@samanthasavage4 Sure you can. just be careful to only sand the run surface rather than the clear that surrounds it. When it is smooth or fairly smooth. re apply clear and keep sanding smooth. Easy as that!
@debobeats Yes I am and Expert Painter. Look at my end work. It dont lie. Duplicolor is the professional grade of 4-5$ spray cans. See, you just learned sumthing new... Dont hate the Playa... RH DSD
A question...? i think i will paint my scooter and i wonder how many coats of the different paint i need? primer/paint/clear coat?? Plz answer as soon as possible
@T0BBi94 dont use spray can paint seriously ever!! and dont ask that guy for advice any one that needs professional painting advice can call me @ 832-627 0809 my name is Ed i own MXMS Kustom Shop i paint bikes and do tank and fairing repair for a living
does it make sense to use a hair dryer to fully flash out the solvents? I cant say since I have never needed to do this but I have thought of doing this if too humid a day..
The hairdrier is just like direct sun, not good at all. Heating the top surface will dry the top layer and keep the reducer from coming out. This will cause bubbles and major problems. A cool place outside direct sun at room temp is best to let the panel dry out and cure. RH DSD
Oh damn. :( I had a similar prob many moons ago with my BMX bike, I painted it a real nice blue, spent hours prepping and getting it right, but rushed the paint, ended up shooting clearcoat too early and heavy, it pulled and crinkled the paint up to 2mm tall in some spots, almost like a crazy stucco job. I was really bummed because of it, but since then have re-painted and it is fine now. :)
you dont no to use the gun spray thats you'r prob
lem
BlackShadow3060 5 months ago
@BlackShadow3060 when someone like this guy can do a professional job with just spray can, That's when you know he's REALLY GOOD!
EasternMerchant 4 months ago
can i sand out a big run and then reaply clear
samanthasavage4 6 months ago
@samanthasavage4 Sure you can. just be careful to only sand the run surface rather than the clear that surrounds it. When it is smooth or fairly smooth. re apply clear and keep sanding smooth. Easy as that!
DIOSpeedDemon 6 months ago
please dont paint no more...anything...ever!!!
mikaso20042000 7 months ago
@mikaso20042000 AMEN to that one
MXMSKustomShop 6 months ago
your base coat is like a outside wall on the house man..
choda88bre 8 months ago
Duplicolor is LACQUER!!!!!!!!! It will attack anything BUT LACQUER...
This is a reaction that is, you are experienced, you should know why this is happening. You should have used Urethane Clear with an activator.
MrHandy2010 9 months ago
i think in the previous video you put it on too thick in one coat.
paulhunter123 9 months ago
wow you're a real expert, duplicolor? that must be a professional grade clear coat that ive never heard of
debobeats 1 year ago
@debobeats Yes I am and Expert Painter. Look at my end work. It dont lie. Duplicolor is the professional grade of 4-5$ spray cans. See, you just learned sumthing new... Dont hate the Playa... RH DSD
DIOSpeedDemon 1 year ago
just use 2 pac and you don't get all those problems
bcrichst 1 year ago
A question...? i think i will paint my scooter and i wonder how many coats of the different paint i need? primer/paint/clear coat?? Plz answer as soon as possible
T0BBi94 1 year ago
@T0BBi94 dont use spray can paint seriously ever!! and dont ask that guy for advice any one that needs professional painting advice can call me @ 832-627 0809 my name is Ed i own MXMS Kustom Shop i paint bikes and do tank and fairing repair for a living
MXMSKustomShop 6 months ago
does it make sense to use a hair dryer to fully flash out the solvents? I cant say since I have never needed to do this but I have thought of doing this if too humid a day..
Ferd
gst69man 2 years ago
The hairdrier is just like direct sun, not good at all. Heating the top surface will dry the top layer and keep the reducer from coming out. This will cause bubbles and major problems. A cool place outside direct sun at room temp is best to let the panel dry out and cure. RH DSD
DIOSpeedDemon 2 years ago
Comment removed
gst69man 2 years ago
I hate when paint comes out looking like an orange peel
HHO4ALL 2 years ago
5AM DANG! construction worker hours, I know what thats like
TerribleTimes 2 years ago
Oh damn. :( I had a similar prob many moons ago with my BMX bike, I painted it a real nice blue, spent hours prepping and getting it right, but rushed the paint, ended up shooting clearcoat too early and heavy, it pulled and crinkled the paint up to 2mm tall in some spots, almost like a crazy stucco job. I was really bummed because of it, but since then have re-painted and it is fine now. :)
LARC0 2 years ago
nooooot good
crapgeey 2 years ago