Drag Mower Project

[MOTERMANIA]

to bad it dosent do wheelies

[legomanre]

what tool were u using in the start

[rbrats1344]

@legomanre That is called a track torch, it has wheels on it, and adjustable settings, so it can cut at a desired angle and speed, depending on the metal you are cutting. However a steady hand will also do the job just fine.

[TnT4288]

how do i make realy cheap wheelie bars for my mower? and sick video well set up!

[rbrats1344]

@TnT4288 Do you really want CHEAP wheelie bars ? I didn't, so I made mine out of uni-strut, welded all of the connections, used a piece of 3/8" all thread rod for the axle, two wheels off of an old jobsite tool box, 1/2" conduit for spacing between the wheels, 3/8" washers, 3/8" nuts (doubled at the ends, then killed the threads), Welded two 45, and two 90 degree brackets to the assembly for mounting it to the mower, Welded on a battery tray, painted it, then mounted it. That's the basics,

[rbrats1344]

@TnT4288 And don't forget to subscribe to my channel, some other mower vids there.

[idk1234idk88]

@rbrats1344 never said it was bad. just slow

[NJSPredneck]

how did u lower the front end

[rbrats1344]

@NJSPredneck------ It was as simple as replacing the old stock front wheels with two new smaller inflatable hand truck rims and tires at a cost of about 10.00. Purchased at harbor frieght, added some washers to the axles, and done.

[skatabeast13]

wats the name of the song i love it!

[13stipan]

I understand that pulleys give you speed, but how dose it do this and how do you place them.

[jacobgnarlif]

it is like on a bycle when you change the gears larger in the back means slower but more torque a smaller pully in the back will increace your top speed but lower the torque so the Idea it to find the perfect gear ratio so you can reach maximum speed in a reasonable amout of time the easest way to do this is just put a smaller pully on the back (about half the diamiter of the original works good) also you will need to change the belt (smaller) first install the pully then measre fro the belt

[matthewmarrs123]

ok the music scares me badly.

[elloimastud1]

how to find the governor on a lawn mower wats it look like an where is it more likely located and how do i adjust my mower to make it go faster

[whitetailbasslayer]

i dont know if i would disable the govenor completely from experiance but u could make it tighter.....looks like a nice mower tho

[roboman79]

What size pulleys?

How fast ya think it goes?

[corvettkiller666]

will it wheelie ??

[rbrats1344]

In the process of making the new video, we discovered that it will if we replace the old secondary drive belt. It burned up and jumped off while at the same time knocking off the tension spring. Point is belt was old, and should have been replaced from the start. But mower has a new fresh look, with a few automotive upgrades. Update video is being constructed now, and will be uploaded this week. Wheelie video to follow shortly thereafter.