Adjustment of Turnigy T9x v2 for RC simulator

[SaToMojo]

i tried Pheonix RC Sim with Eurgle 9x, the module is removable (

Even when the module is removed it doesn't work right, my throttle is mixed why my ailerons, all commands are wrong. Any solutions??

[dhyn22]

thanks! it works

[KozmykJ]

You da man Richard 8^)

[Soldier53flyer]

what next? how do I use it on my pc?

[Soldier53flyer]

Thank You you do a great job! keep up the good work!

[Sandor159]

1k ohm = 1000 ohm if i am correct?

[richardmrazek]

@Sandor159 Exactly how you say :)

[aurivando]

Ok 1000Ohms = 1k

[barrovirtual]

Hi! What kind of cable did use use to connect Tx and PC?

Thanks for the video.

Greetings from Brazil.

[aurivando]

Hi, cable USB. Tks

[LTF85199]

what is a module used for? is it not the thing that make the radio waves, so when you are using the Tx as a simulator,wouldn't it be better not to use the module so that it will give you better battery life?

[richardmrazek]

@LTF85199 Hi, battery life? I think, a safe using of radio is more important. And if you will often remove a module, you can seriously damage a wire to antenna...

This is a safe mod, thousands of use...

[archedperson]

@LTF85199 I used a usb to 3.5mm sim cable and transmitter works without the battery when plugged, so you don't have to worry about battery life.

I use the "9 in 1 USB Simulator Cable Support FMS G4/G4.5/G5 XTR AeroFly RC RealFlight" which I got from eBay for 17$. It comes with the above sims plus Phoenix RC 3 and Reflex XTR 5.03

[LTF85199]

@archedperson thanks for the info

[ghassaantalhouk]

thank you. it works with out the module, but it could not be calibrate i have try it so many time without module and i was not been able to calibrate it with the software

[richardmrazek]

@ghassaantalhouk can you try it with "standard" USB interface, with calibrating in windows (in Control Panels in Game devices - joystick) and with for example RC Desk Pilot? How is your interface now? Maybe will be better, if you will send me a PM...

[ghassaantalhouk]

hello. i wanna tell you, that i have done what i have seen in the video, but still my Phoenix Rc sim does not recognized my transmitter. Turnigy T9x

[richardmrazek]

@ghassaantalhouk Hi, and works it, when you remove a modul?

[ghassaantalhouk]

thank you for replying it is very clear in my mind now. the color of the resistor mixed me . i thought it is 1.5k Ohm. as per the chart of resistors color. but thank you very much .

[ghassaantalhouk]

thank i love it, i have try too many things, and i am almost got to buy a Futaba transmitter , but before buying it ( because i have to change my receiver on my helicopter) i will try this way. but i have a question about the resistor what is the size of it can you clarified it it is 1 k Ohm, how many watts. and the one that you have install it has different color then the regular 1 k Ohm resistor. can you please indicate all the description of the resistor that you have used it.

[richardmrazek]

@ghassaantalhouk sorry, but I dont know, how many watts have resistor 1kOhM :)

Simply, you can use any 1kOhm resistor. Now I use a small SMD resistor... And color? Maybe in your country hase a resistors diiferent colors, I dont know. But important is value "1kOhm", not a color :)

[oysterlicker]

This is a one way mod.. Can't use the TX again for actual flying.

[richardmrazek]

@oysterlicker Really?

Hmmm. I must hide it to my radio! Because I flew with this mode many months. And many and many other RC modelers too...

[barrovirtual]

How made the connection to the PC is?

[priv8partz]

Does this modification mess up anything in the er9x firmware. I saw a viewer post that he could no longer change mode 1 to mode 2 in his settings. Is this correct?

[rahimw1]

What signal is being changed? Either the ANT or the modulation. Why does this not affect normal transmission?

[Paxmax]

ok! good mod, just pardon me but I need to say "that was the fricken slowest walk through of my life". Ok, now that's off my chest I feel all better! I need to try this cuz the rc-tech dynam controller(USB, dealextreme) seems incompatible with most stuff except FMS.

[lucky997]

Thanks richardmrazek! :D

[MallNinja223]

I'm working on a new version of this mod that requires no PCB modification. Stay tuned ....

[sandronovecento76]

Thank you.This vid was very helpfull!!!

Regards from Italy.

[RIDERZcouk]

Arggggghhhh

This mode appears to have converted my TX to Mode 1

Great that it works in Phoenix so I can operate without removing the module but useless for my models and me as the tx was a Mode 2 version

Any ideas on a fix for this ?

[richardmrazek]

@RIDERZcouk Hi, this mode ABSOLUTELY can't change a mode of your transmitter... :) I think, this is a "human factor" :) Simple, change a mode in your settings...

[RIDERZcouk]

@richardmrazek

Hi, thanks, you are correct, it was an error on my part, don't know what happened to be honest but all my other models still work OK

Terry

[01VIPER27]

Will this modification affect my flying range? Is there a program I can install instead?

[richardmrazek]

@01VIPER27 No, I fly with this mode for many months (and many next RC pilots, too).

[Duyvain]

Thank Guy!

[richardmrazek]

@rcfunflight

Real Flight, Phoenix, FMS, RCDeskPilot etc etc... :)

[thosm2011]

Nice modification. Unfortunately for some reason my airlerons don't work in sim mode. Nothing to do with this modification.

[bobbyhigh]

Good job!

[konpirotech]

Good  video.