Question for you...I am looking to put a clutch kit on my 500 as well. What kit did you go with? I see on EPI's site they have two listed for stock tires and also the same two with the belt included. I really want to improve my low end responce on the machine and from your video, looks like it did pretty well on your machine.
@ixxblitzxxi is your gade a 500 or 800? If its a 500 even with the epi you might still have a little difficulty turnin them bad boys in the thick shit, 800 should do fine.
And how does that epi clutch kit do? I will eventually put an epi clutch kit on my renegade 500 as well. The "high performance" one that includes an epi belt. Does that clutch kit you have on yours make it have more "getty up and go?" The 500's are sorta sluggish off the line and are hard to do wheelies on for that reason. And i was hoping a clutch kit, and an hmf slip on exhaust would fix that. Also have you seen more mph on the top end with all mods you have done? Such as exhaust etc...
@somekid908 when i had this bike i was about 130-150lbs and i could get her to wheelie no problem. loved the epi kit, it engages your clutch at a higher rpm so ya its easier to wheelie and it pulls much harder through mid-range but does nothin to your top end speed. with all my mods i noticed about a 5-10mph increase. loved this bike, wish i wouldnt have sold it lol
@Haywire469 ya i plan on putting my hmf slip-on exhaust on as soon as i get my quiet core in, epi clutch kit, skid plates (maybe). But what else did you do to make it that much faster. And i can't get mine up lol i weigh like 115lbs haha
@Haywire469 ya once i get my hmf exhaust on ill go and buy a hmf fuel controller eventually. I will also be putting either a twin air, or a UNI air filter on it. Its got the stock one on now. Neither of those filters will do anything to the performance, but where i ride it is really dusty. So i wont be putting a K&N on it. And i also doubt i put snorkels on it either, although it wouldnt be a bad idea.
Nice quad! I just got a nice used 2009 renegade 500! It is bone stock as of now but im putting a hitch on it, and hmf slip on exhaust (it was included in the sale, but haven't put it on because it would be too loud without a quiet core), Twin air filter, and eventually an EPI clutch kit, skid plates (i have a center skid plate from my dads outlander that will bolt right up), and then last but not least is some new rims/tires. that will come last though because its not a high priority of mine.
@TucksAndSkis sport utility 27-28" tires, it didn't effect the top end it just gets there much faster than before lol, performs nicely offroad, cant complain with the purchase i'm very happy.
nice))))1 more Q)how much did y spent in USA $???if i get it in USA i will put HMF exaust high lifter 2-3 inch lift kit,and i am noot sire about the tieres or kenda exacutioner or vimpiere)
nice)i had a grizzlu 450 it was ok)had some mod on it bud it did not do as well as grizzly 700 or outlander 650....so i got my self for some time a honda 250 trx x )2009 and for my lil brother)but i wont a quad for me)i am wondering if i shell get the out lander or 500 renegade)but now i rather get the gade!!i love it)but the problem in russia they dont sell the gade 500 nither outlander 500!but i wont the 500 how much was yours?and how much money did y spent on instoling clutch and all tuning??
@sepiashvili1993 my gade cost around $9000 canadian. i've got quite a bit of monney into it though. another 3000. i'd definitley recommend the gad over the outlander!
@sepiashvili1993 the renegade 500 is the same size as the 800, just less power, mines been modded slightly so it does pull harder than stock, it has an HMF utility pipe with a fuel optimizer. thanks for the comments and sub!
i was thinking about buying one of these 500 renegade and just wondering if u think they have enough power
pbfboy56 1 month ago
What tires do you have on that?
19mudbogger98 3 months ago
where did you got those snorkels??
Erach9617 4 months ago
@Erach9617 eastcoastsnorkelkits, I dont think they are still in buisness though
Haywire469 4 months ago
Question for you...I am looking to put a clutch kit on my 500 as well. What kit did you go with? I see on EPI's site they have two listed for stock tires and also the same two with the belt included. I really want to improve my low end responce on the machine and from your video, looks like it did pretty well on your machine.
33scraff33 4 months ago
@33scraff33 i believe i had the sport utility kit for 27-28" tires, i also had the severe duty belt
Haywire469 4 months ago
im about to get an EPI clutch for my renegade... do you think i will be able to turn 27 inch silverbacks well?
ixxblitzxxi 4 months ago
@ixxblitzxxi is your gade a 500 or 800? If its a 500 even with the epi you might still have a little difficulty turnin them bad boys in the thick shit, 800 should do fine.
Haywire469 4 months ago
And how does that epi clutch kit do? I will eventually put an epi clutch kit on my renegade 500 as well. The "high performance" one that includes an epi belt. Does that clutch kit you have on yours make it have more "getty up and go?" The 500's are sorta sluggish off the line and are hard to do wheelies on for that reason. And i was hoping a clutch kit, and an hmf slip on exhaust would fix that. Also have you seen more mph on the top end with all mods you have done? Such as exhaust etc...
somekid908 6 months ago
@somekid908 when i had this bike i was about 130-150lbs and i could get her to wheelie no problem. loved the epi kit, it engages your clutch at a higher rpm so ya its easier to wheelie and it pulls much harder through mid-range but does nothin to your top end speed. with all my mods i noticed about a 5-10mph increase. loved this bike, wish i wouldnt have sold it lol
Haywire469 5 months ago
@Haywire469 ya i plan on putting my hmf slip-on exhaust on as soon as i get my quiet core in, epi clutch kit, skid plates (maybe). But what else did you do to make it that much faster. And i can't get mine up lol i weigh like 115lbs haha
somekid908 5 months ago
@somekid908 hmf slip on with efi fuel controller and k&n air filter, straight snorkels for better air flow ran 91 octane in it also
Haywire469 5 months ago
@Haywire469 ya once i get my hmf exhaust on ill go and buy a hmf fuel controller eventually. I will also be putting either a twin air, or a UNI air filter on it. Its got the stock one on now. Neither of those filters will do anything to the performance, but where i ride it is really dusty. So i wont be putting a K&N on it. And i also doubt i put snorkels on it either, although it wouldnt be a bad idea.
somekid908 5 months ago
Nice quad! I just got a nice used 2009 renegade 500! It is bone stock as of now but im putting a hitch on it, and hmf slip on exhaust (it was included in the sale, but haven't put it on because it would be too loud without a quiet core), Twin air filter, and eventually an EPI clutch kit, skid plates (i have a center skid plate from my dads outlander that will bolt right up), and then last but not least is some new rims/tires. that will come last though because its not a high priority of mine.
somekid908 6 months ago
soo i want one now
thomassmth942 6 months ago
how much did the the quad cost?
IatvProdI 8 months ago
@IatvProdI $9000cnd
Haywire469 8 months ago
@IatvProdI $9000cnd, bone stock
Haywire469 8 months ago
lucky bastard...this is all behind your house
loctoman213 10 months ago
funny cat 1:09
rcdude34 10 months ago
did you have it in low range while pulling cat walks and how did you get it up
mxz550xkid 10 months ago
@mxz550xkid mix between low and high range, epi clutch kit helps with gettin it up, kinda like viagra for a quad LOL
Haywire469 10 months ago
where is this?
gavin91112 1 year ago
wish i could ride with you fun trailes
supersnowboarding1 1 year ago
nice atv man. how much was the clutch kit and was it easy install? and what is your top speed on the 500?
yobie732 1 year ago
@yobie732 i bought the clutch kit and a sever duty belt for around $350 cdn. very easy install, approx 45 mins. top speed now is about 100km/h
Haywire469 1 year ago
@MrBishopss i think that was my neighbors cat haha, shoulda hit it.
Haywire469 1 year ago
Awesome off road spot man. wish i had something like that behind my house. I'm jealous!
jwth2005 1 year ago
Sounds awesome n that was some respectably deep water. My old raptor660 wouldn't dream of touching it.
xtmracer91 1 year ago
Can you feel a difference with the clutch kit
TucksAndSkis 1 year ago
@TucksAndSkis big difference bottom end and pulls way harder through mid range
Haywire469 1 year ago
@Haywire469 What is the name of the kit? Have you lost top end? And does it still perform well offroad?
TucksAndSkis 1 year ago
@TucksAndSkis sport utility 27-28" tires, it didn't effect the top end it just gets there much faster than before lol, performs nicely offroad, cant complain with the purchase i'm very happy.
Haywire469 1 year ago
nice))))1 more Q)how much did y spent in USA $???if i get it in USA i will put HMF exaust high lifter 2-3 inch lift kit,and i am noot sire about the tieres or kenda exacutioner or vimpiere)
sepiashvili1993 1 year ago
@sepiashvili1993 when i bought mine the price in USD would have been about $7900.
Haywire469 1 year ago
nice)i had a grizzlu 450 it was ok)had some mod on it bud it did not do as well as grizzly 700 or outlander 650....so i got my self for some time a honda 250 trx x )2009 and for my lil brother)but i wont a quad for me)i am wondering if i shell get the out lander or 500 renegade)but now i rather get the gade!!i love it)but the problem in russia they dont sell the gade 500 nither outlander 500!but i wont the 500 how much was yours?and how much money did y spent on instoling clutch and all tuning??
sepiashvili1993 1 year ago
@sepiashvili1993 my gade cost around $9000 canadian. i've got quite a bit of monney into it though. another 3000. i'd definitley recommend the gad over the outlander!
Haywire469 1 year ago
and do y have dif exaust n this video or is it stock>
sepiashvili1993 1 year ago
@sepiashvili1993 the renegade 500 is the same size as the 800, just less power, mines been modded slightly so it does pull harder than stock, it has an HMF utility pipe with a fuel optimizer. thanks for the comments and sub!
Haywire469 1 year ago
nice video man!1 quastion is renefade 500 is much slow and smoler size aswell???ot are they close size and just lil lase power?
sepiashvili1993 1 year ago
was that a fart a 0:14 ??!?!?!
xllxAndrewxllx 1 year ago
ha!
MattLaurinMNTL 1 year ago