Giant kno3/mg Flash Powder Polumna Huge Explosion

[Trapmasta4]

I love the reaction of the guy inside.

[STFUbelgium]

praise the one who made the first polumna ^^

the fun thing about em is, they're always damn hard! ^^

[sickofitall1776]

dam !

[xxXsaintsdarknessXxx]

lol it has to be above 10g for me to enjoy it.

[ejromirp]

kno3+mg is the most powerfull flash powder, because of the mg, but i think that FP made of kclo3/4 and mg would be even more powerfull.

[propyropower]

its not the mostpowerfull.....i dont know if u ever made a fp type with kclo3 or kclo4??? this stuff aint strong in comparision to mgal based fp

[mastermakerhacker]

kmno4 and mgal will detonate in amounts under a gram :D

[propyropower]

oh rofl, how ? when confined into casing's or just laying around ??:P

check my vid's and you ilknow

[mastermakerhacker]

unconfined, just laying around :D....my mg/kno3 will detonate under any confinment but won't detonate just out in the open

[propyropower]

so, i geuss youre talking about hammer tests ? or the unstability?

i have testout alot of factors about kmno4, esspecially in flashpowdercomps, i donot recommend it, i say kclo4,but still i found a sterial way to work with it, thats key...but with not ofc :D\

cheers

[mastermakerhacker]

nope, i have seen my friend do a KMnO4 flash test that detonated, but you have to make it juuuuuust right

[propyropower]

aah lols, like that, i get it now, it's a awesome chemical, the ratio's and mesh sizes are always important to know :D

ask youre friend, i never made kmno4 + S tho, maybe that the trick,

[mastermakerhacker]

the stuff he uses is kno3/mg/sulfur... but i don't know about just kmno4/sulfur...i bet that'd be sensitive as hell

[propyropower]

yea, i think so to, thats why i dont combine those chemicals, also aneedtoknow is the fact of *dirty S* this means acid residu in S this is the factor of spontanious igniting at kclo3 or kmno4, as they are sensitive for acids, on kmno4 i'am not really sure of the acidity level needed to create suche sensitive condition.

[mastermakerhacker]

@propyropower very low i know that, his sulfur has a very low acidity level and he has tested that stuff and it easily detonated, not to mention some of his impact tests looked like armstrongs it was so sensititive

[propyropower]

@mastermakerhacker

yea ofc, it needs lots of time to actually create a spont,ignition but, i do believe with the add of S that the kmno4+metals, becomes extremely sensitive, im gonna make a few testvid's,from 10mg to 1gr,just to see the reaction in place,and yes, it looks like AM under a hammerslam ^^its awesome

cheeers buddy

[mastermakerhacker]

@propyropower

chears :P

[djmadlad09]

look at the guy in the house at 0:31 when the polumna blows up he/she shit them selves

[sparklerbombg]

0:33 that y its called flash!

[sparklerbombg]

whats the most powerful flashpowder out there?

[skarrip]

erm kclo4 based stuff is pretty powerful and loud and one of the saffest you can use .klco3 thats better but it can be set off by friction which is bad

[antiswattt]

i didnt hear a what the fuck... but anyways.. as a pyro i HAVE to share this xD mix ammonium nitrate with charcoal, making ammonpulver (: but you need a blasting cap.. just about 0.1 gram of fp will do it.. some dude i know have a video about it, i gave him the idea (;

[0159352]

mg salut^^

[ArtificialCow]

lol my fp will do that with like 1g...

[zofo300]

lol i always make mine big so im used to that they never go pop they go boom. but good job

[RoushafiedCobra]

Hey outasight, what mesh was the Mg?

[outasight13]

It was about 100 mesh mg.

[pyrogeniuses]

ONLY 100 mesh? im ordering 500 grams of 400 mesh soon,i cant wait to make some polumnas for bon-fire night!hehehe im pysched :D :D and always remember even though 500 grams dosnt seem like much,you need to add another 500 grams of kno3 to it to make fp,so over-all you got 1kg of fp!

[jeffb8074]

take a roll of toliet paper and plug one side fill it most of the way full of flash plug the other side and fuse it and wrap with electrical tape and see wat happens :) i havent tried it yet but i would imagine it would be crazy lol

[morganhv]

awesome

[killdoe]

watch his mom in the window

[dougggh8]

It isn't that loud..

today I lighted a 6 gram polumna that was much harder....

but nice try:P

[zink905]

Watch my 7 grams kclo4-al dark German go much louder then this

[andy10001]

Lighted is lit

well what if his camera did capture the full sound of it. looks pretty legit to me.

o and outsight 3 grams of mg isnt that alot of sanding? haha

[pyrogeniuses]

you can buy 500 grams of mg powder off ebay for 16 bucks including shipping :D

[andy10001]

really sweet i might buy some been always sanding mg bars down

[pyrogeniuses]

lol,how long does that take ya?

[andy10001]

fucking for ever

[pyrogeniuses]

hahahaha!is 3 grams of mg quite a bit though?

[andy10001]

lol yeah that would take like 3 hours

[pyrogeniuses]

but about how much mg is it by volume?

[andy10001]

idk i know it a really fine mesh but is not worth thee time

[pyrogeniuses]

yeah..

[wormkilla]

ebay suck's..

[pyrogeniuses]

why do you say that??

[wormkilla]

what the hell? that reply was from a diff vid..some time's youtube freak's me out! lol

[wormkilla]

where's the vid cheif?

[gupnup]

fudge muffins tropical monkey chimpanzee! that was sweet although i stick to regular crackers aka tube cylinder ones cause i friken tryed to make a decent poluma forvever and i always mess up like i for example dont cover the edges good etc.

anyways ur pro lol 5/5

[BuiltCrazy]

hey.. would u say polumnas are good firecracker casing for fp? btw rly nice fp in there man

[outasight13]

With good flash powder any casing is good. a open-ended toilet paper roll is even good enough, haha.

[BuiltCrazy]

thanks, ill be sure to make some fp explosives today.. maybe not 6 grams.. but some lol

[outasight13]

This flash was not even very powerful. It was the thick paper and tons of tape that made it loud.

[BuiltCrazy]

ok thanks for everything.. im gonna make some kno3/mg/s mix.. anyways.. nice vid and thx for the info

[coopdaloop2345]

i just lit one off with 6 g of kno3/mg and it made my nghbors come out ol

[coopdaloop2345]

when you lit your flash uncnfined was it fast and make a loud pop

[Chickenwing664]

wow

[podgebartlett]

Nice, people say that kno3 isnt good for bangs, their obviously wrong

[grahamjones8890]

scared the crap outa that lady lol

[mcbombs]

5 FIKKIN STARS!!! INCREDIBLE!!! I have made KNO3/Mg flash before, but not that big! I'm gonna go make some! *1 hour later* "how did you lose your hand?"

[errorswe]

is this clean kno3 NO3 61,3% och K 38,7%.

[mcbombs]

???? Are you asking about purity? Yes, mine is pure.

[RBP92]

is that flash more sensitive then perchlorate and aluminium?

[outasight13]

Magnesium reacts with water over time, so this type of flash should not be stored. As far as sensitivity goes, this is probably less friction sensitive because of the less powerful oxidizer.

All flash is sensitive though, just remember that.

[JLsays6]

was that contained or not?

[outasight13]

It was a polumna which is a triangular firecracker made out of folded paper and tape.

[crazypyromaniackid]

check out my profile mine are so louder probly louder then yours but that was pretty good 5star

[MDHmodder]

You know dove in spanish is actually spelled "paloma" right?

[outasight13]

Who cares, its the same thing.

[Imakeflame]

hahah look at the person inside..

[Xxdarkness21xX]

hoy i almost shit on meself!!!

[Pyrotechniker2007]

try a 3rd of the amount ina hose crimped at both ends and isolated with wwick, you be shaken from the pressure wave!

THEY ARE SO LOUD!!!

5 stars°

[FunkyRice]

your polumna videos are awsome! keep em comin' :D

I wish i had access to fp like that

[robinhood1532]

I like how it momentarily rips a hole in the fabric of space and time.

[potsmoker421]

wow that was loud careful with the popos 8)