@elyab of Course it didnt flare, as it was a CAT II landing, it will only flare if you perform a CAT III autoland, when tuned into the ILS frequency, and the CRS set for autoland, with an approach vref selected on FMC too btw.
what program do you use for this playback where the yoke and the control surfaces are moving? If it is the walk&follow please explain me how to get this mode! Thanks!
are you kidding? My auto-landings are absolutely FANTASTIC!!! I landed on the center line and everything went well when I touched down into LAX. It was so breathtaking.
By the way...for an ILS Approach you need to program the Frequencies as stated before...but you need t click the LOC (Localizer) Button firs then after it intercepts and turns you click APP
It was a hard land because you did trust on the altitude glideslope. :) The smoothng and flare is task of the pilot. Hint: set -999 on your altitude and control the descent with VS values.
if u tune the ILS freq into the nav 1 Radio when u are close to the airport and click the APP tab on th autopilot u should be brought right in and the altitude Tab will disconect its self once u are established on the locoliser
hard landing
aaronrodgers77 8 months ago
hi,i am a pilot of a boeing 757-300,good job but never land with autoland,auto land its only when u landed with hig wind ,good job.
pilot757ify 2 years ago
@pilot757ify nice landing
pilot757ify 2 years ago
Good Video 5* but buy the 757 Captain!!! It's much better!!!
leChecker757 2 years ago
@leChecker757 naaaah the model of project opensky is much better of the captainsim its cool
pilot757ify 2 years ago
how it is aoto if u r controling and moving the controls?
idantraub14 3 years ago
I didn't control the aircraft except disactivating autothrottle at minimums.
It was ILS approach & CATII landing although NO flare performed by autopilot before touchdown.
By the way, this AP issue wasn't fixed by PSS.
elyab 3 years ago
@elyab of Course it didnt flare, as it was a CAT II landing, it will only flare if you perform a CAT III autoland, when tuned into the ILS frequency, and the CRS set for autoland, with an approach vref selected on FMC too btw.
Still, nice work ;)
SuperPatchman 1 year ago
haloo0o0o0o0oo0 how did you think about 757 from ben gurion airport to bangocok
nsimsa 3 years ago
what program do you use for this playback where the yoke and the control surfaces are moving? If it is the walk&follow please explain me how to get this mode! Thanks!
vadani93 3 years ago
are you kidding? My auto-landings are absolutely FANTASTIC!!! I landed on the center line and everything went well when I touched down into LAX. It was so breathtaking.
readparse 3 years ago
what year is thisa
paintball66n9 4 years ago
I've never been impressed with the PSS autoland, it just dosn't flare at all. PMDG are good :) and even the new Feelthere A320 is alright
Christopherwoo 4 years ago
nice vid, but how do you set the FMC?, because it allways comes not in datetabase when i try to set the airport code into the fmc ? can you help me?
ajs91 4 years ago
Hey mail me and i can tell you how to set up the FMC if you like. im a veteren on the PSS 757 lol
Boeing757basher07 4 years ago
By the way...for an ILS Approach you need to program the Frequencies as stated before...but you need t click the LOC (Localizer) Button firs then after it intercepts and turns you click APP
AC777FAN 4 years ago
can you tell me your specs and what you have you flight simulator settings set to
shep2k7 4 years ago
Extremely modest specs...
P4 3Ghz, 2GB RAM HT, Radeon X850 512MB, SATA 160GB HDD.
Flight Simulator settings are:
FS9.cfg :
[TERRAIN]
...
TERRAIN_EXTENDED_TEXTURES=1
TERRAIN_DEFAULT_RADIUS=9.9
TERRAIN_EXTENDED_RADIUS=8
TERRAIN_EXTENDED_LEVELS=4
elyab 4 years ago
It was a hard land because you did trust on the altitude glideslope. :) The smoothng and flare is task of the pilot. Hint: set -999 on your altitude and control the descent with VS values.
smartalpha 4 years ago
How do you autoland?
772pilot 5 years ago
if u tune the ILS freq into the nav 1 Radio when u are close to the airport and click the APP tab on th autopilot u should be brought right in and the altitude Tab will disconect its self once u are established on the locoliser
shep2k7 4 years ago
thanks!
772pilot 4 years ago
have u tryed it yet then , lol
shep2k7 4 years ago
have you autolanded yet then
shep2k7 4 years ago