K series, right? They all sound a bit like typewriters at idle. Agreed, injectors. With a thin walled tubular header, you'll hear them "ticking" when the cam advances enough to begin opening the intake valves while the exhaust valves are still open (overlap). Freaks a good many people out who put headers on K-series.
and at idle, there isn't enough air moving through the engine to drown out the injector sound... nor is 14hz audible to humans (850rpm)... so the only sound you get is the injectors. tick tick tick
yes almost all honda 4 bangers sound like a "sewing mechine" valve train but this one is a little noisy, liek someone mentioned before, make sure you run premium fuel. some of it is the injectors but this is a valve noise. deff have a honda dealer check it out.
lol i'm sorry i just had to comment on this after reading the comment... this is a k20. from the looks of the mani it's a k20a2 (type-s). just saying... :P
Its not a K series huh, funny cause the intake manifold is in the front(k-series) the valve cover in silver and rounded(k-series), your not very good at selling parts if you dont even know what to look for, go back to your parts counter and stop shit talking.
@quintero247 haha thank you! lol it is SO a k series motor, besides why would someone swap a NOT k series into an rsx.... unless it was better than a k.... which would be an f20 n its rwd
@alvardie Thats not an oil change child, it needs to a valve adjustment, pretty pathetic to feel good cause you called some one you dont even know a cheap punk!
Those are the fuel injectors. I've had a k20a3, k20a2, and a k20z1 and by far the k20a2 injectors are the loudest for some reason. I'm sure you've got it "fixed" but for anyone else wondering, it's just the k20a2 fuel injectors...
this is k series its supose to sound like that dont worrie its nomal! not sure about other cars with kseries but i know for sure all rsx sound like this and a fill 08 civic si.
@63lmorales@63lmorales You might call it a K series in the U.S but it is not a K-series over here, I should know i've only had 3 of them. For a start late K-series didn't have a twist lock oil cap, their screw in & the inlet is at the back not the front,
So learn to..... 1, Know your engines, 2, Spell properly its knob not noob & finally shut the f**k up when your wrong you over weight baboon !!!
@63lmorales@63lmorales You might call it a K series in the U.S but it is not a K-series over here, I should know i've only had 3 of them. For a start late K-series didn't have a twist lock oil cap, their screw in & the inlet is at the back not the front,
So learn to..... 1, Know your engines, 2, spell properly its knob not noob & finally shut the f**k up when your wrong you over weight baboon !!!
Ask some shops, or do it yourself if you got the tools.
Pick up a manual for your car if you are really lost, itll explain how to do almost everything and give you an idea if its too hard for you to do yourself.
Your engine is cold let the engine warm up and the valves should be quiter. My accord does this same thing. Geeze honda owners need to chill on the valve tapping issues just be watchful on rod knock noise.
i have a k20 hatch and i had the same problem, i reajusted the valves, it helped a lil but it seem than this noise is normal, still on my mind though.
dude i have an 02 ep3 with 40000km's, makes the same noise getting it checked out at honda today ill post ya what is found on it! thanks for posting this iv been looking all over seeing if anyone else has this problem!
everyone else whats the miles/km's on yer vehicle when did you first adjust vavles ???
I basically did an oil change and valve adjustment, and it seems a lot quieter now. I was told by a few people that this series of engines is supposed to make that sound. So I am not worried about it that much.
There right i have a 03 Type-S and i when i first heard it i was like "oh shit...not a good sound" lol It's deffinently a normal sound i think its more a less a broken-in noise IMO.
@vovan777kz what octane of fuel do you use? i do believe that the recommended octane for the K20A2 is 91, that could be why your hearing a little knocking due to detonation.
Comment removed
mmarkomann 2 weeks ago
K series, right? They all sound a bit like typewriters at idle. Agreed, injectors. With a thin walled tubular header, you'll hear them "ticking" when the cam advances enough to begin opening the intake valves while the exhaust valves are still open (overlap). Freaks a good many people out who put headers on K-series.
jimzamerski 4 months ago
and at idle, there isn't enough air moving through the engine to drown out the injector sound... nor is 14hz audible to humans (850rpm)... so the only sound you get is the injectors. tick tick tick
jimzamerski 4 months ago
If you want to know if you need a valve adjustment, smell the oil in the valve cover...
if it smells like oil... that is awesome
if it smells a little bit like gas, okay...
if it REEKS of gas and you drive like a total a-hole, that is why, and you should change your oil often...
if it REEKS of gas and you drive like a granny 99% of the time... consider a valve adjustment
jimzamerski 4 months ago
just smell the underside of the oil fill cap
jimzamerski 4 months ago
sounds normal
pkev715 4 months ago
it's injectors
coreyniz9 4 months ago
This has been flagged as spam show
Can someone look at the video on my page and tell me what they think might be causing my engine to make a diesel like noise
bwittle2011 5 months ago
injectors are quite loud they need to be cleaner or replaced, can hear another noise which would probably be the valves
h2cker 5 months ago
LMAO Screw Honda! Honda for life! Do you guys even hear yourselves?
nightmathzombieethan 6 months ago
Rsx is fucking garbage. Integra for life
acuratlnigga 8 months ago
@acuratlnigga The RSX IS the Integra.....furthermore, the ONLY good Integras were HONDA's, not Acura's.
darthjader08 6 months ago
thats deffinatly a hydrualic not making pressure run a thicker oil when its real hot out
uhhhhwhat 8 months ago
Valve adjustment
kuvuakoj 9 months ago
Need vav
kuvuakoj 9 months ago
hey man did you find out what the noise was sounds like my type s?
emerica9110 10 months ago
valve tick
RyanEagen 10 months ago
just reset the valves every 15000k its easy and does wonders for your engine
mcfoolskully 10 months ago
My Honda Civic has been doing that for about 50k miles!
basenjib123 1 year ago
that is not your valves. slick 50 the oil. could possibly be a collapsed lifter or two.
kraden18 1 year ago
yes almost all honda 4 bangers sound like a "sewing mechine" valve train but this one is a little noisy, liek someone mentioned before, make sure you run premium fuel. some of it is the injectors but this is a valve noise. deff have a honda dealer check it out.
chevyblows2001 1 year ago
not a k20
chassidysbaby2010 1 year ago
oh hah in description it says that it's a type s lol silly me i didnt even read that part XD
Sm0kiNAc35 1 year ago
lol i'm sorry i just had to comment on this after reading the comment... this is a k20. from the looks of the mani it's a k20a2 (type-s). just saying... :P
Sm0kiNAc35 1 year ago
Its not a K series huh, funny cause the intake manifold is in the front(k-series) the valve cover in silver and rounded(k-series), your not very good at selling parts if you dont even know what to look for, go back to your parts counter and stop shit talking.
quintero247 1 year ago
@quintero247 haha thank you! lol it is SO a k series motor, besides why would someone swap a NOT k series into an rsx.... unless it was better than a k.... which would be an f20 n its rwd
enjoiyoutube 1 year ago
Comment removed
quintero247 1 year ago
change the oil cheap ass punk
alvardie 1 year ago
@alvardie Thats not an oil change child, it needs to a valve adjustment, pretty pathetic to feel good cause you called some one you dont even know a cheap punk!
quintero247 1 year ago
ok well i have an integra with this same problem and have no clue wat it is im going to try a valve adjustment and see if that works...??
kyleadcock11 1 year ago
Those are the fuel injectors. I've had a k20a3, k20a2, and a k20z1 and by far the k20a2 injectors are the loudest for some reason. I'm sure you've got it "fixed" but for anyone else wondering, it's just the k20a2 fuel injectors...
MrChrisRatliff 1 year ago
those are the valves your hearing. ive got a rsxs too and its ok
ssinn 1 year ago
Even with the proper oil it sounds like that. Usually if a car is low on oil you'll hear the valves sounding like that.. Wow I'm shocked.
gsxellence 1 year ago
this is k series its supose to sound like that dont worrie its nomal! not sure about other cars with kseries but i know for sure all rsx sound like this and a fill 08 civic si.
maihermoua 1 year ago
@maihermoua its not a K series at all.
Dazboss1 1 year ago
@Dazboss1 you must not know about hondas/acuras if you say this motor isnt a k series.
63lmorales 1 year ago
@63lmorales
That engine there in the video is not a K-series. It don't even look like a K-Series. I sell car parts all day long & i know what engines are what !
Dazboss1 1 year ago
@Dazboss1 omg dude this is a k series you noob, fucking stupid
63lmorales 1 year ago
Comment removed
Dazboss1 1 year ago
This has been flagged as spam show
@63lmorales @63lmorales You might call it a K series in the U.S but it is not a K-series over here, I should know i've only had 3 of them. For a start late K-series didn't have a twist lock oil cap, their screw in & the inlet is at the back not the front,
So learn to..... 1, Know your engines, 2, Spell properly its knob not noob & finally shut the f**k up when your wrong you over weight baboon !!!
Dazboss1 1 year ago
This has been flagged as spam show
@63lmorales @63lmorales You might call it a K series in the U.S but it is not a K-series over here, I should know i've only had 3 of them. For a start late K-series didn't have a twist lock oil cap, their screw in & the inlet is at the back not the front,
So learn to..... 1, Know your engines, 2, spell properly its knob not noob & finally shut the f**k up when your wrong you over weight baboon !!!
Dazboss1 1 year ago
@Dazboss1 lol u sell car parts but you dont have a clue about cars xD FAIL ! OWNED ! EPIC FAIL ! NOOB !
walteratomspalter 1 year ago
@walteratomspalter
Prove it a K-series then ? Ive worked on many K-series engine & that isn't one. End of.
Dazboss1 1 year ago
@Dazboss1 why prove?i drive a accord type-s with k24 ;)
walteratomspalter 1 year ago
@Dazboss1 lmao... this is a k20? acur sign on top? obv a k20
enjoiyoutube 1 year ago
@enjoiyoutube
So its a 20v K-series ????
K-series only did 8v & 16v.
Dazboss1 1 year ago
@Dazboss1 haha no man they did a 20 and a 24 too
thebongsong1 1 year ago
@Dazboss1 this is a kseries motor numb nuts
BigBoiPete 1 year ago
valve adjustment..its a common thing in hondas...i had the same problem in my accord
2jzgteSupraJZA80 1 year ago
needa adjust your valves man
kevinef8bb4 2 years ago
your valves need to be tightened or loosened
billythekid41293 2 years ago
measure you valve lash
jeflagoon 2 years ago
im having a similar problem, 99 accord 4 cyl
ka7end 2 years ago
Its the gas, that etho is gumming up valves and messing up the ignition sequence
octoma 2 years ago
man my 08 si with 17000 miles sounds just like that
08si138 2 years ago
is there a balance belt on this model?
fochie 2 years ago
extremely loud injectors??? thats my part in it
LV2DFT 2 years ago
if it matches your rpms then its a valve tick.. use thicker oil n some oil treatment n u shud b good.. plus a valve adjustment
plinton876 2 years ago
its gotta be the hydraulic lifers not getting oil...
rb26xs14 2 years ago
it doesn't have hydraulic lifters
eulluisgtr34 2 years ago
Get a valve adjustment. Does it have forged pistons? If so, it could be piston slap as well.
ITRlover1 2 years ago
how much is it for a valve adjustment on a 4 banger?
sprijic2 2 years ago
Not sure, I have always done it myself
ITRlover1 2 years ago
its not a big deal to take off the rocker cover but what tools would i need?
sprijic2 2 years ago
Ask some shops, or do it yourself if you got the tools.
Pick up a manual for your car if you are really lost, itll explain how to do almost everything and give you an idea if its too hard for you to do yourself.
Timothayyy 2 years ago
Your engine is cold! It takes time to get oil up to those noisy lifters. Use lucas oil and you wont have a problem!!!
garrett6699 2 years ago
Your engine is cold let the engine warm up and the valves should be quiter. My accord does this same thing. Geeze honda owners need to chill on the valve tapping issues just be watchful on rod knock noise.
egn2020 3 years ago
check your oil level as well
420HondaBoost 3 years ago
i have a k20 hatch and i had the same problem, i reajusted the valves, it helped a lil but it seem than this noise is normal, still on my mind though.
manriquizel 3 years ago
check the rockers one of them could be loose, had the same thing on my cousins 350
danmaneah65 3 years ago
obnoxious honda/acura door chime
cconant13 3 years ago
if your car sounds like a diesel, it might be something you wanna get looked at. check the valve spring tension
vsgr10 3 years ago
thats normal on these cars, it gets better once its warmed up
7ROJ4N 3 years ago 2
How can you tell the difference between valve noise and injector noise??
JayZoop 3 years ago
yeah its a valve knock and if you ppl say its not i own a dsm i slap valves all day
dsmincontrol 3 years ago
yeah i think its injectors
somanymods 3 years ago
adjust the valve clearence!!! sell the engine 2 me ile do it!
k20Lver 3 years ago 2
maybe the oil pump chain guide is broken
boxtogo 3 years ago
dude i have an 02 ep3 with 40000km's, makes the same noise getting it checked out at honda today ill post ya what is found on it! thanks for posting this iv been looking all over seeing if anyone else has this problem!
everyone else whats the miles/km's on yer vehicle when did you first adjust vavles ???
tekkielite 3 years ago
did you find out what was wrong with it? i have the same prob
BjD775 3 years ago
I basically did an oil change and valve adjustment, and it seems a lot quieter now. I was told by a few people that this series of engines is supposed to make that sound. So I am not worried about it that much.
vovan777kz 3 years ago
my DC5 does the same thing. I adjusted the valves and readjusted them. These motors are just naturally noisy like that
BoostedxDC5 3 years ago
Thats because they're shitty.
CamaroTBI 3 years ago
There right i have a 03 Type-S and i when i first heard it i was like "oh shit...not a good sound" lol It's deffinently a normal sound i think its more a less a broken-in noise IMO.
Bloodlyne357 2 years ago
@vovan777kz Yep, All honda engines have some good ole' valve tap. If it's audible from the Cabin, Then you have a problem
jdmcivic91 1 year ago
@vovan777kz what octane of fuel do you use? i do believe that the recommended octane for the K20A2 is 91, that could be why your hearing a little knocking due to detonation.
potsmoker5000 1 year ago
i think theres some rice stuck some where in there
what456789 3 years ago
might be the injectors have someone look at it to be sure
zeppdogg 3 years ago
Thanks man. I will bring to a mechanic see what he says. It's speculation but I think it sometimes sounds like an exhaust leak...
vovan777kz 3 years ago
It's your injectors my 2008 si sounds the same.
w00t692 3 years ago