I cant wait for mine to get in, but can some one give me some advice on removing my front sight? I looked around and from what I've read, there is a tool specifically for removing it. Is this the right way to go or is there a way to do it with a tool I probably already have?
@toasty4000000 To remove the entire front sight/bayonet lug assembly on anything other than a yugo- you simply need a punch and a hammer. tap out the 2 pins...one on top and one in the rear of the sight "slide" and a little heat and a few whacks and voila...she will come right off. if you have a yugo and want to remove the grenade launcher..you need a tool...best way to do that one.
I just finished watching both parts of the assembly, has any one purchased and used this kit in the field at all? Any reviews yet? Is this as dependable as it is made out to be? It looks great and all but... ?
I bought mine a few days ago. Don't care if it takes a few months. I bought a Hammer/Sear/Trigger kit from Murray's Guns to be compliant. I tried to find an American made fixed 10 round mag but I couldn't find one made of metal. The kit from Murrays was $85. Counts as three pieces. Removing the handguard and FSB took me under compliance. I live in CA so its rough, but removable mags for the SKS are a crapshoot anyway.
Anyone from California have one of these, I was thinking about buying one but with all the commi regulations I dont know if that will be possible.....
@w3bj3d12 first off the underage comment what does that mean, shes putting a gun together not sipping some of grandpas cough medicine, next i know as you do also, that the worlds not perfect but really should her father have had to worry about a vulgar comment, or should there not be immature people in the first place to leave them, ur comment sounded to me like you are less against vulgar comments, and more for people changing their videos to some overly modest universally friendly trash heap
how do you remove the front sights, and the bayonet mount? because i think this would look ridiculous with those, and when will you have these in mass production so you can send them as soon as you get them?
@Dmajorproductions You can remove the FSB by tapping out the 2 pins holding it in place on the barrel. Then, you heat the front sight area, then the bayonet lug. You tap the bayonet lug toward the end of the muzzle, removing it. Usually, this is hard as hell because the FSB is happy where it is and doesn't want to come off. You can angle the rifle muzzle down, buttstock up, then place a block of wood on top of the BL, then hit with mallet, taking care not to strike the barrel. Good luck.
Still waiting on mine :( Hopefully only a couple more months, can't wait. Already have a foregrip and red dot sight picked out :) Just wondering......Anyone put one of these on a paratrooper sks yet???
@chezypuuf The origin of the gun has nothing to do with it. I don't like the former USSR (Or present Russia for that matter) but that has nothing to do with that gun. The ak47 is one of the best rifles in the world. My brother owns one and it's amazing. I own the SKS; It's amazing as-well. It's "Cheap" Because they mass-produced the hell out of it. Like the ak47. Its an amazing gun. It may not be a AR-15 but it has its advantages over 1000$ Guns. So stop trolling.
it's been a looong time coming, been pre-ordered for a year. Looking awesome! Now to find a decent price on a Chinese or Russian one. Shouldnt be too hard since I don't care about furniture condition or matching #2 LOL
Don't remove the negative comments, anyone who looks at what you guys have put together can clearly see that the wait was worth it. Nice job, look forward to getting mine... waiting a year was painful, but appears to be worth it.
@mpeugeot I agree don't remove comments posted. tbt10f's comment was just an internet cop statement about how the rifle wasn't safety checked right off the bat so the internet could see that it was unloaded. At 1:45 the rifle is proven to be unloaded when the magazine is removed and is obviously empty. I don't see what the big deal is since I would check my weapon to ensure it was unloaded before I started filming a video (unless of course it was a shooting vid). Safety check doesn't hurt though
Great - a black rifle filmed against a black background and a lady in a black dress. Also, poor lighting and plenty of dark shadows. Aside from that, an informative video. Gets better around 3:42.☺
I cant wait for mine to get in, but can some one give me some advice on removing my front sight? I looked around and from what I've read, there is a tool specifically for removing it. Is this the right way to go or is there a way to do it with a tool I probably already have?
toasty4000000 2 weeks ago
@toasty4000000 To remove the entire front sight/bayonet lug assembly on anything other than a yugo- you simply need a punch and a hammer. tap out the 2 pins...one on top and one in the rear of the sight "slide" and a little heat and a few whacks and voila...she will come right off. if you have a yugo and want to remove the grenade launcher..you need a tool...best way to do that one.
77tbrd 2 weeks ago
I just received a response back from SGWorks
westgl2006 3 months ago
@westgl2006 What did it say?
aemptybottleof151 2 months ago
This has been flagged as spam show
Is anyone else that has placed an order with SGWorks having a problem getting a hold of these guys, are they still in business?
I called them on the phone nothing, I sent a couple of e-mails Nothing
westgl2006 3 months ago
I just finished watching both parts of the assembly, has any one purchased and used this kit in the field at all? Any reviews yet? Is this as dependable as it is made out to be? It looks great and all but... ?
anEELinDM4 9 months ago
I bought mine a few days ago. Don't care if it takes a few months. I bought a Hammer/Sear/Trigger kit from Murray's Guns to be compliant. I tried to find an American made fixed 10 round mag but I couldn't find one made of metal. The kit from Murrays was $85. Counts as three pieces. Removing the handguard and FSB took me under compliance. I live in CA so its rough, but removable mags for the SKS are a crapshoot anyway.
biosurvival 10 months ago
hi just want to know if there really is a 6 month wait? thanks
xxxragonxxx567 10 months ago
Is this stock legal in Canada, cuz I'd surely like to get my hands on one.....
Rossco139 10 months ago
does someone know if they ship the stock kit outside the US?
KEVINMEJIA15 1 year ago
Anyone from California have one of these, I was thinking about buying one but with all the commi regulations I dont know if that will be possible.....
NOV31991 1 year ago
You put your underage daughter up there on the Internet and someone made a vulgar comment? Gee, never would've seen that coming ROLF.
Apparently a good rifle-designer does not a good father make.
w3bj3d12 1 year ago
@w3bj3d12 first off the underage comment what does that mean, shes putting a gun together not sipping some of grandpas cough medicine, next i know as you do also, that the worlds not perfect but really should her father have had to worry about a vulgar comment, or should there not be immature people in the first place to leave them, ur comment sounded to me like you are less against vulgar comments, and more for people changing their videos to some overly modest universally friendly trash heap
AudioGardenSlave123 9 months ago
how do you remove the front sights, and the bayonet mount? because i think this would look ridiculous with those, and when will you have these in mass production so you can send them as soon as you get them?
Dmajorproductions 1 year ago
@Dmajorproductions You can remove the FSB by tapping out the 2 pins holding it in place on the barrel. Then, you heat the front sight area, then the bayonet lug. You tap the bayonet lug toward the end of the muzzle, removing it. Usually, this is hard as hell because the FSB is happy where it is and doesn't want to come off. You can angle the rifle muzzle down, buttstock up, then place a block of wood on top of the BL, then hit with mallet, taking care not to strike the barrel. Good luck.
biosurvival 10 months ago
Still waiting on mine :( Hopefully only a couple more months, can't wait. Already have a foregrip and red dot sight picked out :) Just wondering......Anyone put one of these on a paratrooper sks yet???
bad300sport 1 year ago
She's got nice hands and fingers..........
CreoleCommando 1 year ago 8
beautiful wood stock
sttupid idea to remove it
druisten3 1 year ago
@druisten3 Bugger off Ivan... Tired of you people acting like the SKS is the holy grail of all things gunnery. It's a cheap $250 commie rifle.
chezypuuf 1 year ago 4
@chezypuuf
lol i see you live in usa ...........
go to europe and u understanf the fac to preserve ( in illégality ) a old gun ,
druisten3 1 year ago
@druisten3 Will I also learn how to type in broken English?
chezypuuf 1 year ago
@chezypuuf It's certainly not the holy grail of all things gunnery, but it's the holy grail of its price range. That's why it's so popular.
ZrazorRozenstrauch 10 months ago
@chezypuuf The origin of the gun has nothing to do with it. I don't like the former USSR (Or present Russia for that matter) but that has nothing to do with that gun. The ak47 is one of the best rifles in the world. My brother owns one and it's amazing. I own the SKS; It's amazing as-well. It's "Cheap" Because they mass-produced the hell out of it. Like the ak47. Its an amazing gun. It may not be a AR-15 but it has its advantages over 1000$ Guns. So stop trolling.
DillontehHAXer 1 month ago 2
@druisten3 crappy wood stock there are many that are nicer.
lynette1953 1 year ago 2
Even though it is a manly thing like rifle assemble, you cant show cleavage while your doing it. It didnt learn a damn thing!
ditchwaterwarrior 1 year ago
nice sweet thanggggggg!!!
basskillaz 1 year ago
@glaros5
Imagine if a foreign army orders your kit in masses. You'll be soo rich.
JacobTheIndoAmerican 1 year ago
For the record, I deleted my comment, I noticed that on a second viewing, while she didn't clear the rifle, there was a note saying to check it.
tbt10f 1 year ago
Can't wait. Seriously, if this takes another month to go to market I'll go crazy.
Hammerhead6814 1 year ago
it's been a looong time coming, been pre-ordered for a year. Looking awesome! Now to find a decent price on a Chinese or Russian one. Shouldnt be too hard since I don't care about furniture condition or matching #2 LOL
phugedaboudet 1 year ago
Don't remove the negative comments, anyone who looks at what you guys have put together can clearly see that the wait was worth it. Nice job, look forward to getting mine... waiting a year was painful, but appears to be worth it.
mpeugeot 1 year ago
@mpeugeot I agree don't remove comments posted. tbt10f's comment was just an internet cop statement about how the rifle wasn't safety checked right off the bat so the internet could see that it was unloaded. At 1:45 the rifle is proven to be unloaded when the magazine is removed and is obviously empty. I don't see what the big deal is since I would check my weapon to ensure it was unloaded before I started filming a video (unless of course it was a shooting vid). Safety check doesn't hurt though
richtherake 1 year ago
@mpeugeot The comment was vulgar that is why it was removed.
glaros5 1 year ago
Comment removed
fight4yourfreedom1 1 year ago
Can't wait to get a hold of mine. Molds look very clean and well thought out.
SuperiorAutocraft 1 year ago
looking forward to getting it.
weaponeer 1 year ago
Great - a black rifle filmed against a black background and a lady in a black dress. Also, poor lighting and plenty of dark shadows. Aside from that, an informative video. Gets better around 3:42.☺
wuffos 1 year ago
looks great. can't wait to get mine in the mail!
richtherake 1 year ago
I love this stock!
Thanks Mr. Черник
Mihka 1 year ago
Comment removed
tbt10f 1 year ago
also, once you remove the sight, the leaf spring will fall out.....i would remove that so it doesnt come loose and rattle around inside your kit.
lowjee 1 year ago