How To: Fingerboard Tuning!

[TheGunnarSchmidt]

Remember when you could watch a video without having to sit through a commercial?

Remember when music videos were uploaded by users and not VEVO

Remember when all the info was to the right of the video?

Remember you could rate a video 1-5 stars?

Remember the famous yellow subscribe button?

Remember when the users controlled the site and now corporations?

Post this in every video and lets start a youtube revolution!

Thumbs up to keep at the top of the page!

[Koolkid736]

@TheGunnarSchmidt 1: you can download something to stop that.

2. why does that matter?

3. again, why does it matter?

4. stars were cool but its not a big deal

5. who cares what color the sub button is?

7. lolololol? users never controlled the site.

8. you didnt notice i skipped 6.

[kyle22521]

@Koolkid736 i noticed that you missed 6 XD some of us r smart u know

[notsoninja36]

can u make a vid on what happens if the axle doesnt come out all the way and gets stuk in the hangar?

[knottynerd32]

Why do u need the epoxy/jb weld?

[Famasking50003]

y do u use pliers u have hands

[0CRAL]

Cool vid mate, very informative.

[BbLlAaCcKkRrIiVvEeRr]

can u use superglue insted of jbweld or whatever it is?

[cowpiggy1]

1:14 slut

[easysteeze1]

@elementbambaby123 getting free stuff isnt why u shuld want to be sponsored, u shuld want to be sposored so you can represent their products and be apart of their family. also to help improve their products

[epicferret1]

you cant just screw bearing screws in?

[ElloSkateboards1]

ii hate when your following along and everything is taken apart then you need something you dont have and your screwed

[SuperSkateman13]

did you use tech deck trucks

[3xtracri5pyL33]

what if the baseplate hole doesn't have a thread? i tried installing kingpins but they fell out.

[leelou2010]

hey should i order o ringz and does anyone know of they will fit propoganda orion trucks?

[leelou2010]

top 2 fingerboard companies flatface aand berlinwood

[davidlok100]

Are these trucks wide?

!!!!!!!

[MrKvittot]

mike your so awesome

[FBwithBWonBRR]

do the fbs bearing screws still have to be glued in....like....have they improved them...so that you only have to tighten them....i think they now make them with a flat head screw tightening...thing

[sebastiancastelli1]

i tested the kingpin part out on some tech deck trucks before my truchs and when i stuck the kingpin in it slid all the way through

[Magicsidekid123]

mines made out of clay...

[Sk8terfoolsteam]

@OfficialLectric thanks

[SeaNStarZz]

You have very big fingers...

[zzz8890]

@killerjo.net

[Sk8terfoolsteam]

where can i get some reasonably priced bearing wheels?

[MakeFBsNotWar]

@Sk8terfoolsteam class a fingerboards

[Smilyspossom]

who has a vice?

[TheFBnick]

damn your freaking best fingerboarder out there and you se bollie trucks why not blackriver trucks mhhh ? thumbs up and mike remember reply

[Fingeriukas1]

@Foxtrotpapa15 you seriuosly gay nobody wanys to know that you gay

[foxtrotpapa15]

i m gay i have no life.........

[TheFBnick]

its more how to : destroy your trucks

[z182100z]

U ARE REALLY CRAZY MAN



[JavinDeNoyaSkates]

when your hammering out the kingpin just use a skateboard deck (the holes where you would put in the screws to attatch the trucks)

[drakeisaguy]

Should i get Bollie trucks or Fingerdecks trucks?Someone please help me!

[iEatFFFBS]

@drakeisaguy bollie im going to get bollie

[Fingerskatebergedorf]

@drakeisaguy bollie is nice and i dont know fingerdecks trucks :D

[fingerskate3]

@drakeisaguy you should get bollie cause they have new shaped trucks(i think) and their better than fd's.

[scuzznightrunner]

doesa anyone know if i can put ytruck kingpins on spinal wides??

[SKINeONEr]

what if you want to change ur bearing wheels after :S

[Strakallion]

@SKINeONEr you can just take out the hangar

[Bossness123]

@SKINeONEr Aslong as you don't put tonnes of glue on the nut, your good as gold, and can change them like you normmly would :)

[XXsk8r4christXX]

do u have to use jb weld or apoxy? can u use like super glue?

[SkatePride101]

@XXsk8r4christXX for the duel bearings, use super glue to hold it in place, careful you dont get get glue into the bearing. and if they are single bearing, no need of glue. also if you are a person who likes loose trucks, have it loose the way you like it and glue the nut to the kingpin

[247gothboy]

what deck is that and what kind of trucks and grip or rip or fbs extra smooth

[247gothboy]

what deck is that mike?

[elementbambaby123]

every 1 is lucky enough 2 have mums and dads that can get them fingerboardng stuff. u guys are all lucky. i cant get anything because we are allways low in money and it sucks. i see people with redemption flatface blackriver roswell stuff and think :( u guys are lucky. my deck hardley holds togeather :( .so i was wondering if any 1 could sponser me and look at my vids. please please sponser me please!

[whiz62]

where did you get the bushings i need some i am going to do this to my trucks

[Enjoi39jo]

@whiz62 Flatface.blackriver,creekwood,­prowood they should all sell bushings. flatface has the best bushing though

[skatesnow219]

poop?

[Fingurbord]

I'm almost the 123,456th viewer (123,556th)

[SkatePride101]

i try the hammer thing, and i forgot not to do it hard, i snapped 8 kingpins.. 8 bases of trucks down the drain.

[xBernestox]

My Creekwood kingpins were too big for the hole, when I tried putting them in, they wouldn't go in. Help?!

[AgeOfEmpiresLOL]

my trucks are really really loose and i try to tighte them up but they wont get tighter any tips ?

[unboxerman12]

how are these better than stock kingpins and axels

[ChillzFingerz]

@unboxerman12 u cant get loose trucks with stock with out the top skrew falling or the trucks being crazy loose

[whiz62]

@unboxerman12 they are better to me because you don't have to worry about loseing the dumb nut.

[Wastelander0525]

2:07 if u clam it as hard as you can you will fuck up the threads... moron

[yoyoboy7133]

@Wastelander0525 its mike schneider. he knows what hes talking about.

[Wastelander0525]

@yoyoboy7133 ok then get a clamp and clamp your axle as hard as you can =]

[MNdmt320]

i bought some kingpins from nocomply and i got the black wide trucks from there too but when i tryed to put the new kingpins it was to small they didnt screw in. i tryed them in other base plates and none worked is that cause there to small or something or cause that company sucks.

[skaterofalltypes]

@MNdmt320 no ur just bad at putting the kingpins in, u probably either stripped the threads or bent the truck its self

[MNdmt320]

@skaterofalltypes yeah dude your so fucking smart im glad you had the time to read my comment and get back to me you no so much. and no i tryed to put the kingpins in and the were to f u c k ing small so suck on that faget.

[blindsk8erboi]

haha shoot... i think i put my top washer the wrong way.... i put the top washer on the bottom of the top bushing

[YAYMAN96]

spinal wide trucks hangers will break if you do that

[YAYMAN96]

thnx mike

[warwolf141]

i have tech deck :D

[joachimpie]

"if you hit it too hard you might break it" SLAM!

[Wastelander0525]

close up trucks blow =[

[MNdmt320]

@Wastelander0525 hahaha yeah they do

[Wastelander0525]

@MNdmt320 i bought some redawns off aphlikshun, alot nicer and wider lol

[heyY3ah]

can you use the same method to remove blackriver trucks kingpins?

[Greger2k8]

I try to loosen my trucks kinda loose, but after 5 minutes of seshing, the nut flies off.

I want loose trucks, but I can't have them. Any advice, anyone? Thanks.

[jato18tz]

@Greger2k8 adjust them to where you want then take a tiny drop of super glue and dab it on the bolt wont come off until you unscrew it but remember only use a tiny bit of glue

[hotrodsk8er]

@Greger2k8 glue them on or get kingpins

[legowars3000]

at 2:29 i was like oh shit!! it broke!! lol!!

[thefingerboarder19]

hes really young here.

[BAKERBOY100TK]

can you make berrings for fingerboard wheels? let me know

[darkerik411]

better results for mixing jb weld is 3 minutes

[skateingMetalHead25]

why cant you just use non bearing screws on bearing wheels? that way you dont have to glue, you can just screw it in

[king16919]

@skateingMetalHead25 yeah i also thought like you

[bambam4526]

@skateingMetalHead25 im guessing the hole in the bearings is smaller than the holie in nollie and tech etc wheels so the threads prolly mess it up while its rolling

[dudesaba]

controlfingerboard.webs.com

High quality fingerboards for reasonable price!

[skatergod32]

Mike is just so patient.

[blissticfbs]

can someone please tell me what bearing screws are for and would i need them if im gnna buy dual bearing wheels???

[MrSimon98]

@irishskater10140 we fingerboard where all gay

[crazysoloreversevids]

@irishskater10140 :)

[WideLegoWorld]

@irishskater10140 when i read this i was liek wtf lolololololllmaorofloloroflrof­lmaorofllmaolmaolmaaaaoooolmao­fmforofl LOL

[superphil92]

@irishskater10140 mm horney

[marc12201]

@irishskater10140 No shit lol

[houstonskaters]

@irishskater10140  dude your fucking nasty

[irishskater10140]

@houstonskaters my brothers pranking me haha im not gay man my bros always do this to me

[houstonskaters]

@irishskater10140 haha ok

[DjFunky1000]

0.08 i thought it was a real skateboard at first =)

[flipcrazed09]

Is This for flatface trucks



[J1r436]

Thats what she said at 5:50, 5:30, 7:28, and 7:31 :P

[mittdeckfingerboards]

can you do this tuning for black river ramp's trucks?

[KNbmxer51]

i like the screwdriver

[brightboardsfb]

You dont have to glue the axle in you can put a pivot cup in the truck instead. Then you have no change ruining your wheel.

[FingerSk8er100]

@brightboardsfb yes but it will effect the wheels spinning. and you can never take the pivot cup out

[basketballreflexes]

cant you just screw in the screw with the bearing wheels? whats the difference?

[ment2bzer0]

do you still need bearing tuning screw with the single bearings???????

[GcMaRtinii]

when you glue the axel in (bearing screw) , is there anyway you can get the wheel off it? like can you take the axel out when you glued it in? please reply!

[goalscorer1212]

@GcMaRtinii order new trucks for $5 from flatface. spinal wide are good

[shadowfingerboard21]

Hey Mike when you put in the kingpins does it work with any type of kingpin?

[shanebeadall]

whenever i try to take the axles out even if im careful they snap off

[PedroSoaresFB]

100000 views!!!

[lucasmychan]

does the king pin works in the close up trucks

[hockeysoccerman11]

@lucasmychan no it doesn't

[zanepx90]

on techdeck trucks do u need dif axels for baring wheels

[dermieper]

No.

[Hilo95]

no you dont. just it helps somtimes. but bearing screws dont fit in any of my flatface or winkler wheels.

[LilWayneFable]

i did taht just with my hands and a knife XD

[SGKproductions09]

okay so i ordered some kingpins from no comply and i tried to screw them in but they were to loose. any help?

[fereverFB]

@SGKproductions09 take some pivot cups material and cut it in half so its not a tube any more and stick it in where you put your king pins

[mdlhoward]

i broke my teck deck cos the wheels fell off!

now i use it as a snow board

[Sbfingerboarder]

thx

[TheJalex350z]

ok i have flatface g7d's and tech deck wide wheels would they break if i dont tune them?

[Richardiscool1997]

yes

[StupidityFederation]

Damn nice camera. what kind is it?

[hondaxr701]

do u use a washer for bearing wheels screws?

[sunayosmani]

do you need to do any tuning to the br trucks

[MrLookitsDylan]

noo there like perfect the way they come

[sunayosmani]

thanks

[sunayosmani]

thanks cause i have a berlinwood complete with br trucks

[MrLookitsDylan]

thats an amazing set up lmao

[sheardown123]

for flatface bearing screws do u use a allen key??

[jab7805]

no you use a flathead screwdriver but a really small one

[TranSOMfilms]

i have a fingerboard,the screws fit in the holes and all,but when i try to tighten them,they dont tighten,the trucks just keep falling off.Any tips??

[DesuConcrete]

if you mean the fbs/flatface kingpins, then that means that you hit the kingpin on the baseplate to hard, and you broke the threads.

[DjFunky1000]

@TranSOMfilms its because your truck "holes" u no the one u put the screws in, is bigger than the screws ,and there is no way to fix it =P

[nolli159]

kingpins are awsome!!!!

[wisconsinskater09]

aha i ordered SUMMIT KINGPINS like x3 of em and they are so strong tht i stripped like 20 pairs of baseplates till it finally worked :D

[TheColdFingers]

lol., Mike you said:

"This is a Fingerboard store.., Uhhmm, Kingpin." xD

[jaytjuh575]

mewhahaa

[birdhouzze69]

is that a tech deck truck?

[BerlinerBretchenBude]

@birdhouzze69 YES!

[fingershredify]

if you use shorties kingpins from no comly, do you have to have kingpin holes on your deck?

[PlanBwoods]

hay iDipiAndSkate he does skate jackass

[fingershredify]

fifth...FUCK YOU.

[An0nym0usx13]

Could you talk louder please...Thanks :D

[MrHandyman121]

y do u need the jb weld stuff

[wtfareyousmoking]

its a lot harder taking out the axles without a vice

[JNewlly]

can you use the fbs kingpins as axles aswell?

[NestorManeraa]

No wtf

[JNewlly]

haha well u can because my friend gave me some kingpins and i used some for kingpins and some for axles. They are the same thing, so fuck off.

[NestorManeraa]

Whoah ok dont trip fucker ; My bad .

[JNewlly]

can you ue the fbs kingpins as axles aswell?

[chargersboy22]

im pretty sure u can but i wouldnt recommend it

[collaborationskater]

do you have to use bearing screws? can you have a techdeck axel in the truck,put the wheel WITH a bearing in then use a regular techdeck bolt to keep it on?

[scrapyardroks]

most of the time yes

[SteezySpencer]

Can you use superglue?

[MRfingerboarder911]

yeah

[bubbalfb]

when u glue ur bearing screws in, the epoxy conforms around the screw and makes threads, so u can screw it in and out right?

[SGKproductions09]

can you use super glue to glue the bearing screw in the hanger?

[jmteixeira1]

why superglue in bearing screws?

[bwholzschuh]

5:50 that sounds bad :-(

[mrSugarglider]

um what finger board is dat i have a crappy tech deck kind?

[BuiltRetarded]

sometimes when i try to tighten my kingpins it wont tighten cause theres no threading or something. wuts wrong?

[sheckler244]

use a dap of gorilla glue or use a old tech deck base plate.

[Jonikz1234]

of course you can, I guess. :D

[slapbeef]

what dos this prove nothing

[BerlinWooder2000]

FAIL, this shows you how you should tun it the right way :)

[wcrxmx]

its easier to remove the king pin by pushing the pin against the table and it comes out the top

[MEaboveCOOLIO]

i take out the kingpin by holding the little base with plyers and squeeze it rly hard and take a hammer and tap out the top and it will come out.

[blackskulldecks12]

that mans i am never able to remove the wheel?

[skateboard221]

could i use regular tuning for close up wheels

[CooperScoots]

what trucks are they are they teck deck trucks?

[faisel2]

i have fbs kingpinz but the fall out