Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (169)

Sign In or Sign Up now to post a comment!
  • i rooted my captivate with continuum nd its sort of bricked, it juss freezes on the boot logo thingy when i turn it on, do u think this will fix it by any chance?

  • It won't show on the Odin3 when I put the phone into downloading mode. Help?

  • Hey there, this video is awesome. It worked like a charm, just as fast as in the video. Thanks a million.

  • I am having an issue with this on my captivate. At about 8min 30sec on your video during the download your phone boots back up mine just bricks. Stays on the charging screen and I have to use a jig to get it to download mode and flash a custom rom to boot back up. The same rom that I'm trying to get away from cause no applications seem to work with it (Force Close Errors). Any other suggestions for what I can do?

  • It worked perfectly thanks I had been looking for so long to find a how to video. This is so helpful.

  • the restore worked ok but at the end when i try to initialize samsung kies in my phone it keeps restarting the samsung kies initialization. any ideas? thanks

  • No matter what mine bootloops

  • Worked exactly like your video. Thanks!

  • My computer says "USB not recognized" when I plug it in while it's in download mode. I have all the drivers installed. I'm so frustrated because I want to flash back to stock but it won't work. Any suggestions?

  • Will this work if I officially updated to 2.2?

  • i love you

  • Thanks So Much ( Every Detail Counts ), i should have know to take out the battery lol thanks again =)

  • Is this work for Samsung S GT-i9000 ????

    Please Reply

  • can i do this to my phone samsung monte?

  • tried this and my phone's bricked now. can't use it anymore. it's blinking AT&T boot logo, that's all. HELP!

  • my phone just keeps on flashing the at&t world phone screen after I did these steps .. I cant even get to the recovery screen any more... what am I doing wrong? any help??? please thanks...

  • thanks man we just fixed our phone after hours of trying other peoples methods. way to go on a great video on helping us

  • i have a Huawei Ascend and i desperately want to remove cm7. I have no idea how to put it into download mode, and idk how to use Odin. Plz Help!

  • Great vid

  • If i am using serendipity 6.4 and want to install cm7 could i do this? Or would that brick my phone. Also is there a easier way fo switch roms?

  • Thank you so much you saved my life

  • Thanks so much now I just need to re-ROOT into CM7

  • I did the same method and I unplugged my phone. Now whenever I try to turn it on the ATT logo keeps flashing and the phone doesn't boot. If I try to plug it into the computer the battery meter shows up but doesn't show the charge and the loading circle is on it. Is there a way to fix this?

  • @BlinkPhaseVidoes Hi I'm new to this phone thing, I tried the SAME exact method with my Captivate but when it finishes the Odin process it goes to the AT&T Logo then it flashes over to the battery stand by and that's it ... What am I doing wrong? Do I have to root it or something?

  • excellent video loved it thank you so much

  • The video steps are flawless. Software was a big download, but it worked. I came here to reset my phone so that I could take advantage of my two year warranty with Radio Shack and get the battery replaced. After only 11 months the battery does not hold a charge over night. This video was GREAT! and delivered exactly what it promised.

    How do I buy you a beer?

  • THANK YOU SO MUCH FOR SAVING MY PHONE!

  • I just wanted to add another thank you. I had all the stuff downloaded from xda and had been working on it feverishly last night to get everything working again (a failed kies attempt screwed me over and bricked the phone telling me i should have just stayed with eclair). Got to the point last night where it would at least boot up, but it had no idea what a sim card was. Your walk-through saved me a trip to the store to ask for a new phone. Thank you!!

  • Thank You!! You are helping my trial and errors of rooting!

  • CAN SOMEONE HELP ME, I DID THIS TO MY PHONE AND NOW IT SAYS ITS A AT&T PHONE EVEN THOUGH I LIVE IN CANADA AND ITS A "ROGERS" PHONE, I NEED IT BACK to a ROGERS phone ! HELPPP :(

  • @BlinkPhaseVideos i live in canada and i did the reset and now it is like this is a at&t phone when it doesnt exisit in canada lol help? (it is a rogers phone)

  • omg!! THANK YOU!!!!!! :) 

  • @xwaempix no I didn't try the jig thing I'm just ususing a different phone for now

  • Thank you so much for such an easy to follow, step by step video. I am the LEAST tech-savvy person I know, and after upgrading to the 2.2 OS a few days ago, I had nothing but issues with my phone. I fret all day about whether I should attempt to restore to the 2.1, but I just completed it, and my good ol 2.1 phone is back in business! THank you!

  • Thank you very much. I really appreciate it.

  • will it work for samsung galaxy 5 

  • this shit i grimey... i lost my android keyboard, and Edge Connection... wtff....

  • Thanks perfect explanation and everything worked for me !!!!!!

  • I did everything u did and my phone all it does now is blink the AT&T logo what can I do can u help me plz!!! 

  • @littlemonster1531 i have the same problem . have u found any solution ? have u tried jig ?

  • mine isnt running like urs is. my phone went throught brick mode and its stuck. i did everything you did but nothings happening. besides file analysis. what do i do?

  • NOTE: Odin has problems running under Win7 64-bit. you will need to set the compatibility to Windows SP SP3 or SP2, then run as admin for it to download the files.

  • @godsfifa i dont know prob not cause it pushes the att touchwiz stock firmware

  • Will this unbrick a phone?

  • @littlemonster1531 yes as long as it is the captivate

  • thanks man you made it really simple for me. i really needed this because my speaker is going out and i have to send it in. thanks alot again

  • Thank you so much! My son is so excited when he got home and his phone was restored to factory settings. You are amazing, to take the time and show people how to fix their messed up phone. Again thank you,

  • @dweino06 im just the middle man lol the real work was done by the devs who wrote the software

  • @BlinkPhaseVideos Can u give me the link to tht root you had on?

  • you're my hero! thank you so much

  • I'm an idiot...and it took me over a day to figure it out! But you for sure provided the similest directions on how to do this...even for noobs! I want to marry you right now!

  • @betsymaysent lol thx

  • I have windows 7 and it opens up a folder everytime I try to click on it... please help :(

  • @betsymaysent when u click on the original .zip or .rar whatever the file is lol it will be opened up by ur unzip program and from there u should see the program itself in that folder u need to drag it out then run it

  • @BlinkPhaseVideos ha ha just realized that was u again lol sry

  • Comment removed

  • You have no IDEA how fantastic you are! Serious! I love you.

  • @iKristina1980 do you think its works in any samsung mobiles??

  • @gReffsHy04 No. It specifically says on the website for Captivate only =(

  • @iKristina1980 ahhhhhh ok thinks... i thought it would work for my phone :'(

  • is this will work to any samsung mobiles?????

  • hey dude is this would work to sgh-f488e????

  • Worked Great! Thx, I unplugged my phone in the middle of the original upgrade and couldn't complete it again. My phone is working much better. Solved the problems I was having.

  • i did this but i didnt relize this was just for a Att i did it for my tmobile and now it keep flashing Att world phone... please help

  • YOU SAVED MY LIFE

  • I did everything in this video, but once Odin is done, and my phone is rebooting, it will stay on the AT&T homescreen, and then go directly to a charging reboot loop. Seen this problem before?

  • Just wanted to say great video. Very easy to do, and simple steps. Good job on the video. I did this on the 1st try with no issues whats so every. Thanks man! Thumbs up!

  • omg this is pissing me off. on my mac when i download the one click, it opens a text file and not the thing that opens for him can someone help asap

  • @alex313313 far as i know this only comes as an .exe file which is a windows only file

  • i noticed u had team fortress 2....awesome game

  • @knoddles if you tried it, let me know.

  • @knoddles haven't got around to it.

  • Hey man trying to do a master clear on my galaxy s using odin. Whenever i click master clear while in download mode of course, it just sits there and states "Master clear started...." it never seems to move. Any ideas of how this process is done?

  • @redgeeteeeye hey when u do a master clear u dont do it from download mode , just turn ur phone on and make sure u have usb debugging turned on and DO NOT MOUNT ANYTHING and then just run it , let me know if u get it to work

  • Worked great. Is there a fix for the lag on 2.2?

  • i don't have a rooting or unlocked captivate. I just upgraded to 2.2 but my battery life has significantly dropped. Is there anything i can do or is that expected with 2.2? Also, if i downgrade to 2.1 will i lose all my applications and data?

  • Hello Good Sir. I did everything on the video. And it went well - HOWEVER, my SIM Card won't register when I stick it back in. Any ideas on that?

  • Quick question. On odin3, mine gets stuck at file analysis. Do you have any idea what could be wrong?

  • @followlee the few times i have had that problem was because i had skipped a simple step but that may not always be the case , even though the captivates in theory should all be the same that just isnt the case , there like real computers and as many people know they can have a mind of there own , what works on one computer may not work on another. there are a lot of people that this works for and some that just cant get it to work and probably 6 out of 10 of them is because of the phone itself

  • I followed the steps but odin3 never picks up my phone. any ideas got proper drivers but windows says that usb device not reconized. can u help?

  • @1979rgarza have u tried a different cable cause when ur in download mode it should pick it up

  • I followed the steps but odin3 never picks up my phone. any ideas got proper drivers but windows says that usb device not reconized. can u help

  • Is your computer a Mac AND a Windows computer?

  • @levielgar lol nooob.

  • @sclek2007 My life isn't dedicated to technology. Sorry, I have a life.

  • thanx,thought i was doomed B-]

  • @Bakerskatepunk08 glad i could help

  • Will this allow me to update to official KB1 build using Kies Mini? By the way I'm on JI6 build if that means anything. Thanks

  • @ajp720 Let me know if it work cuz im in the same situation as you thanks

  • great my phones fucked up

  • @TheAnarchyKings define fucked up ( software brick ) ( Doesnt power up ) ( ????? )

  • @BlinkPhaseVideos It kept on restarting itself but i called AT&T and they gladly sent me a new one for free

  • I am stuck on the File analysis step how long is it supposed to take I've waited 10mins

  • @mobtownjag it shouldnt take but a min at the longest , ur stuck like other people have been i have a link in the first part of the video for those who cant get this to work so check it out and let me know if it helps

  • Great video. I have a simple question.

    Does one need to restore one's Samsung Captivate to factory firmware before flashing a new ROM?

    Also, if one has say Serendipity ROM and wants to flash to a different ROM, say Cognition, has one got to revert to factory firmware before flashing?

    Lastly, if one wishes to upgrade to a lates ROM in the sam family (eg. fro Cognition 3 to Cognition 4), does one need to revert to factory firmware?

  • @EazyTouches u dont have to but i always do just because i like clean installs and there has been a few times that flashing from 1 rom to another has caused problems like when a rom has a new kernel and u flash to a diff rom and leaves that custom kernel but the new rom isnt setup for that kernel so i would say yes flash stock then flash ur new rom

  • Awesome! ... this totally worked for me. I somehow installed a beta version of 2.3 and it was for the htc, not the captivate. Thanks!

  • ty, got me out of a jam

  • I followed all instructions exactly! but, after all was done and restarted i still have 2.2 not 2.1 and have no sound.. please help

  • Thank you so much. I had another phone's software on my phone and couldn't do anything about it. This helped me out a lot.

  • got nervous as hell cause mine got stuck on the "Do Not Turn Off Target" part in Odin but read some of the comments and took the battery out and just started over worked like a charm now I can download the Froyo that AT&T finally released....thanks man

  • I just want to say...thank you so much. I was just trying to get a custom ROM, and i needed to get it back to factory 2.1. I went to the Odin site, the exact site you are on, but it wasn't working. The instructions aren't 100% clear on the site. I had no idea that recovery mode and download mode were different...i just assumed they were different words. Thanks so much for clarifying this.

  • THANK YOUUU!!! VERY EASY!

  • i love you 

  • Worked the first time thank you very much !!

  • Just wanted to ask a dum question

    Does odin have all that original rom 2.1software in its program or does it find it on the phone...

    Thanks for the video

  • great instructions, thanks

  • I fucking Love You! It worked perfectly! Thanks man!

  • thank you thank you thank you

  • clear as day instructions....thanks very much...

  • The times I've had that happen to fix it all I do is exit out of Odin pull the battery out so u leave download mode the once that is good open Odin with right click and select run as admin the do the steps for getting in dl mode

  • I have a problem, i followed your video, but mi phone doest boot completely it keep turn on and off.

    I only see the at&t logo but nothing more. What would be the problem?

  • I need help my stays on file analysis.... how do i fix it

  • Hey, I followed all of your steps but my problem is at 8:55

    instead of booting up the phone, i get the batterry/att logo loop. i've retried it numerous times :( any ideas on how i can fix it?

  • Any way this is possible to do with Linux?

  • Thank you very much, I was scared that I had bricked my phone, but your video saved me :)

  • Worked like a charm! Thanks!

  • that link no longer works....

  • GREAT VIDEO!!!!

  • YOU ARE A LIFE SAVER, THANKS MAN

  • omg..please help me.. i didn't read the instruction that it was only for captivate.

    I have samsung galaxy S i9000, and i followed you steps exactly, and i'm stock on AT&t world phone on screen. i don't know what to do anymore. please help me. please please please help me..

    i'm begging you please help me. anyone? please help

  • hey men thank you for you video it help me a lot i was going crazy but after watching yours everything is good now.

  • YO! you are the best. perfect step by step to help me save my phone! i was scared i messed my phone up but i was able to fix it following your video. i just followed ur direction and now im back to stock! thank you bc the phone is too light to be a paper weight.

  • i have a captivate but im using it for with a tmobile sim card. if i do this would it still be unlocked?

  • i have done master clear and also the other option, and odin always tells me that everything was done sucessfully.. but everytime i go and look at my firmware version, it continues to say 2.2 ...i cant get rid of it

  • Thank you, just what I wanted.

  • mine just stays at the at&t screen, any help? could it be because i had a custom recovery before? that it deleted my normal recovery? PLEASE HELP I GOT MY CAPTIVATE TODAY AND ITS ALLREADY BROKEN UGH PLEASE PLEASE AS SOON AS POSSIBLE

  • @KoolSkate101 oh and when i hit "start" i doesnt take as long as yours, it takes about 3 seconds.

  • @KoolSkate101 oh yeah and sorry i keep forgetting to add things. My odin3 looks a little different than yours.

  • @KoolSkate101 what custom recov u using ?

  • @KoolSkate101 can u take a pic of it and send it to me so i can see how diff it is bphase0721@gmail.com

  • what would master clear do? like after running master clear will it restart with stock eclair, or would i have to do the odin3 one click start again to get stock?

  • @projectpaki that clears everything i believe and u have to just have ur phone plugged in and have usb-debugging mode on but not mounted and then press master clear but i havnt done it myself because it wipes ur internal sd card i think but u can just use odin to get back without doing master clear

  • @BlinkPhaseVideos i just tried it, u put usb debuggin and restart ur phone as it shuts off connect usb to odin and after atnt logo odin recognizes device and hit master clear... i did this bc i had a lot of folders from previous apps which i had already deleted and wanted a clean install

  • @projectpaki ok cool thanks i might have to do that to my phone lol

  • okay i have 32bitdrivers installed odin, i have it in download mode and everything but my com is com6 ?? not com3, so i went anyways and tried it and it stoped after it said do not turn off target so im stucckkk.

  • @JonahhChavarria did u have odin running first and did u run it as admin ??

  • Comment removed

  • @BlinkPhaseVideos Does this unroot you phone in the process?

  • @FULLxTIMExHITMAN yeah it does 

  • i cant even go into download mode... ive tried everything and it just starts charging... no yellow sign just the battery

  • @Ricankid616 have u tried a different usb cable but if that doesnt work u might have to do it through adb

  • yes i have a captivate i run as admin. i have the drivers install. i have phone in download mode everything. it even saids added in odin but when i hit start or master clear it stops for start it stops in file analysis and for master clear it stops in master clear started. many people on the xda link have had the same problem in the first page they talk about this same issue. You seem to be able to make it go threw some how. im not a noob just a bit lost . hope you can help

  • @hydrobud99 im going to look into it just give me a day or so ill be at work tomorrow but when i get off ill get to it and see if i can think of anything umm u had odin running first ? and maybe try closing out odin leave ur phone in dl mode just unplug the usb cable turn odin back on and plug the phone back in and master clear doesnt work in dl mode ur phone has to be on and with usb debugging mode on and then run it but ill let u know something soon

  • @hydrobud99 just trying to cover everything i know u said u have the drivers installed but u have the ones from the odin3 link right ?? cause i have 2 different sets of drivers installed on my computer one i got from the link and the other from samsung i believe

  • hey man can you help me out i have done everything in the vid. and i have read all of the threads on xda but it gets stuck on File Analysis and it wont go anywhere from there . i have tried doing everything ive read and in ur vid. HOW do you get it to go past Fie Analysis. hope you can help me thanks

  • @hydrobud99 just to get the simple ones out the way did u right click and run as admin cause that will keep it from working and u have a cappy right ?

  • hi. does this work on GT-i9000? if not do you know how i could reset it to its factory firmware

  • @vitalpart i dont believe so it pushes the stock AT&T firmware plus bloatware but im looking now on xda for somthing that might help u . hey which carrier do u have with the I9000??

  • @BlinkPhaseVideos im in the uk and the i9000 im using came from vodafone, phone is unlocked as im using a different sim now but when i updated it last time on kies for 2.1 update 1 i got bloatwares from vodafone i.e. voda360 etc which i think prevents me from updating to froyo that is why i want to get back to factory firmware. haven't tried any flashing or any of the sort but im sure i could follow instructions, do you reckon i should try? and would doing so let me update to froyo?

  • I swear you just saved my ass!!! My phone was bricked liked a mofo!!!!! I couldnt get odin to run and you saved me... seriously!!! Thanks bro!

  • @mgarciamma Just glad to hear u got ur phone back

  • how do i know if i have the drivers?

  • @skateforeverb what do you mean? After installing the drivers and before trying this procedure, connect your phone to your computer. If your computer is able to recognize your phone, your good. If you do not know if you have the drivers installed, then you probably should not be doing this.

  • @tbolt1973 ok i have them installed but my phone wont go into download mode i tried like five time and my battery icon just comes up..

  • @skateforeverb nvmd i figured it out lol. took me a lil while but its all good now. THAAAAANKSS!

  • @skateforeverb glad u got it. for some reason i havnt been getting email updates from youtube so i didnt know u left a comment my bad but good to hear u got it

  • You are a life saver!! This worked perfectly. Thumbs up for the video, it saved me a huge headache.

  • @tbolt1973 no problem man glad i could help

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more