The problem is it's a brand new rotax and your going full out without warming it up first the first session ever u should put in a 168 jet and do a bit of laps going pace lap speed (you probably didn't do this and that's why your engine broke) after that just go out every day and before each session make sure your water temp is at least over 35 degrees Celsius and put in a smaller jet.
Thanks @henkdecitroen13 Actually it was the result of defective seals. Really easy fix. A lot of smoke, but no real damage. The Rotax engines are really solid in my experience (other than this one).
@HeadChip that is something different.. these engines are allmost indestructeble.. so its pretty weird this happens with this engine.. i had a 100cc myself and had this for about 3 times.. now i have a rotax and it's much better!
I'm only sixteen and the times i go to mosport without my dad brian's there when i need help with the main jets and what not and the chassis set up. i run a 2007 intrepid cruiser with a senior rotax on it. but im racing in masters since im 6'3 225 pounds with a front extension lol. it works really well. i might be going on sunday with my dad maybe i'll see you there
@jamescs9 Hey, this is actually a 2009 Chassis I bought from Ken and Brian and put my own engine on, that was rebuilt and brought up to 2010 spec by Brian. I used to have this engine on an MBA shifter chassis (same one in my shifter kart video) . It is unreal how well it handles in comparison to the old chassis. The engine popped due to a $20 defective seal, and Brian had me back on track in a couple hours. Brian and Ken really stand behind their stuff, and I highly recommend this setup.
nice gloves.
shaggy11ism 2 months ago
looks like a really nice circuit :)
DJExcal 6 months ago
is this felix the cat driving?? LOL with the black arms and white paws
KrAxRACING 10 months ago 2
bad driving. you drift a lot and you lose seconds. it may look fast but it is not.
practise.
champion
alexandarmilojevic 1 year ago
@alexandarmilojevic
This is Youtube. Back up your criticism with your own uploads.
DragonFlyback256 3 months ago
The problem is it's a brand new rotax and your going full out without warming it up first the first session ever u should put in a 168 jet and do a bit of laps going pace lap speed (you probably didn't do this and that's why your engine broke) after that just go out every day and before each session make sure your water temp is at least over 35 degrees Celsius and put in a smaller jet.
BLEHstudios 1 year ago
Ya man that happened because you probably didn't do the slow session to warm it up for the first time
BLEHstudios 1 year ago
nice driving! but what actually happend with you engine????
back-end?
henkdecitroen13 1 year ago
Thanks @henkdecitroen13 Actually it was the result of defective seals. Really easy fix. A lot of smoke, but no real damage. The Rotax engines are really solid in my experience (other than this one).
peterwjmiller 1 year ago
@peterwjmiller
you're pretty lucky! good luck with racing!
henkdecitroen13 1 year ago
nice driving! till your engine problem.. what happened??? and what was the problem?
i own a rotax myself.. but i hope i'll never get this problem.
(sorry for my english)
henkdecitroen13 1 year ago
same shoit hapned wiht my yamaha 100 cc go cart
HeadChip 1 year ago
@HeadChip that is something different.. these engines are allmost indestructeble.. so its pretty weird this happens with this engine.. i had a 100cc myself and had this for about 3 times.. now i have a rotax and it's much better!
henkdecitroen13 1 year ago
good gloves
matiixcoreex 1 year ago
I'm only sixteen and the times i go to mosport without my dad brian's there when i need help with the main jets and what not and the chassis set up. i run a 2007 intrepid cruiser with a senior rotax on it. but im racing in masters since im 6'3 225 pounds with a front extension lol. it works really well. i might be going on sunday with my dad maybe i'll see you there
jamescs9 1 year ago
is this kart a 2010 rotax senior kart straight from the rotax finals? Ken at mosport was trying to sell me one for 6500 i think back in feb.
jamescs9 1 year ago
@jamescs9 Hey, this is actually a 2009 Chassis I bought from Ken and Brian and put my own engine on, that was rebuilt and brought up to 2010 spec by Brian. I used to have this engine on an MBA shifter chassis (same one in my shifter kart video) . It is unreal how well it handles in comparison to the old chassis. The engine popped due to a $20 defective seal, and Brian had me back on track in a couple hours. Brian and Ken really stand behind their stuff, and I highly recommend this setup.
peterwjmiller 1 year ago
loving the gloves
subeefan 1 year ago 5
@subeefan haha, those are the best gardening/driving gloves I own.
peterwjmiller 1 year ago
@subeefan haha, those are the best gardening/driving gloves I own.
peterwjmiller 1 year ago
@subeefan haha, those are the best gardening/driving gloves I own.
peterwjmiller 1 year ago
nice vid man.
mosportkarting6 1 year ago