Is it true that it's not advised for a common layperson to remove all the strings at one time? Different threads are warning about that sternly.
I came into a Rhythm Band "Port-A-Harp" 15 bar chromatic in great condition except for broken high octave C and F strings. But the thing is incredibly dirty, so dirty that blowing with keyboard cleaner does nothing to remove the baked on dust, and neither does running a micro fiber cloth under the strings.
I use a AT-12 Korg Digital tuner for my autoharp. It has over a 3 octave range. Over time I've found that it's easier to use the digital tones that it produces as opposed to using the analog meter. Reason being, the needle reacts to the harmonics of the other strings and it's a lot more difficult to reach the zero-point reference on the needle scale. By using the digital tones, I use the tuning wrench to cancel out the "beep tone" to reach the right pitch.
Have you ever tuned your autoharp with a chromatic tuner and had several of the strings tune to the same note? For example, my F and F# on the first octave are all the same note, as are my A and A# of the second octave. This is my first time tuning my autoharp, as I'm sure you can tell.
@notkablammo Sorry - just came across this. If you have two notes tuning to the same note, and the felt is open at both strings, someone might have set that harp up as a diatonic, or the felt has just disappeared, and would need to have a piece of felt re - glued in the opening of the wrong string. If you can't get the felt, let me know -I have felt from many old harps, and can send you some. Bill
I use a standard chromatic guitar tuner- works just fine! Also a note about needle jumping around: if you pluck the string really hard, it will always read sharp. As the note decays, it will decay flat, hence the flat reading. My recommendation would be to try to pluck strings firmly, and always repeat to get an accurate reading. Of course the best way to tune is if you have a mic or pickup to plug into the tuner.
Thank you for sharing your tips on tuning online. I just started replaying my autoharp after letting it sit for 20 years so I was in much need of a tuning. I have tuned my guitars easily enough but I was daunted with the task of tuning all those strings. I also learned some additional tips I can use in tuning my other stringed instruments. Thank you so much!
This has been flagged as spam show
Is it true that it's not advised for a common layperson to remove all the strings at one time? Different threads are warning about that sternly.
I came into a Rhythm Band "Port-A-Harp" 15 bar chromatic in great condition except for broken high octave C and F strings. But the thing is incredibly dirty, so dirty that blowing with keyboard cleaner does nothing to remove the baked on dust, and neither does running a micro fiber cloth under the strings.
I really want to clean the scum off it mind.
XmyAssYTmofo 3 months ago
How often should one change the strings?
bodywiseproducts 1 year ago
I use a AT-12 Korg Digital tuner for my autoharp. It has over a 3 octave range. Over time I've found that it's easier to use the digital tones that it produces as opposed to using the analog meter. Reason being, the needle reacts to the harmonics of the other strings and it's a lot more difficult to reach the zero-point reference on the needle scale. By using the digital tones, I use the tuning wrench to cancel out the "beep tone" to reach the right pitch.
k4jdp 1 year ago
Have you ever tuned your autoharp with a chromatic tuner and had several of the strings tune to the same note? For example, my F and F# on the first octave are all the same note, as are my A and A# of the second octave. This is my first time tuning my autoharp, as I'm sure you can tell.
notkablammo 2 years ago
@notkablammo Sorry - just came across this. If you have two notes tuning to the same note, and the felt is open at both strings, someone might have set that harp up as a diatonic, or the felt has just disappeared, and would need to have a piece of felt re - glued in the opening of the wrong string. If you can't get the felt, let me know -I have felt from many old harps, and can send you some. Bill
gfharper 1 year ago
I use a standard chromatic guitar tuner- works just fine! Also a note about needle jumping around: if you pluck the string really hard, it will always read sharp. As the note decays, it will decay flat, hence the flat reading. My recommendation would be to try to pluck strings firmly, and always repeat to get an accurate reading. Of course the best way to tune is if you have a mic or pickup to plug into the tuner.
edwinaugust 2 years ago
The Korg CA30 has now been replaced with the Korg CA1 which is the newest version of the Chromatic Tuner and is available online.
Robinin09 2 years ago
Thank you for sharing your tips on tuning online. I just started replaying my autoharp after letting it sit for 20 years so I was in much need of a tuning. I have tuned my guitars easily enough but I was daunted with the task of tuning all those strings. I also learned some additional tips I can use in tuning my other stringed instruments. Thank you so much!
Robinin09 2 years ago
I just bought my autoharp & am learning. Can I use a Korg CA40 todo the tuning? Thanks for your help.
TheSunflower69 2 years ago
Not familiar with the 40, but if it is a chromatic tuner, then it should be fine.
gfharper 2 years ago
Just what I was looking for--thanks for posting!
Isoquant 3 years ago
I think it works with a guitar tuner! If it's a chromatic guitar tuner!
Baasting
baasting 3 years ago
Not sure of a guitar tuner - this is a Korg CA 30 chromatic tuner. Bill
gfharper 3 years ago