Added: 2 months ago
From: Sturmgewehre
Views: 54,335
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (259)

Sign In or Sign Up now to post a comment!
  • should I have any concerns with this staock in California. Was asking about them at a few gun shops in Sacramento and everybody had a different answer

  • Will that ak stock work for a romanian m10 762?

  • Does anyone know if that finger rest gets in the way when firing semi auto?

  • How do you think the quality of these semi automatic rifles will hold up with more and more use of bump fireing? I would like to buy this stock because it looks like a ton of fun but I am afraid to wear out my rifle way too much with over excessive bumpfireing seeing as these rifles were meant to be semi automatic.

  • @IdeaCalledFreedom Unless you're Bill Gates, I doubt you're going to buy enough ammo any time soon to wear your rifle out. It would take quite a bit of shooting to do noticeable damage to a good quality rifle. Use good judgement, such as not running 5 magazines back to back as fast as you can to keep the heat down on the barrel, just do one or two, then let the gun cool before firing a couple more and it will last a very long time.

  • Install this on a Dragonov SVD or something big xD big recoil big time

  • You can shoulder bump just as easy with a rubber band and it won't cost you hundreds of dollars

  • @pjh3kyh Not as effective.

  • @Tylerchilton filing down the firing pin would not make it full auto, it would make the gun not shoot at all, saying that would make it full auto is kind of like saying "if i unplug a fan then it will go faster"

  • I kinda wished they would of patterned the AK stock after the AR. I dont like the look of the AK bump fire, all my AK's have AR style buffers and buttstocks.

  • Really wish there could be a wooden slidefire stock, for aesthetic reasons.

  • @HillSavage72 Have someone duracoat it to give it a wooden look.

  • Sigh....now I just have to spend even more money and buy one of these for my WASR...

  • @pCfReAke Lol, sounds like myself. I bought the WASR for economic purposes, but have put more into it than what my M4 cost me.

  • This is cool, but its way to short for me, I run six position M4 style stocks on my AKs and usually have them fully extended and I have gotten quite good at bump firing from the shoulder, just too much money, too short, and too ugly for my tastes. Cool concept though.

  • to expensive for me.

  • Will this work with a MAK-90 Sporter?

  • could or is one made for an sks?

  • @Glockman1011 No word on if Slide Fire is working on a stock for the SKS. I know the Bumpski is going to have an adapter for the SKS according to the makers. Check out my review video of the Bumpski.

  • totally rad review you told it just the way it should be done. very good info!!

  • your review is awsome totally done well! i have a ar bump fire stock totally fucking fun, and now its time for my AK stock! rock on!

  • As far as I'm concerned, that might as well be fully automatic. That's what it is.

  • Finally a good video showing this stock up close, Great video.

  • way too much money for this stock. I'll pass

  • ★★★★★

  • Can I put this on my Dragunov? muhahaha!

  • Would this stock fit on a WASR-2 AK-74?

  • @bigsteveo53 just bought the ssar-15 and the ssak-47, put the ssak-47 on my wasr 47 and within one mag i was sending out 5.45 faster than i could keep my buddys back from trying to shoot it, it works great, only con is where the 5.45 has less recoil than the 7.62 may need a lighter trigger, but once you get the hang of it( 1 minute of trying or so) it works great. side note, your dog will go ape sh*t. lol

  • @bigsteveo53 ment wasr 74, not 47. btw

  • Is the price of this a deterrent of sorts? I don't see why it's so expensive compared to other stocks.

    It should, of course, cost a bit more...but not that much.

  • dude. i. want. one.

  • Wondering why you would need this when an AK is so easy to covert between semi auto and full auto. all you need is a twist tie and to file down the firing pin

  • @tylerchilton I dont know maybe because that would be illegal.

  • @tylerchilton The stock is legal, what you're talking about is a federal crime that will land you in club Fed for 10 years.

  • @Sturmgewehre what a dingbatted question...

  • @Sturmgewehre cause people are dumb. its easy to convert it and if your smart about wherer you go shooting, aint much gunna happen.

  • @tylerchilton So making an illegal full auto to shoot for fun is worth the risk of going to jail for 10 years, losing your rights, and havin to pay $250,000 in fines? Don't be stupid.

  • @Sturmgewehre so this is basically full auto with this stock?

  • @Sturmgewehre not to mention you cant buy guns anymore

  • @tylerchilton how would you go about doing that, i'm curious..

  • @tylerchilton That is probably the dumbest thing anyone has ever said. First off, I'm not even sure how making the firing pin shorter would make a gun full auto and not just plain old broken, and secondly, if it did work, you have 10 years to think about how dumb you are in between cornholings in the prison shower. Seems like $300 is a small price to pay to not be another dude's prom date.

  • @tylerchilton first off, you need to quit listening to the "shade tree" gunsmiths, the wire tie thing does not work, all you are doing is tying back the latch, which does not reset the hammer with the bolt, it only lets hammer ride with the bolt forward, rubbing the firing pin and not striking it, so to overcome this you file off some of the firing pin to shorten the length, in theroy of course. not to mention if it did happen to run a few rounds, you just made an illegal firearm

  • @tylerchilton cause some people dont want to go to jail. i dont, but where i live the law dont give a flyin shit.

  • Would this fit a stamped SGL-31 in 5.45?

  • @Armand1694 Yes.

  • so i would have to get the other trigger guard etc. ?

  • THAT. IS. AWESOME.

  • will this ruin the barrel of my ak?

  • Hi. great vid. Is the stock robust? Would it stand up to being used in battle rifle scenario?

  • @mattjett8 I don't believe it is that durable.

  • so this wont work with the saiga 7.62x39 ? i have the one with the skeleton stock.

  • @VECCMV So long as you have the part that comes out of the end of the receiver (shown above his index finger at 2:43) you should be good. If that was cut off in order to attach your stock then it won't work. Also your 7.62x39 Saiga would NEED to be converted to AK standards.

  • Holy crap... You can make your Saiga shotgun (basically) an automatic?

    I just happy peed, a little.

  • I notice the selector switch is too close to the grip and thats not good because its causes a bruses in the hand, i think the bumpski is more better design the only downfall is too expensive.

  • Hey asshole. It was a fucking metaphor obviously you can't turn an m4 to a saw literally. it was more of a joke then anything. Notice how a saw is 556 and takes ar mags

  • "Without that spring, the ATF would have a very hard time banning this stock." Are you serious? You obviously don't know the BATFE very well. The BATFE does WHATEVER THE HELL THEY WANT! They don't even apply their own rulings/regulations uniformly. Pair that with the fact that the Obama regime is HARDCORE anti-anything-gun and you have a BATFE that can and will ban, regulate, tax or confiscate damn near anything. If Obama gets 4 more, your Slidefire stock will be history, guaranteed.

  • @guns4good The ATF has approved several stocks and the SSAR15 has now been on the market for over a year with literally hundreds of thousands of units sold. Under the current law, the legal experts I've spoken to say that it would be nearly impossible for them to ban these devices unless they redefine the legal definition of a machine gun or outright ban semi-auto rifles. If your crystal ball is more accuracy than mine, please send the the lotto numbers for next week. :)

  • @Sturmgewehre No crystal ball needed, the BATFE is notoriously authoritarian--even under more conservative administrations. Even some of their experts can't tell you what makes a firearm a machinegun. Their definition of an "assault rifle" is totally wrong (a civilian-legal, semi-auto AR-15 is NOT an "assault rifle"!) Legal experts say a lot of things; that doesn't take into account the unpredictable and arbitrary nature of most BATFE rulings. It was approved before it was banned.

  • @guns4good look if the atf wanted to get rid of it they already would, i read a story about a military vet whos ar15 malfunctioned and the hammer slipped of the disconnect. he had lent the rifle to someone interested in buying it. so basicly if the atf wants to screw your life over or ban something you own hen they will you cant stop them so you might as well enjoy it while its allowed.

  • @mark16443 Right, the BATFE can and will screw you over if they want to--they are trying to prosecute that Veteran for owning an illegal machinegun when even their experts can't duplicate the malfunction and can't ID the gun as a machinegun; yet they still want to ruin the guys life. I don't disagree that you should have fun while you can. I'm just saying that the BATFE is authoritarian and inconsistent with their application of their own rulings/regulations. I want a Slidefire stock.

  • Which is faster. Bumpski or slidefire?

  • @cdimic They produce the same results in my experience.

  • @Sturmgewehre i like that answer, i really am favoring the bumpski simply because of its all aluminum design as well as the fact that the pistol grip is removeable. I was always afraid the slidefire would snap off if used in a shtf situation.

    Thanks for the quick reply, would you say the bumpski is as durable as the rest of the rifle (ak)? Im looking to get this in a shtf situation.

  • @cdimic I would say that I could easily damage the SSAK47 stock with rough handling. I would fear snapping it off if you did a pushing with the rifle. The Bumpski is as durable as any stock I've seen on an AK, or so it seems so far. Keep in mind that neither of these devices will like being dunked in mud, freezing rain, sand, etc. Worse case if bumpfire doesn't work because of debris in the action, you still have semi-auto fire.

  • Dear Santa.....

  • If someone can just figure out how to incorporate bump fire technology onto a semi-auto PKM fired from a bi-pod, that would be incredible.

  • my only complaint is its very basic looking

  • What the guy under me said

  • @GageMassoli where'd you get that information from, you are wrong they are both completely different weapons, in no way can you turn an ak47 in an rpd or a m4 into a saw. Youre obviously on a computer so why don't you use it before you post stupid shit

  • Do you think SlideFire will ever make a stock for a milled AK receiver? Also do you know of any other bumpfire stocks that will work for an AK with a milled receiver?

  • Nice,im buying a AK just to buy that stock

  • Make it belt fed and you got an RPD. Ar15 turns into a saw.  And it's legal. I'm getting one

  • @GageMassoli wow you are dumb as hell and that made absolutely no sense

  • why won't the stock work with an akms underfolder?

  • @HellaFlushEvo Because you would have to cut the rear trunion out of the rifle and install a full stock trunion. There's nothing for the SSAK-47 to mount to if you have the underfolder solid rear trunion.

  • Awesome review!

  • Very nice review.

  • Will it fit my luger mini 14

  • will it fit my vz 58

  • Great vid!

  • My ak has no stock and pistol grip semi auto I like it short for home safety it isn't allowed to leave the house since our rights are being stripped away police in my area act like u can't have a gun if they see one they pull there's sick dogs on u taze u and tackle u at gun point 1st then ask for paper work after deeming u deadly since u have to leave it in plain sight but then they see it when asking for ur papers & the above occurs this is why we need to vote for Ron Paul

  • I have a Bulgarian SLR95, one of the best AK's ever made. Too damn bad this doesn't fit on milled receivers, like the SLR. :^(

  • Will this fit gsg ak47 22lr

  • mmm...gonna have to break out and buy one of these

  • Were the people who bought the 10/22 accelerator compensated when the ATF confiscated them?

  • is it legal to use in california?

  • @mrdeeeke Yes. Both the stocks are California legal.

    But don't be surprised if the asshole politicians introduce a bill banning it.

  • @mrdeeeke Nope. I take that back. The fuckers were quick to ban any device that makes you shoot fast.

  • @DeadFishFactory thanks man. it sucks that california's gun laws are strict and counterproductive.

  • @drev5001 maybe americans can wake up and vote the federal reserve out of commission and the ATF and then we can practice our constitutional rights again. problem solved.

  • One of the best if not, the best review on slidefire stocks on youtube. I don't recall any mention about the durability of the stocks though...Do you guys have any comments on this?

  • @kinjomusashi4 I haven't had a chance to break it yet, but I've told others if I put it against a tree and gave it a slight kick I would likely snap it off the rifle. It's more or less a novelty that allows you the ability to simulate full-auto fire. I will be posting a review of a new product that's all steel, much more robust and works just as well this weekend.

  • @Sturmgewehre I have the SSAR-15 SBS (Version 2) (BAZYRKYR?feature=mhee) and it is surprisingly durable. I called them yesterday to ask about buying a new interface that attaches to the weapon because eventually that part will wear out and break because of friction. She said in a couple of months they should be on the market. Also...Fostech bought the patent from Bill Akins and they just released the AA2 that has no spring and an all aluminum AK bump-stock called the Bumpski.

  • @Sturmgewehre Bumpski?

  • Excellent video. Can't wait for tax returns :)

  • North Carolina is one. My county isn't strict at all on automatic weapons.

  • i'd like to ask were this guy lives, were he is able to do these awesome weapon demonstrations my state doesn't allow any full automatic firearms to be purchased by civilians so what state does this guy live were he is able to do this

  • I'm impressed this stock looks like a good range day

  • do you know about legality in Canada?

  • @ELEMENTSFAN666 We can only hope. But i doubt it.

  • Well done review sir. Keep up th great work.

  • so you could use this on a saiga-12 and have a full auto shotgun?

  • @MLGJuggernautgaming It will work on a Saiga 12ga if it's converted to have the trigger in the proper forward position.

  • @Sturmgewehre Does it work on an RPK?

  • Gotta get me one for my sgl21

  • does the require any atf or class 3 paperwork?

  • @shaveddave Nope, it's legal to own without any paperwork in most states.

  • God, make weapons legal in my country. 

  • whats the name of the song @ the beginning?

  • @JustinsAwesomeGames It's not a complete song, it's a short royalty free song.

  • @Sturmgewehre okay thanks for telling ^^

  • :O So... This would work with a 922r converted saiga 12?!

  • question will it blend... in California ?

  • cool but way to expensive.

  • @deltaleader71 meh, vs a 15k m-16 its a steal.....

  • как купить это преспособление

  • Do they come with recoil pads?

  • First off, GREAT VIDEO! This stock works with square cut receivers, as shown in your video, but what about slant cut AK receivers, such as those found on some MAK-90s? Is it advertised for only stamped receivers vs. milled because the average consumer has no skills to mod it to work?  Do these work on the Armi Jager .22s? Some people have had success with their SSAR-15s on their S&W 15-22s with slight mods, but have you tried this on a Armi Jager (possibly Mitchell Arms import)? Or newer .22 AK?

  • Very good video. Thanks for discussing the controversies regarding the stock.

  • Love your vids man,only problem is they make me want to spend money :)

  • It looks awful. That said, I still want one on my Saiga.

  • Ugly

  • Would this work on a Romanian sar-1? It came with a folding wire stock. I would like to get one of these stocks.

  • When are you going to update us on that Mini Draco SBR project?

    What are your feelings on the "Lightning Bolt" that moves the bolt to the left side for the AK?

  • greatest intvention ever

    

  • how are these stocks as stocks? it looks really fun to play around with but they look like the feel kind of "plasticy"

  • This stock is very ugly

  • The price is quite high when you look at how simple the system works.

  • @wilfredotour3 i keep reading this same comment everywhere... but at the same time the price isnt that high when u consider all the man hours the employees put into this "simple system" and honestly i dont feel that the system is truly that simple because if it was you and all the other ignorant people making that comment would have invented it long before SLIDE-FIRE did, right?

  • @ianp2009 Are you serious? The man hours the "employees" put into making this stock tell you that the system is not simple? This stock isn't much more complicated than a collapsible stock with pistol grip. Search for videos and you'll see that some people already created their own bump-fire stock at home, that's how simple the concept of this system is. Now, I'm gonna wait for more manufactures to make this stock for cheaper, like all the other ignorants that have more brains than you.

  • Great vid. Just got mine Thursday. I tried it out & it works fine. It took a little bit to get use to. Once you find the sweet spot it is TONS of FUN. The recoil is very manageable with my WASR.

  • I know this stocks fits on a 74, but will the 5.45x39 have enough kick to make it work right? I really want this for mine but I'd hate to find out it doesnt work well.

  • @int3rc3ptor Considering it's on a AK74 in the video, I think you should be ok. :D It will work fine.

  • @Sturmgewehre See I thought that too, since the mag looks like one etc. But the sound just doesnt seem like one. seems heavy like a 47. could be the camera

  • Comment removed

  • @int3rc3ptor your non firing hand is what moves it not a spring

  • If you shoot from the left side your fucked it looks like.

  • @hobo1958 They are offering a left handed version.

  • @Sturmgewehre ive heard they make lefty versions

  • Comment removed

  • i want to put one on my hunting rifle!

  • seems awesome but its soooooo ugly

  • Great idea with this stock!!

  • does the ssak 47 stock work on saigas? 

  • @bangmeister yes havent heard about it on a .223,btu .308 12guage are a definate yes.

  • @dasdew2 good to know thanks

  • So glad I no longer have to watch more than one review when researching products.  You use concise, permanent and practical information that is invaluable. Glad not to have to sift through the B.S. thanks for all the work.

  • How do you mount a single point sling? I have echo 39 (something like that) single point adapter that mount between the pistol grip and bottom of the am. With that bump fire llooks like you can't use am style single sling adapter

  • You can look at buying the stock this way your paying just $90 for it if you had to pay the $200 tax stamp for a fullauto.Great vid.Would like to see them make this fit a draco pistol after its made into a SBR.Keep up the great work and have fun doen it.

  • Kinda expensive stock but yeah sure looks like fun to shoot trouble is most ranges won't allow it so unless u have a lot of land where u going to shoot it?

  • 20 yards lol,lets see it at 100 yards...

  • @barney1515ful What what that accomplish?

  • @Sturmgewehre Sir would this fit an RPK? :j

  • @1991araaron The RPK is an AK based rifle, shooting the same caliber. Most likely it would. I would wager my own AK to it, I am that sure.

  • @barney1515ful it's not an M60. it's a mid-caliber carbine.

  • @barney1515ful who takes full auto shots at 100 yards?

  • Would LOVE to see a review of a Russian sight on one of those AK's, as western sights on them tend to look bad. Maybe a PK-A or Kobra sight?

  • the AR stock has much better fit and finish

  • So how accurate is that compared to full-auto?

  • Thank's for your reply on the FN 5.7 , I am looking at getting an AR. New of course and in the 1K up possibly a couple hundred more. Want to put a good scope or red dot on it. The Daniels Defense has a good looking rifle and Cheaper than dirt has it for like $1,200.00. I want to be able to reach out 2-300 hundred yards. there is a lot of affordable .223 out right now, not so much 5.56. Anyway, Happy New Year and thank's again. Rick n' Rain.

  • will this work on a wasr 10 with a folding stock? someone plz reply i wnat to buy

  • @sharpshooternick What kind of folding stock. Do you mean an underfolder?

  • @Humberto4790 yes

  • @sharpshooternick Than no because underfolder ak's don't have the holes in the back for the stock. You can put it on an underfolder but you have to get a gun smith to drill into your rifle which will cost alot.

  • sir would it fit my Polish tantal ak 74 thanks

  • @darealpapac It should.

  • @darealpapac I almost bought a Tantal Polish (slide folder 5.45x39) along with this stock, but before I ordered it, the guy at Classic arms told me that the SSAK-47 WILL NOT WORK ON TANTAL style rifles. His advice was for anyone going to install a SSAK-Bump stock, He said for the money and firepower, just buy a standard (WASR10), then install the Bump Stock.

  • @Transhuman2020 Unfortunately that guy is wrong. The Tantal has the same exact rear trunion as a WASR10. If it will fit a WASR it will fit a Tantal.

  • The SSAR-15 stock is so fucking ugly!

  • You should do a review of the new SSAR-15 SBS stock. I would like to know if its as well-made as the OGR. Slide Fire says the stock will work with a few future accessories so I'm interested in what you think of it.

  • Would this work on an ak74 I don't know as I am berry new to guns