Dr Stiffler's gas produced with a Slayer exciter

[Begbucks]

Subbed Good work!

[tectalabyss]

Liked your Video Very Interesting way to make HHO...Added to My Favorites and Playlist.Thank you for sharing...Tec

[jonnydavro]

Thanks tectalabyss.Glad you enjoyed it.Just goes to show that there are plenty of things still to be discovered.Jonny

[tectalabyss]

@jonnydavro Thanks for the reply.. Is there any heat generated ?? and will the gas coming off burn The same has normal HHO ??? This has me very interested...And you are very correct there are so many new thing to discover !!Thank you again..Tec

[ilav1m8y]

You should use Test Tone software to both power your SEC and do a Square Wave frequency scan between 5Hz to 20000Hz to tune into the resonant frequency of your Square coil just using an led ligyt brightness to determine resonance and find the highest peak then you could overlay a second Schumman earth resonance frequency then ground both coils to see if your signal had traveled @ 1.5 times the speed of light and generating hydroxy gas at the same time and see if the output is greater than input?

[jonnydavro]

@ilav1m8y What i would really like to understand is Tesla energy transmision via the earth,Eric Dollard talks about this in his longtitudanal waves vid and has replicated it.Do you know how to do that?Would like to know how far you have gone with the Meyer technology.I presume you have not bought any petrol for the last 14 years.

You have given me a lot to think about in your posts so thanks for that.I hope you have got something from my vids and not just a good laugh.Jonny

[ilav1m8y]

Been there done that, I'd replicated Stanley Meyer technology something like 14 years ago. This'd blow you away the excess energy doesn't come from coil resonance or resonating the water molecule the energy actually comes from the Space between the Water Capacitor plates- directly from SPACE (Quantum Fluctuations or whatever). See MEGA- Pic and you could copy Meyer's original equation, ya LOSER. I'd laughed at your video.

h t t p : / / w w w . megaupload. c o m / ? d = X O W 8 V K G Q

[tectalabyss]

@ilav1m8y I find it hard to understand why If people don't have anything nice to say They would just give info to help instead of this Childishness of name calling it doesn't serve any purpose.. This is all I will say on this!!!Thanks Tec

[ilav1m8y]

When you increase the area, you're increasing your NEGATIVE DIPOLE, just like a bimbo the negative energy wants to be used so you create work for it to do like increasing the surface area and like a bimbo your expenditure amp draw will actually decrease the more work is done. Its akin to the cold current escaping the confinements of the wire.

This will sound dumb as but, try connecting the cell (antenna) to a Neon light and then to the ground to capture more radiant field energy.

John

[jonnydavro]

Hi ilav1m8y.I will try that next time i set it up.Thanks for your comment and interesting explanation.Jonny

[brianempson]

What happens when you increase the surface area?

[josephdupont]

looks good.. how many amps and how many cubic inches.

have you confirmed that it is hydrogen only??

[camelsonhorizon]

NEXT, WOULD THEN BE A NICE QUARTZ CRYSTAL WRAPPED WITH THICK WIRE IN A COIL, STAINLESS WIRE.

[MrCletushowell]

I think you do have the blues and red the first transmitter is blue coil is red then center tube blue then coil red then tube blue thats the whole axis of infinity the five so if some how combine all five you get your four corners of the earth polarity so you cracked way more then you realize just have to put them together and figure them out

[MrCletushowell]

dont overlook the red lights in the magnifyer there your frequencies ive seen them on three videos your 1/3 the power blue ice red flame blue torch find the blues

the red tape around your coil is building your gas more then others some how I have the color frequencies everything comes from magenta wich is red and blue its your primary color green is bending light thru water of red and blue.

[MrCletushowell]

so what im saying is I beleive the oxygen is being tele transported thru the glass to the coils using the harmonic shear bose einstien condensation I beleive is the term that the oxygen is a smaller molecule then the glass hence goes right thru then bond with carbon and then when you blow the hydrogen back up it find the oxygen again

[MrCletushowell]

how to find the oxygen use carbon the oxygen is unstable and should instantly bond to carbon so you must have carbon dioxide the amount of hydrogen you can split I think is directly determined by the amount of carbon you can pair with oxygen or pair anything with the oxygen so essentialy your reversing the process of combustion. instid of spliting carbon fuels by combustion your spliting oxygen I hope im explining this right. when hydrogen finds the oxygen it blows up again

[Dilekz]

Only 4% of all hydrogen is created out of electricity due electrolysis. Why? it's not efficient. How efficient is this? ( in numbers!)

[crusiatusblack]

@jonnydavro yes he did and they all produced gass but, I'm getting the feeling that your single diode produces more... Am I wrong here? I'd love to see you trying more diodes, I'm staying tuned!

[harpbloke]

hmm cant wait for the tip from dr s on how to stop the breakdown of the diode leg, very exciting this is, pardon the pun.

thanks for being so attentive with this work.

[ashtweth]

Jonhhy you , Slayer and Lid have some natural aptitude we all would love to replicate, well done man , thanks a lot

[Pirate88179]

Jonny:

Your experiments are amazing! I saw Dr. Stiffler's video on this just the other day and already you are replicating and getting really good results.

Please keep up your very good work.

Bill

[jonnydavro]

Hi Bill.Many thanks.I have further increased output since this vid but dropped all my testubes and have not got a clue where the rest are .Oh well.Cheers.Jonny

[GBluer]

Wow Jonny that is a lot of gas comming off the diode.

Very nice job.

[jonnydavro]

Thanks Slayer.Yet another use for your great circuit.Hope you try this too.Jonny

[m3sca1]

interesting stuff indeed-i agree with the others -need to burn some to see if it H or O or both,because that might shed more light on what is going on here.

good job replicating stifflers results-also im glad you dont turn off the comments like stiffler does-which stifles the brainstorming.

[jonnydavro]

Hi.i hope its hydrogen too and Dr Stifflers says it will burn so its looking good but as we are doing it different it would be prudent to check for ourselves.I will do the old splint test at some stage and i have had some great suggestions and idea's from people's comments so i take them all,good or bad.Many thanks.Jonny.

[m3sca1]

@jonnydavro due to it being a one wire setup i believe your end result will be the same as stifflers regardless of the method used to generate the voltage-its not the first time i have seen others use something other than his SEC to achieve same results-there is definately 'more than one way to skin a cat'.

keep up the good work jonny

[Cloxxki]

Lot sof gas indeed, great work! Now let's hope the diode can be kept un-oxydised and running forever. And of course, hopefully good MW or even OU to be found, that can be scaled. Please be safe when you collect the gas, don't handle it directly, don't pressurize, etc.

[jonnydavro]

@Cloxxki Hi.The cathode of the diode is eroding but Dr Stifflers says this can be solved with a purpose made carbon electrode diode but as that does not exist,we will have to find another way.Any ideas?Jonny

[mrBr00k5]

Good work! This is some interesting stuff!

[jonnydavro]

@mrBr00k5 Many thanks.Maybe more to come on this yet.Jonny

[CarbideTip]

Can you increase the surface area of the anode? Cover the top of the tube to build up gas. Remove and ignite to see if it burns or bangs. That will tell you what gas its producing.

Good work JD.

[jonnydavro]

Hi Increasing the surface area of the anode is on my to do list and may help.The fact that i am using a small diameter testube probably contributes to the high gas output i am seeing also.I have already managed to increase gas output since this vid and may make a vid of it.so stay tuned.Jonny

[chungsan1]

IS that Oxygen or hydrogen ?

[jonnydavro]

@chungsan1 Hi.Not to sure yet.Got my fingers crossed for hydrogen as this is a replication of an experiment Dr Stiffler has done and he tested hydrogen.Jonny.

[janne808]

Good work. This is probably some form of radio or photolysis.

[jonnydavro]

@janne808 I think it is electrolysis as i am seeing a small amount of gas being evolved at the cathode now i have increased the output further since the making of this vid.Radio maybe involved with the wireless side as the two coils are acting as a transmitter and reciever and are very well matched.Thanks for your comment.Jonny.

[marthale7]

I guess can one put the gas in a balloon and then try to ignite i to verify it is hydrogen. I agree with you hard to call it electrolysis until we verify that is what it is.

Nice experiments. Also you can't trust the voltage output numbers on the wall adapters, they are often higher than what your setting says. As always awesome work.

[jonnydavro]

Hi Mart.I am seeing a small amount of gas of the cathode since i have ramped up output with a mod i have posted at the energetic forum so i am more comfortable calling it electrolysis now and thanks for the heads up on the wall adapter.The 12v setting is putting out 16v but this electrolysis will occur on as little as a 1.5v battery.Cheers.Jonny

[rroge5]

how do i make one?

[jonnydavro]

Hi rroge5.This is very easy to make.The hardest part is making the large L1 coil which takes a coupe of hours to wind but well worth the effort.I am using the bare bones Slayer/aka gbluer exciter which is just Two coils and a transitor and a 16k resistor.Search gbluer for the circuit diagram and the electroliser is just a testube with a 4148 diode and a piece of tin foil ,wrapped round the tube and connected to the exciter output.All details and help can be found at the energetic forum.Jonny.

[jonesb1v]

What happens when you use a bundle of diodes instead of one?

[crusiatusblack]

@jonesb1v I think I've seen Lidmotor doing that already, but I'm seeing more gas over here.

[jonnydavro]

Hi Lidmotor has done the multi diode test using Dr Stifflers SSEC and all are producing gas so i am pretty sure we will see the same thing using Slayers exciter.Just got to get some more diodes and i will test if someone else does not confirm this first.Jonny

[jonnydavro]

Hopefully,all will produce gas and the amp draw will stay the same so i will put that on my to do list.Dr Stiffler says this is the case so we shall see.Thanks.Jonny.

[ashtweth]

That's a lot of Gas Johnny wholly crap. Well done, camera worked well with the magnifier thanks for posting

[jonnydavro]

Hi Ash.I have further increased gas output since the making of this vid and found you can daisy chain electrolisers.I have posted a diagram at the energetic forum.Check it out if you get the chance.Many thanks.Jonny.