questions just ask!
ledglow 7 months ago
Ive watched your videos 3 or 4 times and i want to be sure of just one thing. Will i be able to turn these lights on AND OFF while driving, if so, is there a certain circuit i should connect the red wires too? I'm sorry if this is a stupid question.. im not very electronic friendly i just dont want to get tickets. I will be trying this on a 2008 charger i hope i have enough slack.
WarriorInternationa1 9 months ago
@WarriorInternationa1
You can absolutely turn the kit on while you are driving. You can do this by using your wireless remote, or the power button that is located directly on the control box. You will have plenty of wire length when installing this, just make sure that when you are installing the rear tube, you are using the one with 18 feet of wire. Any other questions just ask or for specific install questions contact our tech support department at 1.877.LEDGlow
ledglow 9 months ago
@ledglow im confused on the black wire .. i understand that I can either attatch the red wire to a circuit (although im not too sure why) or i can just hook the wire [red] strait to the positive side of the battery... but what do i do with the black wire? what does the black one connect to? You say ground but what is thatl.
WarriorInternationa1 9 months ago
@WarriorInternationa1
The black wire attaches to any bare metal ground source, and completes the circuit. If you are having difficulties installing this or have never installed anything like this before I would recommend taking it to a professional installer. If any physical damage occurs to the kit due to improper installation it will void the warranty. If you have a specific install question, contact our technical support department at 1877.LED.Glow.
ledglow 9 months ago
who will i be able to take this to, to install this?
hermitzrock 9 months ago
@hermitzrock
You could take it to any automotive shop for the install or a place that installs car alarm systems, sounds systems, etc. You can also contact our customer service department and they would be able to tell you if we have a wholesaler/installer in your area. Any other questions, just ask!
ledglow 9 months ago
if the lights were left on would they drain the battery?
r335 9 months ago
@r335
Yes they could drain the battery, but since this is an LED kit it draws very little power and it would take some time to completely drain your battery.
ledglow 9 months ago
I've just bought the blue wireless led kit and wondered if i can, instead of making the red positive wire go to the horn can i just put it directly onto the positive terminal of the car battery instead?
atk1540 10 months ago
@atk1540
You can certainly do that. The red wire just needs to be connected to a 12v source.
ledglow 10 months ago
I can not closet fuse box with the add-a-circuit because the horn fuse is to close to the exterior of the fuse box. Is there a different fuse you recommend using?
ericimi 10 months ago
LEDGlow, I bought the 6pc Wireless Million Color LED Underbody Kit with the 4 underbody tubes along the the 2 interior tubes and i bought 2 more interior tubes. How do you install the interior tubes and the underbody together? Is the underbody the same as in this video and the interior just inside the car? Please get back to me! I'm very excited to get these lights. Thanks, Nate.
amznaznbmxr2 1 year ago
@amznaznbmxr2
There is a junction cable for the interior tubes that plugs directly into the underbody control box. You can add up to 6 interior tubes to your underbody kit.
ledglow 11 months ago
i dont want to do this installation and fuck up. can i take it somewhere and have it installed?
8gbiphone 1 year ago
@8gbiphone
if you are not comfortable with the installation we recommend having a professional install your kit. Damage as a result of improper installation will void our warranty.
ledglow 11 months ago
I got an add a circuit that says that it only goes up to 10 amps..ive tried using it with 10 amps fuses but when i do, the lights work, but eg the horn dosnt work..im trying to connect it to an empty fuse but im not sure if i can use it with an empty space the goes up to 20 amps...mien is like the one in the video where i can put two 10 amps..please advice
favio1415 1 year ago
@favio1415
We can absolutely fix this, but i would like to troubleshoot the issue a little more. Could you please contact our technical support department so we can find out what exactly the issue is and how to fix it.
ledglow 11 months ago
What if I already have something in my horn circuit? I have train horns.
ballazway502 1 year ago
@ballazway502 lmao
OutdoorsInTheMidwest 1 year ago
@JoshSetumTV... no it doesn't mean that. it basically just replaces the fuse so u can run the horn and lights
dearblackgoodby1 1 year ago
When you say 'Horn Circuit", does that mean the car horn wont work after taking out that fuse?
JoshSetumTV 2 years ago
@JoshSetumTV No. The horn will still work because the circuit that he took out is just a "connector". A "bridge". When he put another circuit in, the horn will still work because you just put in another "bridge". =) Do you know what I mean? If not, I will answer any more questions.
LoveGrowsByTalking 1 year ago
great tutorial, helped me alot
fifteendollarbill 2 years ago