Behringer PB1000 Pedal Board Quick Overview/Preview description

[pandis1993]

Does this work with BOSS, Ibanez, Electro Harmonix, Digitech and MXR-pedals?

[DiFuXioN]

@pandis1993

most pedals have same voltage so that is not a problem

you should check +/- and if they are the same (which most are) they should work

I have used DANELECTRIC pedals and they work I think many others should also

hope that helps

[MrMischamadness]

stupid question,

but does this thing includes the pedals?



[DiFuXioN]

@MrMischamadness

you will need to buy the pedals but Behringer pedals are cheap and mostly range from 20$ to 40$ and are a great alternative. there are many other high end pedals around to choose also that work with this pedalboard

[MrMischamadness]

@DiFuXioN thnx man

[Jacklovesrock]

how do u keep the wah up

[DiFuXioN]

the switch is sping loaded so it auto pops up again

does that answer correctly?

let me know

[soundmethod]

Dude I think you have nail fungus. You might want to check that out.

[DiFuXioN]

You might want to check your eyes! Sorry, but what the HELL are you talking about? my hands are moving so much my nails can barley be seen. I actually cleaned my hands and nails for the video, being that it would be viewed worldwide and all that crap. There is nothing green or black in my hands or nails and the video is not about them but the pedal board. Anyways it's a funny comment in a stupid kind of way so I'll leave it around so others can notice your male nail FETISH!!!

[crgbts1]

no, i think soundmethod is right you better go check that out, nah just messin wid u hahaha

[DiFuXioN]

yeah, yeah... sure, sure :p

I'll check with a Doc some day...

Thanks for posting :D

[soundmethod]

It is good you have a sense of humor. You shall go far my son !! ~PEACE~

p.s.. Great video. I keep watching my UPS tracking number to see when mine is going to get here. Good Job !!

[DiFuXioN]

Hey if I let every comment bother me I would have stopped adding videos a while back...

But considering all the people who watch these videos I must say, I am not doing so bad :)

[sichadeb]

Is the supplies power source compatable with boss pedals??

[battuspuppius]

@sichadeb Yes, 9VDC, negative pin. I just ordered one and have some Boss pedals to put in.

Cheers,

Battus

[DiFuXioN]

THanks

[DiFuXioN]

I believe all pedals use 9V you just have to check polarity +/- but I think they should all be the same. in which case the power should be compatible with most if not all pedals...

[Gaza880]

Could i Fit A Crybaby AND a Whammy Pedal in that part u can take out??

[DiFuXioN]

I did not use the inserts for the WAH and there is a very large space for any WAH pedal to fit I think. Also the inserts are FOAM and can be cut to size any pedal...

I made another video with my new AMP recently and added a bit more on the pedalboard also, you might want to give it a look...

[Gaza880]

but can they both fit in thats the answer i want!

[DiFuXioN]

Hey

it can fit 10 regular pedals and you can play with the space however you want so you can mix it like I did or use less small pedals to make way to bigger WAH or others...

depends on how many pedals you have or want to fit overall, but I think that 10 Pedals is kind of over the top. I ended up using noise reducer and flanger as fillers to complete my set...

[raqugo123]

can you close the pedalboard well? i can close very well because i have a crybaby and is to tall

[DiFuXioN]

yes I can close it my Wah is behringer so it fits OK

I removed the foam on that side and I had to use 3M 2 side tape to avoid it from moving around

[inertiatic4]

Can you use this pedalboard for.....lets say a line 6 DL4??

[DiFuXioN]

I believe you are talking about a pedal or AMP

yes it should work with any AMP and most pedals should fit.

for the pedals you need to know polarity so you can fix this if needed.

it has foam inserts you can cut if requiered to fit almost any pedal...

[raqugo123]

where do you buy that pedalboard?

[Animatronica]

hi there

great vid, very useful

do you recommend covering the inside of the pedalboard where the pedals sit with carpet (using epoxy or whatever sticks the material to the inside of the pedal board) and sticking velcro to the base of the pedals to make them stick to the board without the foam etc?

[DiFuXioN]

the pboard has some foam inserts that cover the space not used but if you want to add something else thats up to you.

use your style, go wild. it's your PB might as well have it as you like it.

P.S. you can use Velcro if you want I used 3M 2 face tape to keep the WAH in place

[Animatronica]

Cheers for the tips man :)

I was wondering what would covering the inside of the board with carpeting to stick your pedals with Velcro to. Less screwing around if you decide to insert a pedal in the chain, you don't have to take out everything, just more the pedals a bit. Just my two cents.

About your WAH, you taped it down, or double sided tape?

[DiFuXioN]

Thanxx

I think the velcro would work, but would also lift the pedals a bit. you can try if you like.

the wah is taped with 3M two sided tape. I had to remove the rubber stomps for this, but it worked out pretty well

[Animatronica]

Yeah though about the pedals rising a bit too.

Anyways, thanks for everything man, take care n happy guitar playin! :)

[DiFuXioN]

THNXX

[mfx999]

is every pedal using same charger/adapter power or do you need to out battery on every peda?

[DiFuXioN]

yes the pedalboard has 1 AC adapter and a daisy chain cable to add all the pedals you need with 1 plug

[raqugo123]

hi man!, how do you hold the wah???

[DiFuXioN]

Hi

I removed the rubber "stump's" under the pedal that usually lifts the pedal a bit and used 3M two face tape on the metal part below the pedal to the pedal board.

that's about it...

[ElGbayRGX]

Thanks man i think for september im going to make my own video!!!!!!!!!!!

[DiFuXioN]

let me know I'll check it out