3min how to install xbox360 rapid fire mod from mykwilwin.com MW3-mw2-gta4-halo-nazi zombiescod5-

[907Customz]

no offense but your mods suck. my modes arent that good but there better check out my youtube channel i dont have that many videos up yet but i will have some more up soon.

[coolgadgetproduction]

why not just use a fully electrical mod instead of a physical one. It works just as well but you dont have to have stuff on the outside and you dont need to have vibrate on.

[EvilCOOPER19]

Does it matter wait type of a controller?can it work on the new black one ?

[EvilCOOPER19]

Can it work on the new controller to ? . I like to get the kits and do it my life buy them off you to .

[EvilCOOPER19]

Can you seed me the like in a messages man .

[EvilCOOPER19]

How do you get that mod kit ? And how much

[mykwilwin]

@EvilCOOPER19 from my website mykwilwin i have them for 7.99 with free shipping also ebay and etsy

[allen15099]

This is a great modd easy installing i got mine today freeshipping and costed 8.49

[infamous1399]

do u need that machine for the wires

[logo417]

not hating it aTorx t8 security

[TheDrizzyModz]

Nice trigger finger :troll:

[poopshoes09]

Haha mykilwin.com is where u get the kit from for those of u who keep asking.

[mykwilwin]

@poopshoes09 you mean mykwilwin and i know.. i say in the video were to get them some people dont know anyways you earned a free mod if you want let me know

[rockstar41203]

Your Xbox is jacked up

[iiThePro]

where did you qet the kit? and what was that biq thinqy you used on the wire? please messaqe back (:

[mykwilwin]

@iiThePro i make and sell this mod kit from my website and ebay also on the end is the sensor to make rapid fire

[paperplan3man21]

does this work with a black controller?

[ThaCookayMonstah]

@paperplan3man21 why wouldnt it??

[iloveanicecookie]

But will it blend?

[cloverking1717]

where did you buy the rapid fire button kit at??

[eXempTNATiiON]

my trigger finger is faster

[ALEX9O9]

Nice

[Howlingvicer1]

Ill mod if i want cause i get money selling custom ones hand made, by me, with pride! STFD haters!

[BarakAshit]

So what your saying is that you suck and have no skill at gaming that you need to use Mods, hacks, Jtags etc? Get some skills noob and quit using mods....

[xXGABBAGANGXx]

Don't buy it!!! I ruined 3 controllers trying to do it! Don't waste your money!!!!

[LockedXVII]

@xXGABBAGANGXx. this worked fine for me. Learn to solder before you go breaking your controllers.

[Elderspatan]

We're do you buy this kit

[MrWildGamer69]

mine only does single???? i soldered were u told me 2 and it no work but i didnt it one time but than it stoped working so idk did i get mod locked plz respond

[mykwilwin]

@MrWildGamer69 hmm, just make sure you have the white mod sensor in a good spot on the left just above the magnet that is inside on the motor spinner also have your vibrate on.. if that does not help maybe a wire poped off the post let me know, mike

[MrWildGamer69]

@mykwilwin

well i used a momentary push button?

[mykwilwin]

@MrWildGamer69 oh, i thought you were installing my mod and having trouble.. a momentary switch wont make rapid fire alone you need a pulsating power source like a timer chip or led type mod or magnectic pulse like mine

[MrWildGamer69]

@mykwilwin

o and the sensor will work and the momentary wont? were do u get the montion sensor thingy u have?

[DarkDragon7842]

I got an idea just use your trigger finger like the rest of us :D

[forza3skillgod]

hey does really thin cable work? its single core and it used to be used for jumper wire, who ever tells me ill message them a 2100 msp card code.

[niterider1251]

@forza3skillgod yes it will work as long as ufollow his instructions with that thin cable wire

[TheAronBampton]

its 5 mins?????????? u lied!!!!!!!

[shadow2468564]

dose it work with reach and black ops?

[mykwilwin]

@shadow2468564 yes for reach and only the zombie's part in black ops it works

[miloholbrook]

The word is solder say it with me....SOLDER not SODDER!!

[Pandagummybear]

Cool mod I guess did you buy the mod kit in ebay

[ilovekh13]

They sell moded controllers at gamestop

[sabarwolf39]

8.99? wtf? i can make one and sell for 65 bucks thats five fucking dollers more than normal controller a fucking wire and switch? dude i got to tell you you suck penis (like)

[BounceY2j]

@mykwilwin Plz Comment

[BounceY2j]

U Said 4-5 Days This Is The 5th Day And My Mail Has Already Ran Ill Wait 2 More Days Then im Gonna Hav 2 Report This

[totallydude2597]

isnt harbour frieght in ogden utah????

[travicarter]

I have several of your mods but for some reason they don't work on black ops. Any idea as to why or how to make it work?

[BounceY2j]

Oright i just ordered mine i so hope it works ! If it does im refering you to all my friends ;)

[BounceY2j]

Does this work 4 new remotes ? Because mines dont have a resistor in the middle

[mykwilwin]

@BounceY2j works on all... new an old

[anthonyra2010]

can i get bannd if i play offline but have goldmembership????????????????­????

[mykwilwin]

@anthonyra2010 no its un detectable and its hard to detect in kill cam play back reports because of the un-even speractic rapid fire..

[anthonyra2010]

@mykwilwin thank you so much

[martynmc09]

@anthonyra2010 modded controllers aren't illegal when the actual controllers aren't property of microsoft, and they cant tell if its one of their controllers or not, might not make sense but it does to me :)

[MrAzrealasitgets]

dose work well but not for blk ops,,

[raymondyemm]

no offence i think it looks stupid were the switch sensor looks a bit stupid hanging out on the controller im afraid

[j35cincy]

Where do you buy the mod kit???!!!

[WehrmachtGeist]

Could I order a modded controller from you for $30? This is something I'd screw up in. Reply back, thanks!

[Hockeykid453]

Does this work on wired controllers

[mykwilwin]

@Hockeykid453 yes...

[icheyeanne108]

its t8

[badderthanyou]

This is for the old matrix controllers, do you have a video for the newer controllers?

[MADMAN123412341234]

Hey, I have a new question do you have any philips screw drivers to take out and customize the d-pad. I need one to mod my friends. Thanks please help

[MADMAN123412341234]

Do you solder to the top of the points or in beteween or what can you make a better quiality video or something please help! thank you

[mykwilwin]

@MADMAN123412341234 solder right on the tip of the posts... middle and top get the mod wires soldered to the post tips

[MADMAN123412341234]

@mykwilwin So you solder the tips> the three spikes just to the south east of the A button correct?

[52Biggmoney]

So i made my modded controller and it worked then i went to a friends house across the street and synced my controller to his xbox and it did not work anymore is it because of the sync what should i do?

[sam43troypolomalu]

did u say Quoza?

[IMGODLYxX]

where do u get the wire from

[mykwilwin]

@IMGODLYxX i have them on my website, look in my bio here i have a link, thanks...

[ItCouldBeTheELDO]

it takes torx 8 not 9

[mykwilwin]

@ItCouldBeTheELDO they both fit and 8 is loose and 9 is snug

[SirDylanator]

@zZzadaytorememberzZz alot do so yea

[Motokid98]

can you turn off the rapid fire

[mykwilwin]

@Motokid98 its only on when you press the mod button otherwise your controllers remains as it was before

[Motokid98]

does it work on a madcatz controller

[MrCrazyhack3r]

can u make one vid for ps3 controller

[mykwilwin]

@MrCrazyhack3r sorry, this mod wont work for ps3

[ThiiSNiiGGa]

will this work for mw2.. .. .. ..and where di get this chip at.....

[ThiiSNiiGGa]

will this work for mw2.. .. .. ..

[mykwilwin]

@ThiiSNiiGGa i have videos here showing it in mw2 and it helps with many weapons

[1kivadvm]

Does it matter if you use a white controller or not?

[1kivadvm]

Where can you buy the switch?

[thegab30]

How so it doesn't work if ur playing online like on groundwar and stuff?

[thegab30]

Also is it legit and does it work for black ops

[mykwilwin]

@thegab30 in that just the zombie part..

[thegab30]

Alright I'm good at soldering. I will be buying this but it better be legit.

[1kivadvm]

What are all the supplies needed?

[mykwilwin]

@1kivadvm you'll need a torx security #8 or #9 to open the controller and a soldering iron to solder the two mod wires to the middle and top posts...

[KLUTCH951]

mykwilwin nice instalation tatorial:)thumbs up

[HerrNiclas]

Crossweld three, there U have it. I won´t tell you which three. ´Cause we don´t like cheats do we?!!!

[mykwilwin]

@geonabro2 yes i ship there and have,, just $8.99 usd still with free shipping to you

[KIRI3IW]

y dont you put the motherboard on the button side. 10x easier

[TheClayboy123]

these work but prepare do do repair....

it comes un-soldered a lot but thats not his fault

[kamorter]

Where can I buy one of the mod kits?

[mykwilwin]

@kamorter from my website, look in my bio here there's a link ... thanks

[AL7REF502]

nop

[oliver1996ish]

were do you get the rapid fire mod?

[cody0018]

to do u live in courpus or any were in south texas cause i get my tools reply asap

[TheInsainepops]

hey i got the new cg2 board for the slim. Will this mod work. plzz respond.

[mykwilwin]

@TheInsainepops idk, i have not seen the newest controller yet..

[Lillocox4]

Send me a email to get a kit from you.. Chavezjimmy53@yahoo.com

[mykwilwin]

@Lillocox4 i sell them from my website

[gillysooses]

Rapid fire mod? You need to try the REAL LIFE GIRLFRIEND mod. You sound like a fat hick

[MrBillOverbeck]

@gillysooses

what's wrong with a hick? hm? Nothing, so shut the fuck up you gay northerner.

[jmoney9720]

i got one off ebay and it only came with one wire

[BasketballBeasts101]

You can also unscrew the screws with a 2mm flathead.

[thehoboguy117]

can it be any kind of little magnet?

[mykwilwin]

@thehoboguy117 needs to be the strong chrome neo type not the black ones

[thehoboguy117]

ok i have those but in a sphere form

[jmoney9720]

what is the tool called i dont have one to open my controller

[mykwilwin]

@jmoney9720 torx #8 or #9 security, needs to be the "security"

[fred87022]

were do u buy it

[shadowtrm]

where do you get the kit???

[mykwilwin]

@shadowtrm i have them at my website only, check my bio

[lolgansta344]

Is it possible to install even without the magnet controller rapid fire

[mykwilwin]

@lolgansta344 the magnet is needed for my type of mod to work..

[lolgansta344]

Is it possible to install even without the magnet controller rapid fire

[lolgansta344]

you have to have the little magnet that it then goes

[lolgansta344]

you have to have the little magnet that it then goes

[zViiNcEx]

not a 9 a t8!

[mykwilwin]

@zViiNcEx an 8 works but it is a 9... try it

[TheN1cK5t3r]

Wait wtf where you get the kit?

[ustupid360]

Whats that green chip called cauz im trying to get a new chip so my friend can remod it?

[gojunkfood]

its not called a hand gun

its called a pistol

[batesmiddle30]

@gojunkfood a hand gun is a pistol dumbass just like a fire arm is a weapon

[bdawg328]

I have a really good trigger finger so I don't need that

[Mushysparkk]

@bdawg328 then why r u watching modded controler vids??!!

[rayman1995]

i dont need that, i can just do it with my fingers xD

[OblivionxTutorials]

does it work on halo 3?

who do i buy a rapid fire mod kit?

and does that person take credit cards

[megafunnyvid]

i am sending this message all over youtube to ask anybody who has a halo reach faming helmet code or generator. p.s i u want to send me a code or reply calling me a faggout don't be replying to the comment send me a message. p.p.s if you send me a working flaming helmet code i will subscribe 2 u and will my friends to do the same.

[celtik916]

@megafunnyvid i know how to mod

[ITeMpErHq]

Were do I get the mod n iron from xx lol at avero

[Arevo]

@Xruncloud I'm redesign my controller lookin at the LED styles this was a link intrigued i clicked... a video is a video Where is it wrong to watch something even if its something you wouldn't do..? get out ur feelins foo lls.

[curtissparker]

@Arevo don't do it i did it to mine an my battery now dies in 1 hour

[Redsox9724]

Number one: Black Ops? Number Two: Which one is this is this the one on ebay with the picture of fire for $8.99?



[thehaloman1990]

does it work for MW2?

[mykwilwin]

@thehaloman1990 yes 

[Arevo]

what happened to skill.. no one plays with skill anymore they just mod... Ur not a true gamer if you mod ur controllers.

[XruncloudX]

@Arevo Why the fuck are you watching this if you dont like modders? dumbass

[mykwilwin]

@cmaylone3 i meant zombies part

[tiffanyduhlynn]

oh my goooosh i need help soldering mine lmao.

[LozUre1998]

solder

 not sodder

[fallenangelsSB]

uhhm why the magnet?

[GreatFinisher]

does it also works on black ops??

[mykwilwin]

@GreatFinisher just the nazi part without getting blocked

[TheWilliepeterson]

Where can u buy these cable switch things

[mykwilwin]

@TheWilliepeterson i have them on my website only

[tisim3]

how do u get this cable ??

[I2ockstarModz]

@tisim3 I sell it cool-mod(.)webs(.)com

[TheAkm74u]

Real cool man im gonna order one. how often do you get kicked from games for having the mod

[mykwilwin]

@TheAkm74u never... its hard to detect because of its fast speractic human like rapid fire rate...

[INDEPENDENTPRODUCTS]

Dude. It doesn't matter about the color of the controller its the board inside that matters! Duh!!!

[CATACLYSMWOW2011]

did you record this with a fucking phone?

[mykwilwin]

@EpiicCow takes about 3-5 days... and you should have received a message for your purchase... anyway's its en route

[TheKingdomheartsfan2]

@mykwilwin same here bro.

[mykwilwin]

@EpiicCow have someone help you..a clean iron tip and flux will help get the wires on safely and secured

[xXaNAnGrRyArAbXx]

hey i would like to buy acouple of these so msg me back plz

[istandalone594]

when will it come in cause i got one and its been a week

[mykwilwin]

@istandalone594 should have by now.. are you within usa or out of country

[istandalone594]

@mykwilwin yes im within of the usa

[istandalone594]

@mykwilwin this works i just got it today and its awesome i think every one should get one it is really fast to i like it. thanks mike.

[mykwilwin]

@istandalone594 thanks.. your welcome

[MajorXMcmuffinX]

how do i get the stuff for it not the soder gun the wire

[mykwilwin]

@MajorXMcmuffinX i have them at my website, look in my bio..

[Thepeeps4life]

All you need is a soldering gun, some solder, spare wires and a push button switch, if you have all of the things except the push button, goto radioshack, $4.50

[the8rain]

radioshack, its actually under 3 dollars.

[WoWGuides33]

Just letting you all know before you buy this, all the materials are about 3 dollars i looked it up

[mykwilwin]

@WoWGuides33 really....please make a video showing you gathering these items and postage for under $3

[WoWGuides33]

@mykwilwin Im sorry i commented that i felt really sick and my pet died yesterday when i commented so im sorry

[iancrawford8]

thanks man works great we had troubles but it works

whats your GT?

[venomDgamer]

Do i take off the sticky tape on the magnets

[mykwilwin]

@venomDgamer yes take the tape off and place the magnet on the rumbler

[eatingrasberries]

Does this work for call of duty black ops and halo reach online

[FLIPproductions1]

does this work on black ops?

[314isabeast]

this is like the hardest possible way you can do this.....you can install a plate for $5 that is completely internal and it changes your LED too.........

[sammyslyguy]

do you have to sauder the wires or can you tape em

[jesus321321321]

i just bought one yesterday and um what time do you think its going to get here

[Hockeykid453]

Mykwilwin, thank when I open it up I found out that the magnet had fallen off. Thanks so much