Dye / Proto Matrix Maintenance- Fuse Bolt

[freakoutairsoft]

69% of people on youtube find somethin dirty in a sentence

like if you find this true

[djmarkian]

You can just squeeze that O-ring to take it off. Using a pick can damage a good O-ring. Just my thought. I just cleaned and lubed my fuse bolt tonite and did thought about using a pick but instead I just squeezed it from one side and the other side will lift up and from there you can remove it....

[pvmpaintball]

thanks, ive been wondering how to get that last 'beer top" off

[anarchy22x]

What are your settings on the gun?

[RacerXA7X]

need some info. i just cleaned and replaced every o-ring in my dm6 bolt but it still is leaking air from the back of the bolt? any ideas of what the problem could be?

[riderthewake02]

dont lube the front oring

[iball4eclipse]

at 3:24 he sed lubering

[tornow94]

Wonderful videos, keep up the good work. These help a lot on my decision on getting a matrix. Subscribing. :)

[HotChowder123]

excellent.......5 stars

[EgoManiac246]

hey man is that v2 hatersauce

[foxhenry11]

i have a pm6 an i used it on Monday was leaking guy their fixed it and played Friday and had the same leaking problem coming out of the end of the bolt i lubed it and changed all o rings any other suggestions?

[broboter56]

dont use hatersauce

[foxhenry11]

alright thanks man

[EgoManiac246]

why not its better than dow33,or he couldve got marlade that wouldve been betterbut wat ever hatersauce is a kick ass lube

[riderthewake02]

@foxhenry11 bolt sail???

[g4lover2]

yah this vid helped me alot

thnx man

[EACORE]

this helped me a lot to find and fix a leak on my dm5 THANKS

[PhantomP63]

Why grease, instead of an oil like Hoppes 9 or Gold Cup?

[nopopallowed]

The design of a spool valve gun requires a grease. Specifically it requires a grease that does not swell the orings. I presume the main reason is that the oil wont stay in place the way grease can.

[barredoa]

good vid very helpful!

thanks bro!

[stevenruless]

cheers mate this video really helped me

[syderpaintballer]

do you have to put a new oring on everytime you clean the bolt?

[SuuperSteve]

negative, unless your getting a leak.

[SteveLaLa17]

should i clean my bolt if i chopped on paintball yesterday?

all i did was clean my eyes, barrel, and marker body.

should i dissasemble my bolt and clean it?

[maer9]

Yes

[SteveLaLa17]

thanks, i cleaned it today :]

i used the greeen dye lube on the bolt.

[M40kc]

Very heplful.

But how many times do you lube the bolt?

every case, 2 cases etc..

Thanks man

Favorited

[ProtoPaintBallz]

every 1400 rounds about

[CLoLopez1]

thtas a whole lot of lubing.. lol... good vid

[nono638]

very helpful video. thank you nopopallowed

[paintballer7449]

has anyone used the orange S.a.m. bolt for the dm4... i am thinking of getting it but idk.

[cj397]

No need for an aftermarket bolt, dye knows what theyre doing.

[oggy1233]

Hey i have done all this in the video but the gun is leaking air frm the bolt frm the back and cant understand why! i wud like if sum1 cud let me no common problems with the gun like this or how to fix it

thanks dave

[nopopallowed]

Try resetting your regs to stock.

[oggy1233]

i am new to this game haha and only had the gun a couple ov weeks! i got it of a mate second hand and not to sure wot the regs was set at.

[nopopallowed]

Screw the set screws for both of your regs all of the way in. Then screw out your high pressure reg 3 turns. Then screw out your low pressure reg either 3 turns or 5 turns. (it depends on which matrix you have)

[pm7king123]

ok that could be either the two o-rings on ur bolt sail or ur not using enough lube

[pbpat23]

very helpful, great vid

[KYkMan]

You have way to much lube on your gun.

You don't need that much on the outside static o-rings. You could just use the residue lube that was on your finger to use on the static orings.

Also, you don't want little to no lube on the front oring.

[NBPaintballer]

good vid

[MadPaintBalla]

Great Video!

[pbgangsta17]

first comment cool vid